Instruction/ maintenance manual of the product 3.00.01 Cino
Go to page of 235
1 Programming Reference International Edition, Rev . 2.2 Beta Release.
Revision Sheet Progr amming Reference VERSAJET F i r m w a r e Ve r s i o n Command 3.00.01 3.00.02 FS 2 Define user-defined Kanji characters Can only be used in Japanese 2-byte fonts Add T raditional.
Propriet ary S t atement Progr amming Reference VERSAJET The information contained herein is propriet ary and is provi ded sorely for the purpose of allowing customers to operate and maintain the equipment described herein. PC W orth Int’l Co., Ltd.
Progr amming Reference VERSAJET T able of Contents Chapter 1 Introduction .................................................................................................. 1 JCL Comm and Se ts .........................................................
ESC ! ......................................................................................................................... ....................... 36 Progr amming Reference VERSAJET ESC $ ..........................................................
FS !.......................................................................................................................... ......................... 70 Progr amming Reference VERSAJET FS & ......................................................
GS c .......................................................................................................................... ..................... 156 Progr amming Reference VERSAJET GS f ............................................................
US 4 ........................................................................................................................ ....................... 204 Progr amming Reference VERSAJET US 7 ............................................................
Introduction Progr amming Reference VERSAJET Thank you for choosing Cino V ersaJet Mobile Printer . The V ersaJet mobile prin ter is designed with rugged yet lightweight architecture, deliveri ng the ultimate convenience of mobilit y to meet your on-demand labels and receipts printing requirement s.
JCL Command Sets Progr amming Reference VERSAJET ESC/POS (Epson S tandard Code for Point of Sales) is one of the most world-popular command set s, which was designed to provide the expandability and universal applicability demanded by t he market.
Commands Comparison between JCL and ESC/POS Progr amming Reference VERSAJET ESC / POS Emulation Command Descriptions HT Horizontal t ab LF Print and line feed FF Print and return to standard mode (in .
Progr amming Reference VERSAJET Command Descriptions ESC ? Cancel user-defined characters ESC @ Initialize printer ESC { T urn upside-down printing mode on/off ESC D Set horizontal t ab positions ESC .
Progr amming Reference VERSAJET Command Descriptions FS ! Set print mode(s) for Kanji characters FS & Select Kanji character mode FS - Turn underline mode on/off for Kanji character FS 2 Define us.
Progr amming Reference VERSAJET Command Descriptions GS Set relative vertical print position in page mode GS ^ Execute macro GS H Select printing position of Human Reada ble Interpretation (HRI) char.
Progr amming Reference VERSAJET JCL Feature Command Sets Command Descriptions GS C 0 Select counter print mode GS C 1 Select counter mode GS C 2 Sets the serial number counter value GS c Print counter.
Progr amming Reference VERSAJET Command Descriptions RS n Print *.bmp image RS p Set number of copies of printing data RS q Serialization setting RS r Print serialization RS t Define flash macro RS u .
Progr amming Reference VERSAJET Command Descriptions US L Feed key control US M Panel buttons control US a Get RS232 configurations US c Get Bluetooth configurations US g Get printer configurations US.
Command Overview Progr amming Reference VERSAJET This chapter covers following topics to present the supported commands that are used with V ersaJet: Command Notation Explanations of T erms .
Command Notation Progr amming Reference VERSAJET [Name] The name of the command. [Format] The code sequence. [Range] Gives the allowable ranges for the arguments. [Default] Gives the default values, if any , for the command p arameters. [Description] Describes the command’ s function.
Explanation of T erms Progr amming Reference VERSAJET (1) Receive buffer The receive buffer is a buffer that stores, as is, t he data received from the host (the reception data). The reception data is stored in the receive buffer te mporarily, and is then processed sequentially.
Progr amming Reference VERSAJET (5) Printable area The maximum range within which printing is possible un der the printer specifications. The printable area for this printer is as follows: The length of the horizontal direction in standard mode: approximately 48 mm {1.
Progr amming Reference VERSAJET (9) LSB Least Significant Bit (11) Base line Standard position when character data is stored in the print buffer. Normal character in standard mode and page mode: A y * Base line * When font A (12×24 dots) is selected, this height is for 24 dots.
Supported Commands Progr amming Reference VERSAJET In these tables, click any name to see the command descr iption. Please refer following instructions before you utilize these commands to configure your V ersaJet: St andard mode : Enabled. ( ) : Enabled only when the command is used at the beginning of command codes.
Commands Listed by F unction Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode Print LF Print and line feed Executing Pr.
Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode Character ESC M Select character font Setting Character ESC R Select a.
Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode Bit Image ESC * Select bit-image mode Executing Bit Image GS * Define .
Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode Kanji FS S Set left- and right-side Kanji character spacing Setting Ka.
Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode Set configuration US A RS232 Setting Setting Set configuration US C Bl.
Progr amming Reference VERSAJET Function Ty p e Command Name Command Descriptions Classification St andard Mode Page Mode A ction Command RS A Label lengt h measurement Executing A ction Comma.
Commands Listed in Alphanumeric Order Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode HT Print Position Horizontal tab Executi.
Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode ESC { Character Turn up side-down printing mode on/of f Setting ( ) ES.
Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode FS - Kanji Turn underline mode on/of f for Kanji characters Setting FS.
Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode GS H Bar Code Select printing position of Human Readable Interpretation (HRI) .
Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode RS J A ction Rewind command (back feed) Executing RS L A ction Print s.
Progr amming Reference VERSAJET Command Name Function Ty p e Command Descriptions Classification St andard Mode Page Mode US A Set Configuration RS232 setting Setting US C Set Configuration Bl.
Command Descriptions Progr amming Reference VERSAJET This section contains the command codes for the V ersaJ et which allows you to co nfigure your printer for particular application to match your specific requirements. Each command begins on a sep arate page with its own heading to help you find the key information about each command.
HT Progr amming Reference VERSAJET [Name] Horizontal tab [Format] ASCII HT Hex 09 Decimal 9 [Range] None [Default] None [Description] Moves the printing pos ition to the next horizontal tab. [Notes] This command is ignored unless the next horizontal tab position has been set.
LF Progr amming Reference VERSAJET [Name] Print and line feed [Format] ASCII LF Hex 0A Decimal 10 [Range] None [Default] None [Description] Prints the data in the print buf fer and feed one line [Notes] The amount of paper feed per line is based on the value set using the line spacing command ( ESC 2 or ESC 3 ).
FF (in p age mode) Progr amming Reference VERSAJET [Name] Print and return to standard mode [Format] ASCII FF Hex 0C Decimal 12 [Range] None [Default] None [Description] In page mode, prints the dat a in the prin ter buffer collectively and returns to st andard mode.
CR Progr amming Reference VERSAJET [Name] Printing and carriage return [Format] ASCII CR Hex 0D Decimal 13 [Range] None [Default] None [Description] Executes printing and one line feed as LF . [Notes] After printing, the printing position mo ves to the beginning of the line.
CAN Progr amming Reference VERSAJET [Name] Cancel printing data in p age mode [Format] ASCII CAN Hex 18 Decimal 24 [Range] None [Default] None [Description] In page mode, deletes all the print data for the current printing area. [Notes] This command is only enabled in page mode.
ESC FF Progr amming Reference VERSAJET [Name] Print data in p age mode [Format] ASCII ESC FF Hex 1B 0C Decimal 27 12 [Range] None [Default] None [Description] In page mode, prints all buf fe red data in the printable area collectively . [Notes] This command is enabled only in page mode.
ESC SP Progr amming Reference VERSAJET [Name] Set right-side character spacing [Format] ASCII ESC SP n Hex 1B 20 n Decimal 27 32 n [Range] 0 ≦ n ≦ 255 [Default] n = 0 [Description] Sets the right-side character spacing to n x (horizont al or vertical motion unit).
