Instruction/ maintenance manual of the product 700 Series Cisco
Go to page of 8
Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 1 999. Cisco Systems, Inc. All rights reserved. Cisco 700 Series Router Cabling and Setup Quick Start Guide This document describes the basic process of cabling and conf iguring the Internet access de vice, the Cisco 700 series router.
2 78-10157-01 Verify the PC Setup Before you begin, v erify that each computer that will be connected to the computer has a network interface card (NIC) installed and TCP/IP loaded.
3 78-10157-01 Connect a 770 Series Router to a PC or Hub Step 1 If you are connecting to a computer , connect a yellow Ethernet cable from a yello w Ethernet port on the rear panel of the router to the Ethernet port on the network interface card on the computer .
4 78-10157-01 Connect the ISDN Line This section sho ws how to connect the router to the ISDN. Connect a Cisco 762 or Cisco 776 Router to the ISDN Line Step 1 Connect the red ISDN U cable to the red port labeled ISDN U on the rear panel of your router .
5 78-10157-01 Step 2 Connect the other end of the ISDN S/T cable to the ISDN wall socket. Note If necessary , use the enclosed RJ-45-to-RJ-11 adapter to connect to an RJ-11 ISDN wall jack. Connect the Power and Turn On the Router This section describes the procedure for supplying power to the router .
6 78-10157-01 Setup the Router to Access a Corporate Network or Internet Service Provider A Cisco Fast Step CD-R OM and a R VS-COM Lite CD-R OM is included with your router . W e recommend that you use Cisco Fast Step software to set up the router and R VS-COM Lite software f or Common ISDN Application Programmers Interface (CAPI) support.
7 78-10157-01.
8 78-10157-01 Access Registrar, AccessPath, Any to Any, AtmDirector, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo, Cisco Certified Internetwork Expert logo, CiscoLink , the Cisco M.
An important point after buying a device Cisco 700 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco 700 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco 700 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco 700 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco 700 Series will certainly help you make a decision on the purchase.
If you already are a holder of Cisco 700 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco 700 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco 700 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco 700 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
