Instruction/ maintenance manual of the product PD412-5 Chromalox
Go to page of 2
Ch ro m alox ® DIVISION 4 SECTION CIT SALES REFERENCE DATE SERVICE REFERENCE Installation and OPERATING INSTRUCTIONS PD412-5 161-049179-001 MAY, 1999 (Supersedes PD412-4) © 2010 Chromalox, Inc. T ype CIT Cast Ir on, Metal Melting, Immersion Heaters Maximum Melt T emperature — 950˚F GENERAL WARNING: Hazard of Shock.
B. Through-the-Wall Model CIT-218 (Figure 3) is designed for through-the-wall installation. 1. To install, drill three holes in side of crucible at proper height using hole dimensions shown in Figure 4 or by using gasket enclosed with heater as a template.
An important point after buying a device Chromalox PD412-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chromalox PD412-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chromalox PD412-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chromalox PD412-5 you will learn all the available features of the product, as well as information on its operation. The information that you get Chromalox PD412-5 will certainly help you make a decision on the purchase.
If you already are a holder of Chromalox PD412-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chromalox PD412-5.
However, one of the most important roles played by the user manual is to help in solving problems with Chromalox PD412-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chromalox PD412-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