ESC ! Progr amming Reference VERSAJET [Name] Select print mode(s) [Format] ASCII ESC ! n Hex 1B 21 n Decimal 27 33 n [Range] 0 ≦ n 255 ≦ [Default] n = 0 [Description] Selects print mode(s) using n as follows: Bit Off/On Hex Decimal Function Off 00 0 Character font A (12 × 24).
ESC $ Progr amming Reference VERSAJET [Name] Set absolute print position [Format] ASCII ESC $ nL nH Hex 1B 24 nL nH Decimal 27 36 nL nH [Range] 0 ≦ nL 255, 0 ≦≦ nH 255 ≦ [Default] None [Description] Sets the print st arting position to ( nL + nH x256) x (horiz ontal or vert ical motion unit) from the beginning of the line.
ESC % Progr amming Reference VERSAJET [Name] Select/cancel user-defined character set [Format] ASCII ESC % n Hex 1B 25 n Decimal 27 37 n [Range] 0 ≦ n ≦ 255 [Default] n = 0 [Description] Selects or cancels user-defined character set. When the LSB of n is 0, the user-defined character set is canceled.
ESC & Progr amming Reference VERSAJET [Name] Define user-defined characters [Format] ASCII ESC & y c1 c2 [ x1 d1 d ( y x x1 )] [ xk d1 d ( y x xk )] Hex 1B 26 y c1 c2 [ x1 d1 d ( y x x1 )] [ x.
When the value of y , c1 , c2 , or x is out of the range, this command is canceled, and the following data is processed as normal dat a. Progr amming Reference VERSAJET This command can define user-defined characters for each font independently .
ESC * Progr amming Reference VERSAJET [Name] Select bit-image mode [Format] ASCII ESC * m nL nH d1dk Hex 1B 2A m nL nH d1 dk Decimal 27 42 m nL nH d1 dk [Range] m = 0, 1, 32, 33 0 ≦ nL ≦ 255 0 ≦.
Progr amming Reference VERSAJET [Notes] Data ( d ) specifies a bit printed to 1 and not printed to 0. If the bit image data exceeds the number of dot s to be printed on a line, the excess data is ignored.
ESC - Progr amming Reference VERSAJET [Name] T urn underline mode on/off [Format] ASCII ESC - n Hex 1B 2D n Decimal 27 45 n [Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 [Default] n = 0 [Description] T urns .
ESC 2 Progr amming Reference VERSAJET [Name] Select default line spacing [Format] ASCII ESC 2 Hex 1B 32 Decimal 27 50 [Range] None [Default] None [Description] Sets the line spacing to the “default line sp acing”. [Notes] The line sp acing can be independently in standard and p age mode.
ESC 3 Progr amming Reference VERSAJET [Name] Set line spacing [Format] ASCII ESC 3 n Hex 1B 33 n Decimal 27 51 n [Range] 30 ≦ n ≦ 255 [Default] Amount of line spacing which corresponds to “default line sp acing” (See ESC 2 for the line spacing).
ESC ? Progr amming Reference VERSAJET [Name] Cancel user-defined characters [Format] ASCII ESC ? n Hex 1B 3F n Decimal 27 63 n [Range] 32 ≦ n ≦ 126 [Default] None [Description] Cancels the user-defined char acters defined for the character code n .
ESC @ Progr amming Reference VERSAJET [Name] Initialize printer [Format] ASCII ESC @ Hex 1B 40 Decimal 27 64 [Range] None [Default] None [Description] The data in the print buffer is cleared, and the printer mode(s) is reset to the mode that was in effect when the power was turned on.
ESC { Progr amming Reference VERSAJET [Name] T urn upside-down printing mode on/ff [Format] ASCII ESC { n Hex 1B 7B n Decimal 27 123 n [Range] 0 ≦ n 255 ≦ [Default] n = 0 [Description] In standard mode, turns upside-down printing mode on/of f When the LSB of n is 0, upside-down mode is turned of f.
ESC D Progr amming Reference VERSAJET [Name] Set horizontal t ab positions [Format] ASCII ESC D n …nk NUL Hex 1B 44 n1…nk 0 Decimal 27 68 n1…nk 0 [Range] 1 ≦ n 255 ≦ 0 ≦ k 32 ≦ [D efault.
Progr amming Reference VERSAJET When [ n ] is less than or equal to the preceding value [ n ] k -1, horizontal t ab setting is finished, and the following data is processed as normal dat a.
ESC E Progr amming Reference VERSAJET [Name] T urn emphasized mode on/ff [Format] ASCII ESC E n Hex 1B 45 n Decimal 27 69 n [Range] 0 ≦ n 255 ≦ [Default] n = 0 [Description] T urns emphasized mode on/ff When the LSB of n is 0, emphasized mode is turned off.
ESC G Progr amming Reference VERSAJET [Name] T urn double-strike mode on/ff [Format] ASCII ESC G n Hex 1B 47 n Decimal 27 71 n [Range] 0 ≦ n 255 ≦ [Default] n = 0 [Description] T urns double-strike mode on/off [Notes] When the LSB of n is 0, double-strike mode is turned off.
ESC J Progr amming Reference VERSAJET [Name] Print and feed paper [Format] ASCII ESC J n Hex 1B 4A n Decimal 27 74 n [Range] 0 ≦ n ≦ 255 [Default] None [Description] Prints the data in the print buf fer and feeds the paper n x (vertical or horizont al motion unit).
Progr amming Reference VERSAJET When this command is processed in page mode, only the printing position moves, and the printer does not perform actual printing. This command is used to temporarily feed a specific length without changing the line spacing set by other commands.
ESC L Progr amming Reference VERSAJET [Name] Select page mode [Format] ASCII ESC L Hex 1B 4C Decimal 27 76 [Range] None [Default] None [Description] Switches from standard mode to page mode. [Notes] This command is only enabled when processed at the beginning of the line in standard mode.
Progr amming Reference VERSAJET S tandard mode is selected as the default. In page mode, the printer print s the data in th e print buffer for the printing area specified by ESC W collectively by FF or ESC FF .
ESC M Progr amming Reference VERSAJET [Name] Select character font [Format] ASCII ESC M n Hex 1B 4D n Decimal 27 77 n [Range] 0, 1, 48, 49 [Default] n = 0 [Description] Selects a character font, using.
ESC R Progr amming Reference VERSAJET [Name] Select an international character set [Format] ASCII ESC R n Hex 1B 52 n Decimal 27 82 n [Range] 0 ≦ n 10 ≦ [Default] n = 0 [Description] Select an international character set n as follows: ASCII code Hex 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E n Country Dec 35 36 64 91 92 93 94 96 123 124 125 126 0 U.
ESC S Progr amming Reference VERSAJET [Name] Select standard mode [Format] ASCII ESC S Hex 1B 53 Decimal 27 83 [Range] None [Default] None [Description] Switches from page mode to st andard mode. [Notes] This command is only enabled in page mode. Page mode can be selected by ESC L .
ESC T Progr amming Reference VERSAJET A → D ↓ p r i n t i n g a r e a ↑ B ← C [Name] Select print direction in page mode [Format] ASCII ESC T n Hex 1B 54 n Decimal 27 84 n [Range] 0 ≤ n ≤ .
Progr amming Reference VERSAJET This command setting has no effect in st andard mode. If this command is processed in standard mode, an internal flag is activated, and this flag is enabled when the printer selects p age mode.
ESC V Progr amming Reference VERSAJET [Name] T urn 90° clockwise rotation mode on/off [Format] ASCII ESC V n Hex 1B 56 n Decimal 27 86 n [Range] n = 0, 1, 48, 49 [Default] n = 0 [Description] In stan.
