Instruction/ maintenance manual of the product 186 Cisco Systems
Go to page of 218
Corporate He adquarters Cisco System s, Inc . 170 West Ta sman Drive San Jos e, CA 95134 -1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco A T A 1 86 and .
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 CONTENTS Preface xi Overvi ew xi Audienc e xi Organi zation xii Conv enti ons xii Relat ed Do .
Cont ent s iv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Instal ling the Cis co ATA 2-1 Network Re quiremen ts 2-2 Safety Reco mmendation s 2.
Content s v Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Establ ishing Auth enticat ion 4-2 Setti ng the Cod ec 4-3 Config urin g Refresh I nte.
Cont ent s vi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Param eters for C onfig uratio n Me thod 5-4 UseTFTP 5-4 TftpU RL 5-5 CfgInt erval 5.
Content s vii Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 LBRCodec 5-20 AudioMode 5-20 RxCodec 5-21 TxCo dec 5-2 2 NumTxFra mes 5-2 2 CallFe a.
Cont ent s viii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Call Co mmands 6-1 Call Comma nd Struct ure 6-1 Syntax 6-2 Context -Id entifi ers .
Content s ix Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Runn ing the Ex ecu table Fi le 8-3 Upgrade Requ irements 8-3 Syntax 8-3 Upgrade Proc.
Cont ent s x Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Calli ng Line Id enti fication Pr esent ation A-6 About Cal ling Li ne Identi ficati .
xi Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Preface This pre face inc ludes the foll ow ing secti ons: • Overview , page xi • Audi ence.
xii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Preface Organizati on Organization Ta b l e 1 provid es an overview of the organization of this guide.
xiii Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Pre face Convent ions • T ermi nal sessions and info rmation the system displays ar e in screen fo nt. Note Means r e ader t ake note . Notes contain helpf ul suggestions or reference s to material not co vered in the publica tion.
xiv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Preface Related Documenta tion Related Documentation • RFC3261 ( SIP: Sessi on Initiatio n Pr o tocol ) • RFC2543 ( SIP: Sessi on Initiatio n Pr o tocol ) • Cisco A T A SIP Compliance Refer ence Information http://www- vnt.
xv Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Pre face Obtaining Documentation • Read Me F irst - AT A Boot Lo ad Infor mation • Cisco A .
xvi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Preface Obtain ing Technical Assista nce Y ou can subm it your co mments by mail by using the .
xvii Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Pre face Obtainin g Techni cal Assistan ce • Priority le vel 1 (P1)—Y our prod uction net work is down, and a critic al impact to business ope rations will occur if servic e is n ot res tored quickly .
xviii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Preface Obtain ing Technical Assista nce.
C HAPTER 1-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 1 Cisco Analog Telephone Adaptor Overview This secti on describe s the hardwar e and software features of the Cisco Analo g T eleph one Adap tor (Cisco A T A) and includes a brief o ver vie w of the Session Initiation Protoco l (SIP).
1-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Sessio n Init iation Pr otocol (SIP) O verv.
1-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Session Initiation Protocol (SIP) Overview SIP Capabilities SIP provides th e follo wing capabilities: • Determi nes the a v aila bility of the tar get e ndpoint.
1-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Sessio n Init iation Pr otocol (SIP) O verview Figur e 1 -4 SIP Arc hitec tur e SIP Cl ien ts SIP clients include: • Gate ways—Pr ovid e call control.
1-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Hard ware Overv iew Hardware Overview The C isco A T A 186 and Cisc o A T A 188 a re com pact, ea sy to in stall devices.
1-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Hardwa re Overview The unit provides t he fol lowing conne ctors and ind icators : • 5V po we r connec tor .
1-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features Note If the func tion button blinks sl o wly , the Cisco A T A ca nnot find t he DHCP s erver .
1-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures Additional Su pported Sign aling Protocols In addit ion to SI P , the Cisco A T A sup ports the f ollowing signal ing pro tocols: • H.
1-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features • SIP proxy server red.
1-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Installa tion and Con figuration O verview.
C HAPTER 2-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 2 Installing the Cisco ATA This secti on provides instruc tions for instal ling the Cisco A T A 186 and Cisco A T A 188.
