Instruction/ maintenance manual of the product 3750-E Cisco Systems
Go to page of 106
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 3750-E and Catal .
THE SPECIFICATION S AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHAN GE WITHOUT NOTICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 CONTENTS Preface vii Audience vii Purpose vii Conventi ons vii Related Publica tions viii Obtaining Documentation, Obtainin.
Contents iv Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 CHAPTER 2 Switch Installation 2-1 Preparing for Installation 2-1 Safety Warnings 2-1 Installation Guidelines 2-5 Bo.
Contents v Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 Installing a DC-Power Supply 3-4 Preparing for Installation 3-5 Grounding the Switch 3-5 Installing the DC Power Sup.
Contents vi Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 Cable and Adapter Specificatio ns B-5 10-Gigabit Ethernet X2 Transceiver Mod ule Cable Specifications B-5 SFP Modu .
vii Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Preface Audience This guide is for the netwo rking or computer tech nician responsible for installing Catalyst 3750-E and Catalyst 3560-E switches. W e assume that you are familiar with the concepts and terminology of Ethernet and local area networking.
viii Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Preface Caution Means re a de r b e ca re f ul . In this situation, you might do something that could result in equipment damage or loss of dat a. War nin g This warning symbol means dan ger .
ix Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Preface These compatability matrix document s are av ailable from this Cisco.com site: http://www .cisco.com/en/ US/products/hw/modules/p s5455/products_de vice_support_tables_list.
x Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Preface.
CH A P T E R 1-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 1 Product Overview The Catalyst 3 750-E and Catalyst 3560-E f amily of switches, also referred to a.
1-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description Front Panel Description The 24- and 48-port switch front panel.
1-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Front Panel Description Figur e 1 -1 24- and 48-P ort Switc h Front P anel 158104 3 2.
1-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description Figur e 1 -3 Catalyst 3 560E-12SD Switc h F ront P anel 202514 1 2 3 1 Mode bu tton and switch LEDs 2 SFP module slots 1.
1-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Front Panel Description 10-Gigabit Ethernet Module Slots The switch 10-Gigabit Ethernet module slots are used for uplin k connection to other switches and routers.
1-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description LEDs Y ou can use the switch LEDs to monitor swit ch acti vity and its performance. Figure 1-4 and Figure 1-5 sho w the switch LEDs and the Mode b utton th at you use to select one of the port modes.
1-7 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Front Panel Description Figur e 1 -5 Catalyst 3560E-12D and 3 560E-12SD S witch LEDs .
1-8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description RPS LED The RPS LED sho ws the RPS 2300 status. Ta b l e 1-4 lists the LED colors and their meanings. (Only 24- and 48-port switches.
1-9 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Front Panel Description Fan LED The Fan LED sho ws the fan status. Ta b l e 1-7 lists the LED colors and their meanings. (Only Catalyst 3560E-12D and 3560E-12SD switches.
1-10 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description Ta b l e 1-9 lists the LED colors in dif ferent modes and their meanings.
1-11 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Front Panel Description PoE LED If the PoE LED mode is not selected on a switch wi th PoE ports, the PoE LED still sho ws detected PoE problems.
1-12 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Front Panel Description Stack LED On Catalyst 3750-E switches, the stack LED sho ws the sequence of member switch es in a stack. Up to nine switches can be members of a stack.
1-13 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Rear Panel Description Rear Panel Description The 24- and 48-port switch r ear panel.
1-14 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Rear Panel Desc ription Figur e 1 -8 Catalyst 3560E-12 D S witch Rear Panel Input OK .
1-15 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Rear Panel Description Y ou can order t hese Stack W ise cables fr om your Cisco sales representat iv e: • CAB-ST A CK-50CM= (0.
1-16 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Rear Panel Desc ription The power -supply modules have tw o status LEDs.
1-17 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Rear Panel Description The power -supply modules have tw o status LEDs.
1-18 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Rear Panel Desc ription RPS Connector The 24- and 48-port switches are support ed b y the Cisco RPS 2300 (model PWR-RPS2300=).