ESC W Progr amming Reference VERSAJET [Name] Set printable area in p age mode [Format] ASCII ESC W xL xH yL yH dxL dxH dyL dyH Hex 1B 57 xL xH yL yH dxL dxH dyL dyH Decimal 27 87 xL xH yL yH dxL dxH d.
Progr amming Reference VERSAJET If [horizontal logical origin + printing area wid th] exceeds the print able area, the printing area width is automatically set to [horizont al printable area – horizont al logical origin].
Progr amming Reference VERSAJET paper ………………………….xLxH , yL yH page mode range ………………………… dxLdxH dyLdyH 65.
ESC Progr amming Reference VERSAJET [Name] Set relative print position [Format] ASCII ESC nL nH Hex 1B 5C nL nH Decimal 27 92 nL nH [Range] 0 ≦ nL 255, 0 ≦≦ nH 255 ≦ [Description] Moves the print starting position to ( nL + nH x256) x (horizontal or vertical motion unit) from the current position.
ESC a Progr amming Reference VERSAJET [Name] Select justification [Format] ASCII ESC a n Hex 1B 61 n Decimal 27 97 n [Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 [Default] n = 0 [Description] In standard mo.
ESC d Progr amming Reference VERSAJET [Name] Print and feed n lines [Format] ASCII ESC d n Hex 1B 64 n Decimal 27 100 n [Range] 0 ≦ n ≦ 255 [Default] None [Description] Prints the data in the print buf fer and feeds n lines. [Notes] The amount paper fed per line is based on th e value set using the line sp acing command ( ESC 2 or ESC 3 ).
ESC t Progr amming Reference VERSAJET [Name] Select character code table [Format] ASCII ESC t n Hex 1B 74 n Decimal 27 1 16 n [Range] 0 ≤ n ≤ 5, n =16 [Default] n = 0 [Description] Select a page n from the character code table as follows: n Character Code T able 0 PC437(U.
FS ! Progr amming Reference VERSAJET [Name] Select print mode(s) for Kanji characters [Format] ASCII FS ! n Hex 1C 21 n Decimal 28 33 n [Range] 0 ≦ n 255 ≦ [Description] Set the print mode(double-.
Progr amming Reference VERSAJET [Notes] When both double-height and double-width modes are selected (including right- and left-side character spacing), quadruple size characters are printed.
FS & Progr amming Reference VERSAJET [Name] Select Kanji character mode [Format] ASCII FS & Hex 1C 26 Decimal 28 38 [Description] Selects Kanji character mode. [Notes] Kanji codes are processed in order of the first byte and the second byte.
FS - Progr amming Reference VERSAJET [Name] T urn underline mode on/off for Kanji characters [Format] ASCII FS - n Hex 1C 2D n Decimal 28 45 n [Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 [Default] n = 0 [D.
FS 2 Progr amming Reference VERSAJET [Name] Define user-defined Kanji characters [Format] ASCII FS 2 c1 c2 d1...dk Hex 1C 32 c1 c2 d1...dk Decimal 28 50 c1 c2 d1.
FS S Progr amming Reference VERSAJET [Name] Set left- and right-side Kanji character sp acing [Format] ASCII FS S n1 n2 Hex 1C 53 n1 n2 Decimal 28 83 n1 n2 [Range] 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 [Default] n1 = 0, n2 = 0 [Description] Sets left- and right-side Kanji characters sp acing n1 and n2 .
Progr amming Reference VERSAJET In page mode, the horizont al or vertical moti on unit differs in p age mode, depending on starting position of the print able area as follows: When the starting position is set to the upper le ft or lower right of the printable area using ESC T , the horizontal motion unit (x) is used.
FS W Progr amming Reference VERSAJET [Name] T urn quadruple-size mode on/off for Kanji characters [Format] ASCII FS W n Hex 1C 57 n Decimal 28 87 n [Range] 0 ≤ n ≤ 255 [Default] n = 0 [Description] T urn quadruple-size mode on or off for Kanji characters.
FS p Progr amming Reference VERSAJET [Name] Read the image file from flash memory [Format] ASCII FS p n m Hex 1C 70 n m Decimal 28 1 12 n m [Range] 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51 [Description] Prints a NV bit image n using the mode specified by m .
FS q Progr amming Reference VERSAJET [Name] Define image, write to flash memory [Format] ASCII FS q n [ xL xH yL yH d1 dk ] 1 [ xL xH yL yH d1 dk ] n Hex 1C 71 n [ xL xH yL yH d1 dk ] 1 [ xL xH yL yH .
Progr amming Reference VERSAJET [Notes] NV bit image means a bit image which is defined in a non-volatile memory . The NV bit image defined is effective until t he next NV bit image is defined. In standard mode, this command is ef fective only when processed at the beginning of the line.
Progr amming Reference VERSAJET Data is written to the non-volatile memory by this command. Note the following when using this command. The printer is BUSY when writing the data to the non-volatile memory . In this case, be sure not to transmit data from the host because the printer does not receive dat a.
GS ! Progr amming Reference VERSAJET [Name] Select character size [Format] ASCII GS ! n Hex 1D 21 n Decimal 29 33 n [Range] 0 ≦ n 7, 16 ≦≦ n 23, 32 ≦≦ n 39, 48 ≦≦ n 55, 64 ≦≦ n 71, 8.
Progr amming Reference VERSAJET Character height selection Bit 2 Bit 1 Bit 0 Hex Decimal Height Off Off Of f 00 0 1(normal) Off Off On 01 1 2(double-height) Off On Off 02 2 3 Off On On 03 3 4 On Off O.
Progr amming Reference VERSAJET In page mode, double-height and double-wid th are on the character orientation. The setting of the character size of alph anum eric and Katakana is ef fective until ESC ! or ESC @ is executed, the printer is reset, or the power is turned off.
GS $ Progr amming Reference VERSAJET [Name] Set absolute vertical print position in page mode [Format] ASCII GS $ nL nH Hex 1D 24 nL nH Decimal 29 36 nL nH [Range] 0 ≦ nL 255 , ≦ 0 ≦ nH 255 ≦ .
GS ( K Progr amming Reference VERSAJET [Name] Select printing control [Description] Selects printing control as follows: Function is specified by the function code fn . fn Function 49 Function 49 Selects printing density pL and pH specify parameter number af ter fn to ( pL + pH x 256) bytes.
GS ( K <Function 49> Progr amming Reference VERSAJET [Name] Selects printing density [Format] ASCII GS ( K pL pH fn m Hex 1D 28 4B 02 00 31 m Decimal 29 40 75 2 0 49 m [Range] ( pL + pH x 256) = 2 ( pL = 2, pH = 0 ) fn = 49, 0 ≤ m ≤ 15 [Default] m = 8 [Description] Selects printing control mode by m .
GS ( k Progr amming Reference VERSAJET [Name] S pecify and print the symbol [Format] ASCII GS ( k Hex 1D 28 6B Decimal 29 40 107 [Description] Processes the data concerning two-di mensional code. (PDF417, QR Code, MaxiCode). Symbol type is specified by cn ; Function is specified by fn .
Progr amming Reference VERSAJET cn fn Function 65 Function 765 Datamatrix: S pecify the number of columns 66 Function 766 Datamatrix: S pecify the number of rows 67 Function 767 Datamatrix: S pecify t.
Progr amming Reference VERSAJET [Notes] The function is specified with the function code ( fn ). Details of the performance dif fer according to the function. For processing of PDF417 symbol dat a (w hen cn = 48) The symbol data specified by Function 080 d1 .
Progr amming Reference VERSAJET For process of QR Code symbol (when cn = 49) The symbol data specified by Function 080 d1 ... dk is stored in the printer and is printed by the specification of Function 081. The symbo l data in the save area is reserved until the following processing is performed: Function 080 or 180 or 980 is executed.