2-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 2 Insta lling the Cisco ATA Netwo rk Requiremen ts Network Requi rements The Cisc o A T A acts as an endpoint on an IP teleph ony network.
2-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 2 Insta lling the Cisco ATA What Y ou Need • Re gulato ry Complian ce and Safety In .
2-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 2 Insta lling the Cisco ATA Installa tion Proced ure Figur e 2-1 Cisco A T A 186 Rear P anel Connections Figur e 2-2 Cisco A T A 188 Rear P a nel Connectio ns Proc edure Step 1 Place the Ci sco A T A near an electr ical po wer outlet .
2-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 2 Insta lling the Cisco ATA Install atio n Procedu re If you ar e connec ting a t elep.
2-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 2 Insta lling the Cisco ATA Power-D own Procedu re Power-Down Procedure Cautio n If you need t o power down Cisco A T A 186 or Cisc o 188 a t any time , use t he foll o wing po wer-down procedu re to prev ent d amage to the unit.
C HAPTER 3-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 3 Configuring the Cisco ATA for SIP This section describ es how to conf igure the Cisco A T A to operate with the Session Initiation Protocol (SIP) signal ing image and ho w the Cisco A T A obtains the latest signaling imag e.
3-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Defaul t Boot Load B ehavior • Cisco A T A W.
3-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion 4.
3-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Specifyin g a Preconfig ured VLAN ID or Disabl.
3-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Steps Nee ded to C onfigur e the Cis co ATA Note If you ar e using the voic e configur ation menu t o set the par amete rs, you must co n vert hexade cimal values to decima l v alues .
3-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Steps Nee ded to Configur e the Cisco ATA Basi.
3-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Configur ing the C isco ATA Using a TFT P Server.
3-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Configur ing the Cisco ATA Using a TFTP Ser ve.
3-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Configur ing the C isco ATA Using a TFT P Server The settings in this e xample indic ate that a group of Cisco A T As is using the TFTP serv er with an IP address of 10 .
3-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Configur ing the Cisco ATA Using a TFTP Ser ver – input-t ext-f ile is the i nput te xt f ile r epresentation of the Cisco A T A conf igurati on f ile.
3-11 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Configur ing the C isco ATA Using a TFT P Serve.
3-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Configur ing the Cisco ATA Using a TFTP Ser v.
3-13 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Configur ing the C isco ATA Using a TFT P Serve.
3-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Configur ing the Cisco ATA Using a TFTP Ser ver This com pletes the pa ramete r settings and DHCP opti ons you need to configure for this procedu re.
3-15 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Voice C onfigu ration Me nu Without Using a DHC.
3-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Voice Co nfiguration Menu Note Do no t use the voice configuration menu to a ttempt t o change a ny v alues tha t you configure d by means of the TFTP co nfiguration file method.
3-17 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Voice C onfigu ration Me nu Step 4 Foll o w the vo ice prompt s and enter the ap propriat e v alues, th en press the # key .
3-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Cisco ATA We b Configuration Pa ge 5 # 8 # 7 .
3-19 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Cisco ATA Web Co nfigur ation Pa ge Note Do not use the web co nfiguration page to att empt to c hange any values that you configure d by means of the TFTP conf iguratio n file me thod.
3-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Cisco ATA We b Configuration Pa ge Figur e 3-.
3-21 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 3 Conf iguring the Cisco AT A for SIP Refreshing or Resetting the Cisco ATA Y o u can acc ess the web configurat ion page from any graphics-ca pable browser, such as Micros oft Inter net Explo rer or Nets cape.
3-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 3 Configuri ng th e Cisco AT A for SIP Upgradi ng the SIP Signaling Image Procedure .
C HAPTER 4-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 4 Basic and Additional SIP Services This section pro vides informatio n about ke y ba.
4-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Important B asic SIP Services Establishing Authent.
4-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Addi tional S IP Serv ices • LoginI D0, page 5-.
4-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Addition al SIP Services • Network Timing, page .
4-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Addi tional S IP Serv ices Comfort Noise During Silence Per iod When Using G.711 When silence suppression is turned on in ITU G.
4-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Addition al SIP Services Dial Plan Y ou can set spec ific dial pl an rules and timeou t v alues. Many of these v alues ar e determ ined on a countr y-by-country ba sis.