1-19 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 1 Product Overview Management Options Ta b l e 1-15 lists the Ethernet management port LED col ors and their meanings.
1-20 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 1 Produ ct Overview Management Options • SNMP network m anagement Y ou can mana ge switches from a Simple Network Mana gement Protocol (SNMP)-comp atible management station that is runni ng platforms such as HP OpenV iew or SunNet Manager .
CH A P T E R 2-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 2 Switch Installation This chapter describes ho w to install a Catalyst 3750-E or a Cataly st 3560-E switch and mak e connections to the switch.
2-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Preparing for Installation War nin g T o prevent the switch from overh eating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 113°F (45°C).
2-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Preparing for Installation War nin g Before performing any of the following procedu res, ensure that power is removed from the DC circuit.
2-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Preparing for Installation War nin g Ultimate disposal of this product should be handled according to all nat ional laws and regulations.
2-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Preparing for Installation Installation Guidelines Before installing the switch, v eri fy that these gui delines are met: • Clearance to front and rear panels is suc h that – Front-panel indicators can be easily read.
2-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Planning a Switch Stack (Catalyst 3 750-E Switches) Planning a Switch Stack (Cataly.
2-7 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Planning a Switch Stack (C atalyst 3750-E Switches) Stack Cabling Configurations This section describes the recommend ed cabling conf igurations for stacking the switches.
2-8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Planning a Switch Stack (Catalyst 3 750-E Switches) Figure 2-3 and Figure 2-4 are e xam ples of recommended conf igurat ions w hen the switches are rack- or wall-mounted side-b y-side.
2-9 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Planning a Switch Stack (C atalyst 3750-E Switches) Figur e 2-7 Example of a Stack.
2-10 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing the Switch Installing the Switch This section describes these inst alla.
2-11 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing the Switch Installing the switch in ot her rack types requires an option al bracket kit no t included with the switch. Figure 2-9 sho ws the standard 19-inch brackets and optio nal mounting brack ets and part numbers.
2-12 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing the Switch Attaching the Rack -Mount Brackets T o install t he switch in a rack, you must f irst remove th e screws fr om the switch chassis so that the mounting brackets can be attached.
2-13 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing the Switch Use four Phillips flat-head screws to attach the long side of the brackets to t he switch for the front- or rear-moun ting positions ( Figure 2-11 ).
2-14 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing the Switch Mounting the Switch in a Rack After the brackets are att ached to the switch, use the four supplied Phillips machine scre ws to attach the brackets to the rack ( Figure 2-1 2 ).
2-15 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing the Switch Wall-Mounting T o install Cat alyst 3560E-12D and 3560E-SD .
2-16 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing the Switch Mounting the Catalyst 35 60E-12D Switch on a Wall For Catalyst 3560E-1 2D switches, mount the switch with the left-side panel facing up , as shown in Figure 2-14 .
2-17 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing the Switch Mounting the Catalyst 3560 E-12SD Switch on a Wall For Catalyst 356 0E-SD switches, mount the switch wit h the r ear panel facing up , as shown in Figure 2-15 .
2-18 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing the Switch Table- or Shelf-Mounting T o install the swit ch on a table or shelf, locate the adhesi ve strip with the rub ber feet in the moun ting-kit en velope.
2-19 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Connecting to the StackWise Ports (Catalyst 3750-E Switches) Connecting to the St.
2-20 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing Devices in the 10 -G igabit Ethernet Slots Installing Devic es in the 1.
2-21 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing Devices in the 10-G igabit Ethernet Slots For Catalyst 3560E-1 2SD switches, position the module f ace up to install in the upper modu le slot (slot 1).
2-22 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing Devices in the 10 -G igabit Ethernet Slots Caution Do not install th e con verter module with SFP mo dules or cables connected.
2-23 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing SFP Modules Removing an X2 Transceiver Module or Converter Module T o .
2-24 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Installing SFP Modules Installing an SFP Module When installing SFP modules, ob se.