GS ( k PDF417<Function 065> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 41 n Decimal 29 40 107 3 00 48 65 n [Range] ( pL + pH x 256) = 3 ( pL =3, pH =0) cn = 48, fn = 65 0 ≤ n ≤ 30 [Default] n = 0 [Description] S pecifies the number of co lumns of the data area of PDF417.
GS ( k PDF417<Function 066> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 42 n Decimal 29 40 107 03 00 48 66 n [Range] ( pL + pH x 256) = 3 ( pL =3, pH =0) cn = 48, fn = 66 n = 0, 3 ≤ n ≤ 90 [Default] n = 0 [Description] S pecifies the number of rows of the data area of PDF417.
GS ( k PDF417<Function 067> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 43 n Decimal 29 40 107 03 00 48 67 n [Range] ( pL + pH x 256) = 3 ( pL =3 , pH =0 ) cn = 48 , fn = 67 1 ≤ n ≤ 5 [Default] n = 2 [Description] S pecifies the width of a module of PDF417 symbol.
GS ( k PDF417<Function 068> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 30 44 n Decimal 29 40 107 03 00 48 68 n [Range] ( pL + pH x256) = 3 ( pL =3, pH =0) cn = 48, fn = 68, 5 ≤ n ≤ 100 [Default] n = 5 [Description] Specifies the height of a module of PDF417 symbol.
GS ( k PDF417<Function 069> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m n Hex 1D 28 6B 04 00 30 45 m n Decimal 29 40 107 04 00 48 69 m n [Range] ( pL + pH x 256) = 4 ( pL.
Progr amming Reference VERSAJET The error correction code word calculated by modulus 929. Settings of this function are effective until ESC @ is ex ecuted, the printer is reset, or the power is turned off.
GS ( k PDF417<Function 080> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1 dk Hex 1D 28 6B pL pH 30 50 30 d1 dk Decimal 29 40 107 pL pH 48 80 48 d1 dk [Range] 4 ≤ ( pL .
GS ( k PDF417<Function 081> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 30 51 m Decimal 29 40 107 03 00 48 81 m [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 48, fn = 81 m = 48 [Description] Encodes and prints the PDF417 symbol data in the symbol save area.
Progr amming Reference VERSAJET The data area includes the following code words. Data specified by Function 080. The descriptor of symbol length (the fi rst code word in the dat a area). The error correction code word calculated by modulus 929.
GS ( k QR Code<Function 165> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n1 n2 Hex 1D 28 6B 04 00 31 41 n1 n2 Decimal 29 40 107 04 00 49 65 n1 n2 [Range] ( pL + pH x256) = 4 ( pL = 4, pH = 0) cn = 49, fn = 65 n1 = 49, 50, 51 n2 = 0 [Default] n1 = 50, n2 = 0 [Description] S pecifies the model of QR Code.
GS ( k QR Code <Function 167> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 31 43 n Decimal 29 40 107 03 00 49 67 n [Range] ( pL + pH X 256) = 3 ( pL = 3, pH = 0) cn = 49, fn = 67 2 ≤ n ≤ 5 [Default] n = 2 [Description] S pecifies the size of a module of QR Code symbol.
GS ( k QR Code <Function 169> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 31 45 n Decimal 29 40 107 03 00 49 69 n [Range] ( pL + pH x 256) = 3 ( pL = 3, pH =0) cn = 49, fn = 69 48 ≤ n ≤ 51 [Default] n = 48 [Description] S pecifies the error correction level of QR Code.
GS ( k QR Code <Function 180> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1 dk Hex 1D 28 6B pL pH 31 50 30 d1 dk Decimal 29 40 107 pL pH 49 80 48 d1 dk [Range] 4 ≤ ( p.
Progr amming Reference VERSAJET Settings of this function are effective unt il the following processing is performed: Function 080 or 180 is executed.
GS ( k QR Code <Function 181> Progr amming Reference VERSAJET [Format] ASCII GS ( k p pH cn fn m Hex 1D 28 6B 03 00 31 51 m Decimal 29 40 107 03 00 49 81 m [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 49, fn = 81 m = 48 [Default] None [Description] Encodes and prints the QR Code symbol data in the symbol save area.
Progr amming Reference VERSAJET The following data are added automatically by the encode processing. Position Detection Patterns Separators for Position Detection Patterns Timing Patte.
GS ( k MaxiCode<Function 265> Progr amming Reference VERSAJET [Format] ASCII GS ( k k pL pH cn fn n Hex 1D 28 6B 03 00 32 41 n Decimal 29 40 107 03 00 50 65 n [Range] ( pL + pH x 256) = 3 ( pL =.
GS ( k MaxiCode <Function 280> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1…dk Hex 1D 28 6B pL pH 32 50 30 d1…dk Decimal 29 40 107 pL pH 50 80 48 d1…dk [Range] 4 .
Progr amming Reference VERSAJET [Data Format] Item Size and T ype ANSI message header [ ]> <RS> Transportation Data Format Header 01 <GS> 96 Ship-To Postal Code 5 or 9 digits in the USA (mode2), up to 6 alphanumeric characters in other countries (mode3).
GS ( k MaxiCode <Function 281> Progr amming Reference VERSAJET [Format] ASCII GS (k pL pH cn fn m Hex 1D 28 6B 03 00 32 51 m Decimal 29 40 107 03 00 50 81 m [Range] ( pL + pH x 256) = 3 ( pL =3, pH = 0 ) cn = 50 fn = 81 m = 48 [Default] None [Description] Encodes and prints the MaxiCode symbol data in the symbol save area.
GS ( k Dat amatrix <Function 765> Progr amming Reference VERSAJET [Format] ASCII GS (k pL pH cn fn n Hex 1D 28 6B 03 00 37 41 n Decimal 29 40 107 03 00 55 65 n [Range] ( pL + pH x 256) = 3 ( pL =3, pH =0) cn = 55 fn = 65 [Default] None [Description] S pecifies the number of colu mns of the data area of Datamatrix.
GS ( k Dat amatrix <Function 766> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 37 42 n Decimal 29 40 10703 00 55 66 n [Range] ( pL + pH x 256) = 3 ( pL =3, pH =0) cn = 55 fn = 66 [Description] S pecifies the number of rows of the data area of Datamatrix.
GS ( k Dat amatrix <Function 767> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 37 43 n Decimal 29 40 107 03 00 55 67 n [Range] ( pL + pH x 256) = 3 ( pL =3, pH =0) cn = 55 fn = 67 1 ≤ n ≤ 5 [Default] n = 1 [Description] Specifies the width of a module of Datamatrix symbol.
GS ( k Dat amatrix <Function 768> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 37 44 n Decimal 29 40 107 03 00 55 68 n [Range] ( pL + pH x 256) = 3 ( pL.
GS ( k Dat amatrix <Function 769> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 37 45 n Decimal 29 40 107 04 00 55 69 n [Range] ( pL + pH x 256) = 3 ( pL =4, pH =0) cn = 55 fn = 69 1 ≤ n ≤ 6 [Default] n = 6 [Description] Specifies the Data mode of Datamatrix.
Progr amming Reference VERSAJET Barcode type: Rectangle Shape Cap acity Row Column number alphanumeric bytes 8 12 10 6 3 8 32 20 13 8 12 26 32 22 14 12 36 44 31 20 16 36 64 46 30 16 48 98 72 47 11 7.
GS ( k Dat amatrix <Function 780> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1…dk Hex 1D 28 6B pL pH 37 50 30 d1…dk Decimal 29 40 107 pL pH 55 80 48 d1…dk [Range].