4-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Addi tional S IP Serv ices • T wo or more hosts are returned. Th e two hosts with the highest prioritie s are used as the primary and backu p proxy ser vers (AltGk is igno red in this case ).
4-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Addition al SIP Services Network Timing Y o u can .
4-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Addi tional S IP Serv ices Receiver-tag ged VIA header Y ou can disab le or ena ble the proc essin g the r ecei ved = paramete r in the V ia header .
4-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Addition al SIP Services SIP Proxy Server Re dund.
4-11 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Addi tional S IP Serv ices T o for ward ca lls t.
4-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Complete Refe rence Table of all Cisco AT A SIP Services Placing an IP Call T o place an IP call, dia l the tele phone numbe r and the IP ad dress of the rem ote user agen t.
4-13 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Compl ete Re ference Ta ble of all Cisco ATA SIP.
4-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Complete Refe rence Table of all Cisco AT A SIP S.
4-15 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 4 Bas ic and Additional SIP Services Compl ete Re ference Ta ble of all Cisco ATA SIP.
4-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 4 Basic and Additional SIP Services Complete Refe rence Table of all Cisco AT A SIP S.
C HAPTER 5-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 5 Parameters and Defaults This se ction provides informat ion on the para meters and d efaults t hat you can use to cr eate yo ur own Cisco A T A c onfiguration file.
5-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Configur ation T ext File Templ ate Note This sec tion cont ains r ecomme nded v alue s for t he Unite d State s and Swe den as conf igur ation e xamp les for cert ain param eters.
5-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Use r I nte rfa ce (UI) Pa ram ete r RingOnOffTime:2,4,25 D.
5-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Configurati on Parame ter Default 0 Voice Configuration Menu Access Code 7387277 Configuration Paramet er This parameter is located in the light- yello w portion of the Cisco A T A W eb Configurati on Page.
5-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Parameters for Configuration Method Valu e Type Bool ean Ra.
5-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Network Para meters Y o u can set Cfg Interval to a random value to achieve random conta ct intervals from the Cisco A T A to the TFTP serv er .
5-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Network Param eters • StaticRout e, page 5-7 • StaticNe.
5-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Account Information Param eters Default 0.
5-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Ac cou nt In fo rma tio n Par am ete rs UID0 Description This para mete r is the User ID for the Phone 1 port.
5-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Account Information Param eters Default 0 Voice Configuration Menu Access Code 13 PWD1 Description This para meter is the password for the Phone 2 port .
5-11 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Ac cou nt In fo rma tio n Par am ete rs Range Maximu m number of charac ters: 31 Default 0—Disab les proxy regi stration and proxy-r outed call s.
5-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Account Information Param eters LoginID 0 Description This para meter is th e Login ID for line 0. Note UID0 is us ed for auth entication if UseLogi nID is 0.
5-13 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Backup S erver Param eters Backup Serv er Parameters This .
5-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s SIP Parame ters Voice Configuration Menu Access Code 251 GkTimeToLiv e Description Not applica ble to SIP .
5-15 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults SIP Para meters Default 0 Voice Configuration Menu Access .
5-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s SIP Parame ters SIPRegOn Description 0—Di sa ble S IP r e gist rat ion.
5-17 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults SIP Para meters SIPPort Description This par ameter is u sed to conf igure the p ort throug h which t he Cisco A T A listens for inc oming SIP requests and send s outgoing SIP reques ts.
5-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s SIP Parame ters If the outgoin g SIP request has a R OUTE head er , the f irst rout e in the header is remov ed if it resolv es to the same IP ad dress as the out- bound-pr oxy .
5-19 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers NatTimer Description This par ameter al lows you to specify a retransmis sion inte rv al for s ending a dum my packet to N atServer .
5-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters LBRCodec Description This para meter allo ws you to spe cifi y which lo w-bit-r ate codecs are av aila ble.
5-21 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers RxCodec Description Use this pa rame ter to specif y recei v ing-audi o codec pr eferen ce.
5-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters TxCodec Description Use this parameter to specify the transmitting-au dio codec prefer ence.
5-23 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers CallFea tures Description Disable/e nable CallFea tures b y setting eac h corre sponding bit to 0 or 1 .