2-25 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Installing SFP Modules Figur e 2-22 Conv erter Module with SFP Modules In stalled.
2-26 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Connecting Devices to the Ethernet Ports Figur e 2-24 Installing an SFP M odule in.
2-27 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports 10/100/1000 Ethernet Port Connections The 10/100/1000 Et hernet ports use standard RJ-45 connectors with Ethernet pin outs.
2-28 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Connecting Devices to the Ethernet Ports Note On 48-port PoE switch es, you must use the 1150-W po wer-supply mo dule to pro vide full 15.
2-29 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 2 Switch Installation Where to Go Next Where to Go Next If the default configurati on is satisfactory , the switch does not need further conf iguration.
2-30 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 2 Switch Installatio n Where to Go Ne xt.
CH A P T E R 3-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 3 Power Supply and Fan Module Installation This chapter describes how to remov e and install a ne w or replacement po wer supply or fa n module in a Catalyst 3750-E or Catalyst 3560-E switch.
3-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installation Overview • Remov e power from the po wer-supply mod ule before removin g or installing the mod ule.
3-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 3 Power Supply and Fan Module Installation Installing an AC-Power Supply Installing an AC-Power Supply T o remov e and install an A C-po wered power -supply module, follo w these steps: Step 1 T urn off the po wer at its source.
3-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installing a DC-Power Supply For Catalyst 356 0E-12D and 3560E- 12SD switches, align the capti ve scre w with the scre w hole.
3-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 3 Power Supply and Fan Module Installation Installing a DC-Power Supply War nin g This product relies on the building’ s installation for short-circuit (overcurrent) protection.
3-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installing a DC-Power Supply Follo w these steps to instal l either a single-groun d lug or a dual- ground lug on th e switch.
3-7 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 3 Power Supply and Fan Module Installation Installing a DC-Power Supply Figur e 3-6 Attac hing the Groun.
3-8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installing a DC-Power Supply Installing the DC Powe r Supply in the Switch T o remov e and install a DC-po wered power -supply module, follow these st eps: Step 1 T urn off po wer at the DC circuits.
3-9 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 3 Power Supply and Fan Module Installation Installing a DC-Power Supply Wiring the DC-Input Power Source T o wire the DC-po wer-supply module to a DC-input power source, follow these steps.
3-10 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installing a Fan Module Step 5 Replace the terminal block plastic safety cover . Fo r 24- and 48-port sw itches , torque the safety-co ver scre w to 10 lbf-in.
3-11 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 3 Power Supply and Fan Module Installation Installing a Fan Module Figur e 3-13 Inserting the F an Modu.
3-12 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 3 Power Sup ply and Fan Module Installation Installing a Fan Module.
CH A P T E R 4-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 4 Troubleshooting This chapter describes these Catalyst 375 0-E and Catalyst 3560-E swit ch trouble.
4-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 4 Tro ubleshooting Diagnosing Prob lems Check Switch LEDs If you hav e physica l access to the switch, look at the port LEDs for troubl eshooting informa t ion about the switch .
4-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 4 Troubleshooting Diagnosing Problems • V erify that both d evices hav e power . • V erify that you are using the c orrect cable t ype. See Appendix B, “Con nector and Cable Specif ications” for more information.
4-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 4 Tro ubleshooting Diagnosing Prob lems port. Use th e sho w interfaces pri vileged EXEC command to check the port or interface error -disabled, disabled, or shutdo wn status on both sides of the connection.
4-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 4 Troubleshooting How to Clear the Switch IP Address and Configuration • If a remote de vice does not autonegotiate, con figur e the duple x settings on the tw o ports to match.
4-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 4 Tro ubleshooting Finding the Swit ch Serial Number Finding the Switch Serial Number If you contact Cisco T echnical Assistance, you need to kno w the serial number of your switch.
4-7 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Gui de OL-9774-03 Chapter 4 Troubleshooting How to Replace a Failed Stack M ember 5.