GS ( k Dat amatrix <Function 781> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 37 51 m Decimal 29 40 107 03 00 55 81 m [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 55 fn = 81 m = 48 [Description] Encodes and prints the Datama trix symbol dat a in the symbol save area.
Progr amming Reference VERSAJET The data area includes the following code words. Data specified by Function 780. The descriptor of symbol length (the first code word in the data area). The error correction code word calculated by modulus 929.
GS ( k RSS-14 <Function 865> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 04 00 38 41 n Decimal 29 40 107 03 00 56 65 n [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 56 fn = 65 49 ≤ n ≤ 54 (Hex : 31~36) [Default] n = 49 [Description] S pecify the mode of RSS-14.
GS ( k RSS-14 <Function 866> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 04 00 38 42 n Decimal 29 40 107 03 00 56 66 n [Range] ( pL + pH x 256) = 3 ( pL = 3,.
GS ( k RSS-14 <Function 867> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 04 00 38 43 n Decimal 29 40 107 03 00 56 67 n [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 56 fn = 67 1 ≤ n ≤ 255 [Default] n = 2 [Description] S pecifies the width of narrow element size of a module of RSS-14 symbol.
GS ( k RSS-14 <Function 868> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 04 00 38 44 n Decimal 29 40 107 03 00 56 68 n [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0) cn = 56 fn = 68 1 ≤ n ≤ 255 [Default] n = 2 [Description] S pecifies the Height of separator of RSS-14 symbol.
GS ( k RSS-14 <Function 880> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1…dk Hex 1D 28 6B pL pH 38 50 30 d1…dk Decimal 29 40 107 pL pH 56 80 48 d1…dk [Range] (4 .
2D Composite Component Progr amming Reference VERSAJET CC-A capacity 56 characters. CC-B capacity 338 characters. For RSS-14 and RSS LIMIT , the printer automatically adds a check character at 14th digit when print. Following table shows data type and dat a capacity for each RSS symbol.
GS ( k RSS-14 <Function 881> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 38 51 m Decimal 29 40 107 03 00 56 81 m [Range] ( pL + pH x 256) = 3 ( pL = 3, pH = 0 ) cn = 56 fn = 81 m = 48 [Default] None [Description] Encodes and prints the R SS-14 symbol data in the symbol save area.
GS ( k Code49 <Function 967> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 39 43 n Decimal 29 40 107 3 00 57 67 n [Range] ( pL + pH x256) = 3 ( pL = 3, pH = 0) cn = 57, fn = 67 1 ≤ n ≤ 255 [Default] n = 2 [Description] S pecifies the width of narrow element.
GS ( k Code49 <Function 968> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn n Hex 1D 28 6B 03 00 39 44 n Decimal 29 40 107 3 00 57 68 n [Range] ( pL + pH x 256) = 3 ( pL = 3, pH =0) cn = 57, fn = 68 1 ≤ n ≤ 255 [Default] n = 16 [Description] S pecify the height of one row .
GS ( k Code49 <Function 980> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m d1 dk Hex 1D 28 6B pL pH 39 50 30 d1 dk Decimal 29 40 107 pL pH 57 80 48 d1 dk [Range] 4 ≤ ( pL.
Progr amming Reference VERSAJET Data cap acity Characters: The characters can’t exceed 49 bytes. Following characters will spend one byte, the others will spend two bytes. V alue Character V aule Character 0 0 25 P 1 1 26 Q 2 2 27 R 3 3 28 S 4 4 29 T 5 5 30 U 6 6 31 V 7 7 32 W 8 8 33 X 9 9 34 Y 10 A 35 Z 1 1 B 36 - 12 C 37 .
Progr amming Reference VERSAJET For example: (1) “123ABC” ; 6 bytes (2) “123abc” ; 3 + 3*2 = 9 bytes Numeric The numeric can’t exceed 81 bytes. Settings of this function are effective unt il the following processing is performed.
GS ( k Code49 <Function 981> Progr amming Reference VERSAJET [Format] ASCII GS ( k pL pH cn fn m Hex 1D 28 6B 03 00 39 51 m Decimal 29 40 107 3 00 57 81 m [Description] Encodes and prints the Code49 symbol dat a in the symbol save area. There is no data (Function 980 is not processed).
GS * Progr amming Reference VERSAJET [Name] Define downloaded bit image [Format] ASCII GS * x y d1 … d(x x y x 8) Hex 1D 2A x y d1… d(x x y x 8) Decimal 29 42 x y d1… d(x x y x 8) [Range] 1 ≦ x ≦ 255 1 ≦ y 48 ≦ 0 d 255 ≦ ≦ k = x x y x 8 [Default] None [Description] Defines a downloaded bit image.
Progr amming Reference VERSAJET Once a downloaded bit image has been defined, it is maintained until another definition is made, ESC & or ESC @ is executed, the printer is reset, or the power is turned of f. A downloaded bit image and a user-defined char acter cannot be defined simultaneously .
Progr amming Reference VERSAJET GS / [Name] Print downloaded bit image [Format] ASCII GS / n Hex 1D 2F n Decimal 29 47 n [Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 [Default] n = 0 [Description] Prints a downloaded bit image using the mode specified by n .
Progr amming Reference VERSAJET If the printing area width set by GS L and GS W is less than one line in vertical, the following processing is performed only on the line in question: The printing area wid th is extended to the right up to one line in vertical.
GS : Progr amming Reference VERSAJET [Name] S tart/end macro definition [Format] ASCII GS : Hex 1D 3A Decimal 29 58 [Range] None [Default] None [Description] S tarts or ends macro definition [Notes] Macro definition starts when this command is processed during normal operation and ends when it is processed during macro definition.
Progr amming Reference VERSAJET Macro is not defined when the power is turned on. The following commands cannot be contained in a macro. Do not use these commands while the macro is being defined: FS q , GS ^ , and GS v 0 .
Progr amming Reference VERSAJET GS ^ [Name] Execute macro [Format] ASCII GS ^ r t m Hex 1D 5E r t m Decimal 29 94 r t m [Range] 1 ≦ r ≦ 255 0 ≦ t ≦ 255 m = 0, 1 [Default] None [Description] Ex.
Progr amming Reference VERSAJET Macro function is useful to print the same da ta repeatedly . T o define a macro definition, send GS : just before and af ter the data desired to be repeated. And then execute macro by using GS ^ to print the same data repeatedly .
GS B Progr amming Reference VERSAJET [Name] T urn white/black reverse printing mode on/ff [Format] ASCII GS B n Hex 1D 42 n Decimal 29 66 n [Range] 0 ≦ n 255 ≦ [Default] n = 0 [Description] T urns white/black reverse printing mode on/ff When the LSB of n is 0, white/black reverse printing mode is turned off.
GS C 0 Progr amming Reference VERSAJET [Name] Select counter print mode [Format] ASCII GS C 0 n m Hex 1D 43 30 n m Decimal 29 67 48 n m [Range] 0 ≤ n ≤ 5, 0 ≤ m ≤ 2, 48 ≤ m ≤ 50 [Default] .
Progr amming Reference VERSAJET [Notes] The serial number counter is stored in the print buffer by GS c . Settings of this command are effective until ESC @ is executed, the printer is reset, or the power is turned off.
GS C 1 Progr amming Reference VERSAJET [Name] Select counter mode [Format] ASCII GS C 1 aL aH bL bH n r Hex 1D 43 31 aL aH bL bH n r Decimal 29 67 49 aL aH bL bH n r [Range] 0 ≤ ( aL + aH x 256) ≤.
Progr amming Reference VERSAJET [Notes] In a count-up setting, when the GS c is executed, the counter value exceeds the maximum value( bL + bH x 256), rest art counting from the minimum value ( aL + aH x 256).