5-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Pai dFea tures Description Unsubs cribe/ subscrib e to CallFeatu res by s etting each co rrespond ing bit to eit her 0 or 1.
5-25 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers CallerIdMethod Description This 32-bi t para meter spec ifies the signal fo rmat to use for both FXS por ts for gene rating C aller ID format.
5-26 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Default 0x00019e 60 Voice Configuration Menu Access Code 316 FeatureTimer Description This para meter provid es configurabl e timing values for various fea tures, as shown below .
5-27 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers Default 0x0000000 0 Voice Configura.
5-28 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters ConnectM ode Description This pa ramet er is a 32-bit bitm ap used to contro l the c onnect ion mo de of the sele cted call sign aling protocol .
5-29 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers Note Y ou c annot sim ultaneously se t bits 20 and 21 t o 1.
5-30 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters AutMethod Description This para met er is no t use d for SIP .
5-31 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers AltNTPIP Description This pa ramete r is the alterna te NTP I P addre ss, if y ou want redu ndancy .
5-32 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Voice Configuration Menu Access Code 917 UDPTOS Description This p arameter spec ifie s the I P precedenc e (T oS bit) of UD P packet s.
5-33 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers T able 5-5 SigTimer P ar amet er Bit Definitions Bit Number Definition 0-7 Call waiting period—T he peri od betwe en each burst of c all-waitin g tone.
5-34 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Operating Parame ters OpFlags Description This para meter ena bles/disa bles various opera tional feat ures.
5-35 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers VLANSetting Description This pa ramet er is for firmware version 2. 15 and 2.14ms, and ab ove.
5-36 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers • DialPlan , page 5-38 .
5-37 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Note Bit 8 is not used at this time.
5-38 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers IPDialPlan Description This Ipa rameter al lo ws for detec tion of IP-lik e des tination addre ss in DialPlan .
5-39 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Additional DialPlan Informa .
5-40 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers Dial P lan Example 1 (D efault D ial Plan) The fol lo win g dial pl an: *St4-|#St4-|911|1>#t8.
5-41 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Dial Plan Blocking (I n Rule.
5-42 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers 'P' Rule t o Support Dial Prefix This rule is for automatic pre-pending the dial string as entered b y the user with a specif ied pref ix.
5-43 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Note Only positive v alues ca n be configured to the Ci sco A T A 186. For negativ e values, u se the 16 -bit 2’ s-compleme nt value.
5-44 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers Recommended Values The foll.
5-45 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers • on-time —0 • of f-ti.
5-46 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers • of f-time —2000 • t.
5-47 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers • of f-time —2400 • to.
5-48 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers Range Maxim um of 2 48 ch a.
C HAPTER 6-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 6 Call Commands This section pro vides detaile d information on call commands for the.
6-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Syntax Syntax The CallCmd string has the follo wing structu re: Context- Identif ier Command .
6-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 6 Call Commands Synt ax Context-Identifiers T able 6-1 Context -Identifiers Identifier.
6-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Syntax Input Sequence Identifiers Action Identifiers T able 6-2 Input.
6-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 6 Call Commands Call C ommand Ex ample Call Command Example In additi on to call comm ands that you configure, the Ci sco A T A has a default list of ca ll comma nds to handl e comm on cal l scenar ios.
6-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Call Command Example Configuring hook-flash (at any time); Release-th.
6-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 6 Call Commands Call Comma nd Behavior Call Command Behavior Ta b l e 6 - 4 summarize s diff ering Cal l Command behavior ba sed on the U.
6-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Call Command Behavio r DIALIN G: Us er is e ntering phone number , which is parsed with the gi ve n dial -pla n rul es • R—Ab ort dia ling, re start di al ton e, and rev ert t o PREDIA L stat e.
6-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 6 Call Commands Call Comma nd Behavior RINGING: C isco A T A is rin ging the phone to aler t user of an incoming cal l • OFH—Stop ringing, answer t he call, a nd go t o CONNECTED state.
6-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Call Command Behavio r 3W A YCALLING: Cisco A T A is conne cted to t.
6-11 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 6 Call Commands Call Comma nd Behavior CALLING_HO LDING: Cisco A T A is waiting for a se cond far end to respond while placing a c onnected call on hold • R—Cancel the call and rev ert to PREDIAL_H OLDING state.