4-8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Chapter 4 Tro ubleshooting How to Replace a Failed Stack Member.
A-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 APPENDIX A Technical Specifications This appendix lists the Catalyst 3750 - E and Cata lyst 3560-E switch tech nical specifications. Ta b l e A-1 shows the switch en vironmenta l and physical specifications.
A-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix A Tec hnical Specifications Ta b l e A-2 shows the po wer specifications fo r A C-powered 24- and 48-port switches.
A-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix A Technical Specifications Ta b l e A-4 shows the po wer specifications for DC-powered 24- and 48-port switches.
A-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix A Tec hnical Specifications.
B-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 APPENDIX B Connector and Cab le Specifications This appendix describes the cables and adap ters that you use to connect the Catalyst 3750-E and Catalyst 35 60-E switches to other devices.
B-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix B Connec tor and Cable Specifications Connector Specifications 10/100/1000 Ports The 10/100/1000 Ethernet port s on switches use standard RJ-45 connectors and Ethernet pinouts.
B-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix B Connector and Cable Specifications Connector Specifications SFP Modules Figure B-4 , Figure B-5 , and Fi gure B-6 show the SFP modul e connectors. The Catalyst 3560-E switch supports the S FP module patch cable, a 0.
B-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix B Connec tor and Cable Specifications Connector Specifications Figur e B-7 SFP Module P atch Cable (Only .
B-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Cable and Adapter Specifications T.
B-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix B Connec tor and Cable Specifications Cable and Adapter Spec ifications Ta b l e B-2 lists the transcei ver optical transmit and recei ve specif ications.
B-7 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Four Twisted-Pair Cable Pinouts Figure B-9 and Figure B-10 sho w the schematics of four twisted-pair cables.
B-8 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix B Connec tor and Cable Specifications Cable and Adapter Spec ifications Figur e B-1 0 Four T wist ed-Pair.
B-9 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Identifying a Crossover Cable T o identify a crosso ver cable, compare the two modular ends of the cable.
B-10 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix B Connec tor and Cable Specifications Cable and Adapter Spec ifications Ta b l e B-5 lists the pinouts for the console port, RJ-45-to-DB-25 female DTE adapter , and the console device.
C-1 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a CLI-based setup procedure for a Catalyst 3750-E and Catalyst 3560-E standalone switch or a switch stack.
C-2 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Informatio.
C-3 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information.
C-4 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information Step 7 Enter the interface name (physical interface or VLAN name) of the interface that connects to the management network, and press Re turn .
C-5 Catalyst 3750-E and Catalyst 3560-E Sw itch Hardware Installation Guide OL-9774-03 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information Step 10 These choices appear: [0] Go to the IOS command prompt without saving this config.
C-6 Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide OL-9774-03 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Informatio.
IN-1 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 INDEX Numerics 10/100/1000 p orts cable lengths 1-4, 2-27 connecting to 2-27 described 1-4 numbering 1-3 pinouts B-2 recom.
Index IN-2 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 Class 1 laser warning 2-3 CLI 1-19 accessing by using Express Setup C-1 accessing through console port C-1 code comp.
Index IN-3 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 SFP modules 2-23 to 2-26 site requ irements 2-5 starting the terminal emu lation software C-2 table or shelf-mount i.
Index IN-4 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 port connections 2-27 ports described 1-4 power plannin g tool 2-28 shock hazard warning 2-4, 2-28 troubleshooting 4.
Index IN-5 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 speed default setting 2-27 troubleshooting 4-4 stacking equipment warning 2-2 stacking powering co nsiderations 2-9 .
Index IN-6 Catalyst 3750-E and 3560-E Switch Hardware Installation Guide OL-9774-03 X X2 transceiver modu les described 1-5 installati on 2-20 removing 2-23 See also 10-Gigabit Ethernet modu le slot.
An important point after buying a device Cisco Systems 3750-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 3750-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 3750-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 3750-E you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 3750-E will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 3750-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 3750-E.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 3750-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 3750-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