Progr amming Reference VERSAJET GS C 2 [Name] Select the serial number counter value [Format] ASCII GS C 2 nL nH Hex 1D 43 32 nL nH Decimal 29 67 50 nL nH [Range] 0 ≤ ( nL + nH x 256) ≤ 65535 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255) [Default] ( nL + nH x 256 ) = 1 ( nL = 1, nH = 0) [Description] Sets the serial number counter value.
GS H Progr amming Reference VERSAJET [Name] Select printing position of Hum an Readable Interpretation (HRI) characters [Format] ASCII GS H n Hex 1D 48 n Decimal 29 72 n [Range] 0 ≤ n ≤ 3, 48 ≤ .
GS I Progr amming Reference VERSAJET [Name] T ransmit print IS [Format] ASCII GS I n Hex 1D 49 n Decimal 29 73 n [Range] n = 65 [Default] None [Description] T ransmits printer information, using n as follows: n Printer ID 65 Firmware version [Notes] With a serial interface printer , be sure to use this function when the host can receive data.
Progr amming Reference VERSAJET GS L If the setting exceeds the printable area, the lef t margin is automatically set to the maximum value of the printable area.
Progr amming Reference VERSAJET Left margin setting is ef fective until ESC @ is executed, the printer is reset, or the power is turned off. Left margin position is left edge of the print able area. If left margin setting is changed, lef t edge of the printable area will move.
GS P Progr amming Reference VERSAJET [Name] Set horizontal and vertical motion unit s [Format] ASCII GS P x y Commands using y : ESC 3 , ESC J Hex 1D 50 x y Decimal 29 80 x y [Range] 0 ≤ x ≤ 255, 0 ≤ y ≤ 255 [Default] x = 203, y = 203 [Description] Sets the horizontal and vertical motion unit s to 1/ x and 1/ y inch, respectively .
Progr amming Reference VERSAJET The setting of this command is effective until ESC @ is executed, the printer is reset, or the power is turned off. The calculated result from combining this command with others is truncated to the minimum value of the mechanical pitch.
GS W Progr amming Reference VERSAJET [Name] Set printable area wid th [Format] ASCII GS W nL nH Hex 1D 57 nL nH Decimal 29 87 nL nH [Range] 0 ( ≦ nL + nH x 256) 65535 (0 ≦≦ nL 255, 0 ≦≦ nH 255) ≦ [Default] nL = 0, nH = 0 [Description] In standard mode, sets the print able area width to ( nL + nH x256) x (horizont al motion unit).
GS Progr amming Reference VERSAJET [Name] Set relative vertical print position in page mode [Format] ASCII GS nL nH Hex 1D 5C nL nH Decimal 29 92 nL nH [Range] 0 ≦ nL 255, 0 ≦≦ nH 255 ≦ [Def.
GS c Progr amming Reference VERSAJET [Name] Print counter [Format] ASCII GS c In count-down mode, the counter value is updated as [counter value – increase and decrease value].
Progr amming Reference VERSAJET The counter mode (count-up, count-down, count-stop) and details of counter (maximum value, minimum value, stepping amount of incrementing or decrementing of a counter value, the repetition number of printing) are set by GS C 1 .
GS f Progr amming Reference VERSAJET [Name] Select font for HRI characters [Format] ASCII GS f n Hex 1D 66 n Decimal 29 102 n [Range] n = 0, 1, 48, 49 [Default] n = 0 [Description] Select s a font for.
GS h Progr amming Reference VERSAJET [Name] Set bar code height [Format] ASCII GS h n Hex 1D 68 n Decimal 29 104 n [Range] 1 ≤ n ≤ 255 [Default] n = 162 [Description] Sets the height of a bar code. n specifies number of dots in the vertical direction of a bar code.
GS k Progr amming Reference VERSAJET [Name] Print bar code [Format] I. ASCII GS k m d1… dk NULL Hex 1D 6B m d1… dk NULL Decimal 29 107 m d1… dk NULL II. ASCII GS k m n d1… dn Hex 1D 6B m n d1… dn Decimal 29 107 m n d1… dn [Range] I. 0 ≤ m ≤ 6 ( k and d depend on the bar code system used) II.
Progr amming Reference VERSAJET m Bar code system Number of data (k, n) Number of characters Characters Character code (d) 0 UPC-A Fixed 11 ≤ k ≤ 12 0~9 48 ≤ d ≤ 57 1 UPC-E Fixed 11 ≤ k ≤ .
Progr amming Reference VERSAJET [Notes] For I and II When standard mode is selected, this command is enabled only when the printing position is at the head of a line or when no data exist s in the print buffer .
Progr amming Reference VERSAJET For UPC-A (m = 0, 65) process Modular check character is processed as follows: Automatically added when processing data is 1 1 bytes. The 12th byte data is processed as a modu lar check character when processing dat a is 12 bytes.
Progr amming Reference VERSAJET Prints a 6-column short code from 10 digit ( d2.d1 1 ) except NSC and modular check characters. Dat a of transmitted by host PC Printing dat a d2 d3 d4 d5 d6 d7 d8 .
Progr amming Reference VERSAJET For JAN8/EAN8 (m = 3, 68) process Modular check character is processed as follows: Automatically added when processing data is 7 bytes. The 8th byte data is processed as a modular check character when processing dat a is 8 bytes.
Progr amming Reference VERSAJET For ITF (Interleaved 2 of 5) (m = 5, 70) process S tart code and stop code are added automatically . Check digits are not calculated and added. For CODEBAR (NW-7) (m = 6, 71) process S tart code and stop code are not added automatically .
Progr amming Reference VERSAJET For CODE128 ( m = 73) process Make sure to specify start character . The st art character must be code set selection character (any of CODE A, CODE B, or CODE C) which selects the first code set.
Progr amming Reference VERSAJET S pecial characters are defined by combining two characters "{+ an alphanumeric character . " The ASCII character "{" is defined by transmitting "{" twice consecutively .
GS v 0 Progr amming Reference VERSAJET [Name] Print raster bit image [Format] ASCII GS v 0 n xL xH yL yH d1 dk [Description] Selects raster bit-image mode.
Progr amming Reference VERSAJET [Notes] In standard mode, this command is ef fective only when there is no data in the print buffer . This command has no effect in the print modes (emphasized, double-strike, underline, character size, or white/black reve rse printing) for raster bit image.
GS w Progr amming Reference VERSAJET [Name] Set bar code width [Default] n = 2 [Format] ASCII GS w n Hex 1D 77 n Decimal 29 1 19 n [Range] 1 ≤ n ≤ 6 [Description] Sets the horizontal size of a bar code.
RS A Progr amming Reference VERSAJET [Name] Label length measurement [Format] ASCII RS A Hex 1E 41 Decimal 30 65 [Range] None [Default] None [Description] Label Length Measurement [Notes] When processing the automatic measurement of the label length, the printer feeds the current roll paper to measure the label length .
RS B Progr amming Reference VERSAJET [Name] Restore factory default [Format] ASCII RS B Hex 1E 42 Decimal 30 66 [Range] None [Default] None [Description] Restore Factory Default. [Notes] This command will reset the setting values of commands stored in the volatile memory .
RS E Progr amming Reference VERSAJET [Name] Clear buffer [Format] ASCII RS E Hex 1E 45 Decimal 30 69 [Range] None [Default] None [Description] Clear buffer [Notes] If this command is sent while another command is processing, processing of the other command is canceled.
RS F Progr amming Reference VERSAJET [Name] Remote power off [Format] ASCII RS F Hex 1E 46 Decimal 30 70 [Range] None [Default] None [Description] Remote power off [Notes] This is a real-time command that the printer executes power off processing upon receiving it.
RS G Progr amming Reference VERSAJET [Name] Paper feed to T OF position [Format] ASCII RS G Hex 1E 47 Decimal 30 71 [Range] None [Default] None [Description] Paper feed to T OF position. [Description] Paper feed to the print position specified by the paper length measurement is executed.