6-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 6 Call Comman ds Call Command Behavio r.
C HAPTER 7-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 7 Configuring and Debug ging Fax Services The Cisco A T A provi des two modes of fax services t hat are capa ble of intern etworking w ith Cisco IOS ga te wa ys o v er I P netw or ks.
7-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note Th e Cisco A T A can a lso acce pt stand ard-ba sed prot ocol-level code c switch request s, but canno t send such re quests.
7-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de ConnectMode Description The Connec tMode param eter is a 3 2-bit v alue.
7-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note For detaile d informat ion on settin g up yo ur IOS gate ways and on fea ture a v ailability , refer to the documen t Cisco F ax Se rvices o ver IP .
7-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de Dial-Peer Lev.
7-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Usin g FAX Mode Using FAX Mode Use fax mode when the gate w ays in the network do not support fax pass-through mode or dial -pe er configurat ion.
7-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Configuring th e Cisco ATA fo r Fax Mode on a Per-C all Basis Note The per-call-basis fax mode featu re is only av ailable for t he H.
7-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices T able 7 -1 Solving Comm on F ax Pr oblems Problem Action The far-en d gateway is not lo aded with cor rect soft ware im age.
7-9 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Servic.
7-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax S.
7-11 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Servi.
7-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices If the nu meric co des for the G.
7-13 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services – <cap_file> is the N AI Snif fer capt ure file .
7-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Input file: faxpassthru.cap <00.723>: (G723) 2.
7-15 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services • --------- --- Sum mary ---- ------- --- Input file: faxp assthr u.
7-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax S.
7-17 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services [ 136]<3.200=>2.53> Codec G711u/D [ 137]<3.
7-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices [ 37]<2.53=>3.200> Codec G723 [ 39]<3.
7-19 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 7 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Example 7 -9 F ax P ass-thr ough Mo de F ailur e ---------- FAX Summary 1 ---------- [ 37]<2.
7-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapt er 7 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices • rtpca tch can h andle a maximum of 2 0 prserv ports u sing the -port option .
C HAPTER 8-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 8 Upgrading the Cisc o ATA Signaling Image This se ction de scribes two methods for u.
8-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapte r 8 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually • image_i d is a uni que 32-bit in teger that dif fers wit h each upgrad e.
8-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 8 Upg rading the Cisco ATA Signaling Image Upgradi ng the Sign alin g Image Manu ally .
8-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapte r 8 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually Definitions • -any —Allow upgrad e regardless of soft ware and build versions (re commend ed).
8-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 8 Upg rading the Cisco ATA Signaling Image Conf irmi ng a Su cces sful Sig nalin g Im .
8-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapte r 8 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Ima.
C HAPTER 9-1 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 9 Troubleshooting This se ction de scribes troubleshoot ing pr ocedures f or the Cisc.
9-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 9 Trouble shoot ing Symptoms and Actions Symptoms an d Actions Sympto m Pa rameters with va lues set by using the web ser ver int erface o r voic e conf iguration me nu re vert to their original settings.
9-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 9 Troubleshoot ing Installat ion and Up grade Is sues Possible Cause Recipi ent has not registered the IP phone. Recommended Ac tion Regist er the IP phon e.
9-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 9 Trouble shoot ing Debuggi ng Sympto m V oice pr ompt ret urns Up grade failed messa ge. This can onl y occur if you are using th e ex ecuta ble-f ile u pgrade met hod.
9-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Admi nistrator ’s Guide (SIP) OL-3410-01 Chapter 9 Troubleshoot ing Frequent ly Asked Questi ons where port is the port nu mber yo u have selected . If you do n ot ent er port .log , deb ug inf ormation stil l appears on your screen, but it is not sav ed to a log fi le.
9-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Chapter 9 Trouble shoot ing Cont act ing TA C 5. Is v oice quality sat isfactory? If you a nswer no to any of th e above questio ns, you m ay have a loop i mpedance great er than 40 0 ohm.
A- 1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapt or Administra tor’s Guide (SIP) OL-3410-01 APPEND IX A Using SIP Supplementary Services SIP suppl ement ary ser vices are se rvices that you ca n use to enha nce you r telepho ne servic e. These service s incl ude cal l forw ard, ca ll ret urn, call forw arding and con ference callin g.
A- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix A Using SIP Supplemen tary Services Common Sup plementar y Services This section con.
A-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix A Using SIP Supplem entary Servi ces Common Su ppleme ntary Servi ces Unattended Tra.
A- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix A Using SIP Supplemen tary Services Common Sup plementar y Services Attended Tra nsf.
A-5 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix A Using SIP Supplem entary Servi ces Common Su ppleme ntary Servi ces Step 5 T o confer ence wit h both caller s at the sam e time , pe rform a hook flas h, then pres s 3 on the te lephon e keypad.
A- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix A Using SIP Supplemen tary Services Common Sup plementar y Services Forw ard On No A nswer Press #75 on yo ur telepho ne keypad; enter the number you wan t to forward the c alls to; the n press # again.
A-7 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix A Using SIP Supplem entary Servi ces Common Su ppleme ntary Servi ces Calling Line Identification Restriction in the United States Press *67 on yo ur tele phone keypad to ac tiv ate CLI R.
A- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix A Using SIP Supplemen tary Services Common Sup plementar y Services.
B-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapt or Administra tor’s Guide (SIP) OL-3410-01 APPEND IX B Voice Menu Codes This sec tion conta ins a quic k-refere nce list of the voice co nfiguration men u options f or the Cisc o A T A.
B-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendi x B Voice Menu Code s Ta b l e B - 2 lists conf iguration code s.
B-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix B Voice Menu Codes Rx cod ec 3 6 Select s the audi o codec type to use to decode recei v ed data.
B-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendi x B Voice Menu Code s Ta b l e B - 3 lists codes use d in t he softwa re upgra de proc ess. For i nformat ion abou t thes e code s, see Appendix , “Upgrad ing the Cisco A T A Signa ling Imag e.
C-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapt or Administra tor’s Guide (SIP) OL-3410-01 APPEND IX C Cisco ATA Specifications This section desc ribes Cisco A T A specifications: • Phy.
C-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendi x C Cisco ATA Sp ecif ication s Electrical Specification s Electrical Specificat ions .
C-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix C Cisco ATA Specificatio ns Physical Interfaces Physical Interfaces Ringing Chara cteristics Software Specifications T able C-4 Ph ysical Inter f aces Description Specification Ethern et T wo RJ-4 5 connect ors, IEEE 802.
C-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendi x C Cisco ATA Sp ecif ication s Softw ar e Spe cific ation s Fax G.711 fax pass-t hrough and G.711 fax mode. Enhanc ed fax p ass-thro ugh is su pporte d on th e Cisco A T A.
C-5 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Append ix C Cisco ATA Specificatio ns SIP Compliance Reference Information SIP Compliance Ref .
C-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendi x C Cisco ATA Sp ecif ication s SIP Compl iance Refe rence In formation.
D- 1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapt or Administra tor’s Guide (SIP) OL-3410-01 APPEND IX D SIP Cal l Flows This section describes some bas ic call flo ws for the Cisco A T A:.
D- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls Call Flow Scena rios f.
D-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls Cisco ATA-to-SIP Server—Registration with Authentication Figure D-2 illustrates the Cisco A T A re gistering wi th the SIP server .
D- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls Figur e D-2 Cisco A T .
D-5 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls T able D-4 Log Listin gs 1. REGISTER sip:192.168.2.81 SIP/2.0 Via: SIP/2.0/UDP 192.
D- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls Cisco ATA-to-Cisco ATA— Basic SIP to SIP Call without A uthentication Figure D-3 illustrates a call f rom one Cisco A T A to another .
D-7 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls T able D-5 Action Des cr.
D- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls T able D-6 Log Listin gs 1. INVITE sip:9000@192.168.2.97;user=phone SIP/2.
D-9 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls 4. SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.2.97:5060;branch=140fed6e-f61cbd1a-52f223b1-9beb149a-1 Via: SIP/2.
D-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls 8. SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.3.175 Record-Route: <sip:9000@192.
D-11 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls 13. BYE sip:9000@192.168.2.194;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.