RS J Progr amming Reference VERSAJET [Format] ASCII RS J n [Name] Rewind command (back feed) Hex 1E 4A n Decimal 30 74 n [Range] 10 ≤ n ≤ 100, the unit is 0.1mm. [Default] None [Description] Rewind command (back feed) [Notes] This command is used to make motor rewind.
RS L Progr amming Reference VERSAJET [Name] Print self-test [Format] ASCII RS L Hex 1E 4C Decimal 30 76 [Range] None [Default] None [Description] Executes a specified test print. [Notes] If this command is processed while a macro is being defined, the printer cancels macro definition and start s processing this comma nd.
RS a Progr amming Reference VERSAJET [Name] Bit-map text format setting [Format] ASCII RS a n1 n2 n3 n4 n5 Hex 1E 61 n1 n2 n3 n4 n5 Decimal 30 97 n1 n2 n3 n4 n5 [Range] 0 ≤ n1 ≤ 1 ; 0 ≤ n2 ≤ 2 ; 0 ≤ n3 ≤ 5 ; 0 ≤ n4 ≤ 255 ; 0 ≤ n5 ≤ 1 [Default] n1 = 0 , n2 = 0 , n3 = 0 , n4 = 0 , n5 = 0 [Description] Bit-map text format setting.
Progr amming Reference VERSAJET n4 : Character Magnification setup n5 : T urn white/black reverse printing mode on/off n5 Description 0 Disable bold 1 Enable bold 180.
RS e Progr amming Reference VERSAJET [Name] 1D bar code generic setting [Format] ASCII RS e n1 n2 n3 n4 Hex 1E 65 n1 n2 n3 n4 Decimal 30 101 n1 n2 n3 n4 [Range] 0 ≤ n1 ≤ 3 or 48 ≤ n1 ≤ 51 ; 0 .
RS i Progr amming Reference VERSAJET [Name] Draw graphics [Description] Draw graphics specified by the function code fn . fn : Graphic type fn Description 0 Line 1 Box 2 Circle [Notes] This command decides the function according to the function code ( fn ).
RS i <Function 0> Progr amming Reference VERSAJET [Name] Draw line [Format] ASCII RS i n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Hex 1E 69 n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Decimal 30 .
Progr amming Reference VERSAJET [Notes] This command can draw lines of flexib le length, thickness, and patterns. X1: x-coordinate of start position. Y1: y-coordinate of start position. X2: x-coordinate of end position. Y2: y-coordinate of end position.
RS i <Function 1> Progr amming Reference VERSAJET [Name] Draw box [Format] ASCII RS i n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Hex 1E 69 n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Decimal 30 1.
Progr amming Reference VERSAJET For box pattern, using pL and pH as the followings: For drawing box, ( x1 , y1 ) is coordinate of inner top left corner , ( x2 , y2 ) is coordinate of inner bottom right corner .
RS i <Function 2> Progr amming Reference VERSAJET [Name] Draw circle [Format] ASCII RS i n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Hex 1E 69 n1 x1L x1H y1L y1H x2L x2H y2L y2H w pL pH Decimal 3.
Progr amming Reference VERSAJET For box pattern, using pL and pH as the followings: pH =0 P L Description 0 Black frame, white background 1 White frame, black background 2 Filled with horizontal lines in the circle. 3 Filled with vertical lines in the circle.
RS m Progr amming Reference VERSAJET [Name] Save *.bmp image into flash [Format] ASCII RS m n1 d1…..dk Hex 1E 6D n1 d1…..dk Decimal 30 109 n1 d1…..dk [Range] 1 ≤ n1 ≤ 4 [Default] None [Description] (1) Save *.bmp image into flash. ( 2 ) n 1 : I D n o (3) d1….
RS n Progr amming Reference VERSAJET [Name] Print *.bmp image [Format] ASCII RS n n1 n2 Hex 1E 6E n1 n2 Decimal 30 1 10 n1 n2 [Range] 1 ≤ n1 ≤ 4 ; 0 ≤ n2 ≤ 2 or 48 ≤ n2 ≤ 50 [Default] None [Description] (1) Print *.
Progr amming Reference VERSAJET If the printing area width set by GS L and GS W is less than one line in vertical, the following processing is performed only on the line in question: The printing area width is extended to the right up to one line in vertical.
RS p Progr amming Reference VERSAJET [Name] Set number of copies of printing data [Format] ASCII RS p n Hex 1E 70 n Decimal 30 1 12 n [Range] 1 ≤ n ≤ 255 [Default] None [Description] Set number of copies of printing data. [Notes] This command can process printing data from page buf fer .
RS q Progr amming Reference VERSAJET [Name] Serialization setting [Format] ASCII RS q n1 n2 n3 n4 n5 n6 n7 d1…..dn7 Hex 1E 71 n1 n2 n3 n4 n5 n6 n7 d1….
Progr amming Reference VERSAJET [Notes] This command allows three kinds of data, numeric, alphabetic and alphanumeric to be used. For numeric data, integers 0123456789 can be used. For alphabetic data, capit al letters A to Z can be used. Lowercase letters cannot be used in a serial number .
RS r Progr amming Reference VERSAJET [Name] Print serialization [Format] ASCII RS r n1 n2 Hex 1E 72 n1 n2 Decimal 30 1 14 n1 n2 [Range] 1 ≤ n1 ≤ 8, n2 = 1, 0x41~0x49 [Default] None [Description] Print serialization.
Progr amming Reference VERSAJET [Notes] After setting the current serialization value in the print buffer as print dat a, the printer updates serialization value based on the count mode set before stored in the print buffer .
RS t Progr amming Reference VERSAJET [Name] Define flash macro [Format] ASCII RS t n d1…..dk Hex 1E 74 n d1…..dk Decimal 30 1 16 n d1…..dk [Range] 1 ≤ n ≤ 8 [Default] None [Description] Define flash macro.
Progr amming Reference VERSAJET The following commands cannot be contained in a macro. Do not use these commands while the macro is being defined: FS q , GS ^ , and GS v 0 . Excessive use of this function may destroy t he non-volatile memory .
RS u Progr amming Reference VERSAJET [Name] Execute macro [Format] ASCII RS t n1 r t m Hex 1E 75 n1 r t m Decimal 30 1 17 n1 r t m [Range] 1 ≤ n1 ≤ 8, 1 ≤ r ≤ 255, 0 ≤ t ≤ 255, 0 ≤ m ≤.
Progr amming Reference VERSAJET When m = 1, the printer waits for the period specified by t , blinks the LED, and then waits for the p aper feed button to be pressed. Af ter this button is pressed, the printer executes the macro once. The printer repeat s this operation r times.
US 1 Progr amming Reference VERSAJET [Name] T op of Form Control [Format] ASCII US 1 n Hex 1F 31 n Decimal 31 49 n [Range] 0 ≤ n ≤ 1 [Default] n = 1 [Description] Enable/Disable T OF when power on (page mode only) n Description 0 Disable 1 Enable [Notes] This command is ignored in line mode.
US 2 Progr amming Reference VERSAJET [Name] T op of Form Offset Setting [Format] ASCII US 2 n1 n2 Hex 1F 32 n1 n2 Decimal 31 50 n1 n2 [Range] 0 ≤ n1 ≤ 1, 0 ≤ n2 ≤ 100 (unit is 0.1 mm) [Default] n1 = 0, n2 = 0 [Description] Adjusts printing position in a selected di rection and by a specified amount from the first position.
US 3 Progr amming Reference VERSAJET [Name] Auto tear-off control [Format] ASCII US 3 n Hex 1F 33 n Decimal 31 51 n [Range] 0 ≤ n ≤ 1 [Default] n = 0 [Description] Disable/Enable the p aper-tearing position of the label under page mode by using auto tear-off setup.