D-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls Cisco ATA-to-Cisco ATA— Basic SIP to SIP Call with Authentication Figure D-4 illustrates a ca ll from one Cisco A T A to another .
D-13 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls T able D-7 Action Des c.
D-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls T able D-8 Log Listin gs 1. INVITE sip:9000@192.168.2.81;user=phone SIP/2.
D-15 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls 5. INVITE sip:9000@192.168.2.81;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.
D-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls 8. SIP/2.0 100 Trying Via: SIP/2.0/UDP 192.168.2.81:5060;branch=c0b3510a-819f9d1a-ea43c345-9604747f-1 Via: SIP/2.
D-17 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 Appendix D SIP Call Flows Call Fl ow Scena rios for Success ful Calls 12. SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.3.175 Record-Route: <sip:9000@192.
D-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 Appendix D SI P Call Flo ws Call Flow Scena rios for Succes sful Calls 17. BYE sip:9000@192.168.2.194;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.
GL-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 GLOSSAR Y Numerics 10Ba seT 10-M bps baseb and Ethe rnet s pecification using t wo pairs o f twisted -pair cabling (Categor ies 3, 4, or 5): one pair for transmitt ing data a nd the other fo r receiving data.
Glos sary GL-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 compr ession Th e ru nning of a data se t throug h an a lgorithm that r educes t he space required to store or th e bandwi dth requir ed to transmit the data set.
Glossary GL-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 FXO Foreign Ex change Of fice. An FXO int erface conne cts to the pub lic switche d telephon e network (PSTN) centr al of f ice and is the interf ace of fered on a stan dard telephone.
Glos sary GL-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 IP Intern et Protocol . Network layer pr otocol in the T CP/IP stack o ffering a con nectionle ss intern etwork service.
Glossary GL-5 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 P POTS Plain old telepho ne service . Basic telephon e service sup plying stan dard single-li ne telephon es, telephone lines, and a ccess to the PST N.
Glos sary GL-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01 SIP Session Initia tion Protocol. Protocol dev eloped b y the IETF MMUSIC W o rking Group as an alterna tiv e to H.32 3. SIP fea tures ar e compli ant with IETF RFC 254 3, publis hed in Ma rch 1999 .
Glossary GL-7 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) OL-3410-01 voice pa cket gateway Gateway platfor ms that enable Intern et tele phony service provider s to offer res idential and b usiness-c lass services for Internet telephony .
Glos sary GL-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S IP) OL-3410-01.
IN-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) 78-3410-01 INDEX Numerics 486 Busy Here response- timeout con figura tion 5-26 802.
Index IN-2 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide (S IP) 78-3410-01 in United State s A-7 call-pr ogres s tone pa rameter s 5-42, 5-44 Call -p rog ress to.
Inde x IN-3 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) 78-3410-01 GkId 5-14 GkOrProxy 4-2, 4- 10, 5-10 GkTime ToLive 5-14 IPDi alPla n 5-38 LBRCod ec 5-.
Index IN-4 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide (S IP) 78-3410-01 DHCP disabling 5-7 enab ling 5-7 DHCP di scover y mes sage 5-34 DHCP opt ion 12 5-35 D.
Inde x IN-5 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) 78-3410-01 fax mode c onfiguration se ttings 5-23 fax-mod e config uration sett ings 5-24 fax pass-thr ough 5-28 G.
Index IN-6 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide (S IP) 78-3410-01 maximu m number of digit s in phone num ber 5-25 maximu m number of ti mes to try redi.
Inde x IN-7 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) 78-3410-01 PWD1 parameter 5- 10 R recei ved= tag in VIA head er 5-29 receivi ng-audio c odec sett.
Index IN-8 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide (S IP) 78-3410-01 servers 1-4 SIP call return configurat ion setting 5-29 SIP mode confi gurati on param.
Inde x IN-9 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapt or Administra tor’s Guide (SI P) 78-3410-01 uncondi tional c all forwa rding 4-10 unique c onfigurat ion file 3-9, 3-12 upgradi ng.
Index IN- 10 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide (S IP) 78-3410-01.
An important point after buying a device Cisco Systems 186 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 186 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 186 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 186 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 186 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 186, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 186.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 186. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 186 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center