US 4 Progr amming Reference VERSAJET [Name] Auto T ear-off offset setting [Format] ASCII US 4 n1 n2 Hex 1F 34 n1 n2 Decimal 31 52 n1 n2 [Range] n1 = 0, 0 ≤ n2 ≤ 100 (unit is 0.1mm) [Default] n1 = 0, n2 = 0 [Description] Auto T ear-of f offset setting.
US 7 Progr amming Reference VERSAJET [Name] Paper sensor setting [Format] ASCII US 7 n1 n2 Hex 1F 37 n1 n2 Decimal 31 55 n1 n2 [Range] 0 ≤ n1 ≤ 1, 0 ≤ n2 ≤ 1 [Default] n1 = 1, n2 = 1 [Description] Paper sensor setting.
US A Progr amming Reference VERSAJET [Name] RS232 Setting [Format] ASCII US A n1 n2 n3 n4 n5 Hex 1F 41 n1 n2 n3 n4 n5 Decimal 31 65 n1 n2 n3 n4 n5 [Range] 0 ≤ n1 ≤ 3, 0 ≤ n2 ≤ 1, 0 ≤ n3 ≤ .
Progr amming Reference VERSAJET n4 : S top bit n4 Description 0 1 bit 1 2 bit n5 : Flow control Description n5 0 R T S / CTS 1 Xon / Xof f 207.
US C Progr amming Reference VERSAJET [Name] Bluetooth setting [Format] ASCII US C n2 n3 d1 1…..d1k 00 d21…..d2k 00 Hex 1F 43 n2 n3 d1 1…..d1k 00 d21…..d2k 00 Decimal 31 67 n2 n3 d1 1…..d1k 00 d21…..d2k 00 [Range] 0 ≤ n2 ≤ 2, 0 ≤ n3 ≤ 1 1 ≤ d1k ≤ 8, 1 ≤ d2k ≤ 15 [Default] n2 = 0, n3 = 0, d1 1 ….
Progr amming Reference VERSAJET US G [Name] Buzzer control [Format] ASCII US G n Hex 1F 47 n Decimal 31 71 n [Range] 0 ≤ n ≤ 255 [Default] n = 255 [Description] T urn buzzer on/off, using n as fol.
US H Progr amming Reference VERSAJET [Name] Auto power off duration setting [Format] ASCII US H n1 n2 Hex 1F 48 n1 n2 Decimal 31 72 n1 n2 [Range] 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 [Default] n1 = 01, n2 = 04 [Description] Auto power off duration setting.
US I Progr amming Reference VERSAJET [Name] Set printing intensity (darkness) [Format] ASCII US I n Hex 1F 49 n Decimal 31 73 n [Range] 0 ≤ n ≤ 15 [Default] n = 8 [Description] Set printing intensity (darkness). [Notes] When a standard mode is selected, all the data in a line is printed in the same density .
US J Progr amming Reference VERSAJET [Name] Automatic status feedback [Format] ASCII US J n Hex 1F 4A n Decimal 31 74 n [Range] 0 ≤ n ≤ 1 [Default] n = 1 [Description] Automatic status feedback.
US K Progr amming Reference VERSAJET [Name] Default operation mode setup [Format] ASCII US K n Hex 1F 4B n Decimal 31 75 n [Range] 0 ≤ n ≤ 1 [Default] n = 1 [Description] Default Operation Mode setup.
US L Progr amming Reference VERSAJET [Name] Feed key control [Format] ASCII US L n Hex 1F 4C n Decimal 31 76 n [Range] 0 ≤ n ≤ 1 [Default] n = 0 [Description] Feed key control. (line mode only) n : Enable/Disable n Description 0 Feed one line 1 Feed one p age [Notes] This command is ignored in page mode.
US M Progr amming Reference VERSAJET [Name] Panel buttons control [Format] ASCII US M n Hex 1F 4D n Decimal 31 77 n [Range] 0 ≤ n ≤ 255 [Default] n = 3 [Description] Panel Buttons Control.
US a Progr amming Reference VERSAJET [Name] Get RS232 configurations [Format] ASCII US a Hex 1F 61 Decimal 31 97 [Return value] Function Length(Byte) V alue S tart byte 1 0x5F Contents 1 0~255 End byte 1 0x00 [Description] Get RS232 configurations.
Progr amming Reference VERSAJET [Notes] This is a real-time command that the printer executes upon receiving it. The printer returns 3 bytes, the first and thir d bytes are fixed values. Make sure the host computer can receive data from receiving buf fer .
US c Progr amming Reference VERSAJET [Name] Get Bluetooth configurations [Format] ASCII US c [Return value] Hex 1F 63 Decimal 31 99 Function Length (Byte) V alue S tart Byte 1 0x5F Enable/Disable Blue.
Progr amming Reference VERSAJET The return value of device name is a fixed le ngth of 15 bytes, filled with char 0x00(Null) for remaining bytes if the length of real data is smaller than 15.
US g Progr amming Reference VERSAJET [Name] Get printer configuration [Format] ASCII US g Hex 1F 67 Decimal 31 103 [Return value] Function Bytes V alue S tart Byte 1 0x5F Buzzer 1 0x00: Disable all 0x.
0x05: Reflective bottom to top Reserved 1 Power Off Duration When Connected Progr amming Reference VERSAJET 1 0x00~0xFF Power Off Duration When Disconnected 1 0x00~0xFF Printing Intensity Printing Int.
US h Progr amming Reference VERSAJET [Name] Get system information [Format] ASCII US h Hex 1F 68 Decimal 31 104 [Return value] Function Length (Byte) Va l u e S tart byte 1 0x5F Customer name 15 0x20~0x7E Model name 15 0x20~0x7E Firmware version 15 0x20~0x7E End byte 1 0x00 [Description] Get system information.
Progr amming Reference VERSAJET The return value of firmware version is a fixed length of 15 bytes, filled with char 0x00(Null) for remaining bytes if the leng th of real data is smaller than 15.
US k Progr amming Reference VERSAJET [Name] Get head resistance [Format] ASCII US k Hex 1F 6B Decimal 31 107 [Return value] Function Length (Byte) V alue S tart byte 1 0x5F Head max 4 0x00~0xFF Head min 4 0x00~0xFF Head average 4 0x00~0xFF End byte 1 0x00 [Notes] The printer returns 14 bytes, the first and last bytes are fi xed values.
US m Progr amming Reference VERSAJET [Name] Get printing log [Format] ASCII US m Hex 1F 6D Decimal 31 109 [Return value] Function Length (Byte) V alue S tart byte 1 0x5F Printing log 10 0x00~0xFF End byte 1 0x00 [Description] Get printing log. [Notes] This is a real-time command that the printer executes upon receiving it.
US n Progr amming Reference VERSAJET [Name] Get battery status [Format] ASCII US n Hex 1F 6E Decimal 31 1 10 [Return value] Function Length (Byte) V alue S tart byte 1 0x5F Battery status 1 0x30: less.
US r Progr amming Reference VERSAJET [Name] Get printer status [Format] ASCII US r Hex 1F 72 Decimal 31 1 14 [Return value] Function Length (Byte) V alue S tart byte 1 0x5F S tatus 1 0x30: Idle 0x31: .
An important point after buying a device Cino 3.00.01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cino 3.00.01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cino 3.00.01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cino 3.00.01 you will learn all the available features of the product, as well as information on its operation. The information that you get Cino 3.00.01 will certainly help you make a decision on the purchase.
If you already are a holder of Cino 3.00.01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cino 3.00.01.
However, one of the most important roles played by the user manual is to help in solving problems with Cino 3.00.01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cino 3.00.01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
