Instruction/ maintenance manual of the product PWC2000 Chief
Go to page of 12
INSTALLATION INSTRUCTIONS Instrucciones de inst alación Installationsanleitung Instruções de Inst alação Istruzioni di inst allazione Installatie-instructies Instructions d´installation Large Fl.
PWC-2000 Installation Instructions 2 DISCLAIMER CSA V , Inc., and its affiliated co rporations and subsidiaries (collectively , "CSA V"), intend to make this manua l accurate and complete.
Installation Instructions PWC-2000 3 tragen kann. Andernfalls muss die Wand verstärkt werden, bevor die Komponente angebracht wird. W ARNUNG: Wenn das zulässige Ge wicht überschritten wird, kann di.
PWC-2000 Installation Instructions 4 maal het gezamenlijke gewicht van alle apparatuur kan dragen. Zonodig dient u de structuur vóór de montage van de component te versterken.
Installation Instructions PWC-2000 5 LEGEND T ighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixation.
PWC-2000 Installation Instructions 6 T OOLS REQUIRED FOR INST ALLA TION PA R T S 7/32" (5.5mm) 1/2" (12.7mm) B (2) 1/4"-20 x 1/2" (6.4mm-20 x 12.7mm) C (4) 1/4"-20 x 1/2" (6.4mm-20 x 12.7mm) D (2) 1/4"-20 (6.4mm-20) A (1) F (1) 5/32" (6.
Installation Instructions PWC-2000 7 INST ALLA TION MOUNT INST ALLA TION W ARNING: Failure to provide adequ ate structural strength for this component can result in serious personal injury or damage t.
PWC-2000 Installation Instructions 8 4. Carefully slide CPU between st rap (E) and rear surface of side plates (See Figure 5). Ensure the following: • Both loops of strap (E) are in front of the CPU; do not wrap strap (E) around back of CPU. • CPU is positioned so that cooling vents are not obstructed.
Installation Instructions PWC-2000 9 4. Rotate Q-Latch to the CLOSED position (See Figure 9). NOTE: If Q-Latch does not full y close, ensure mounting buttons are fully seated in the button openings. NOTE: OPTIONAL: A hole is p rovided in both the Q-Latch and the front plate to accommodate the insertion of a padlock or similar locking device.
PWC-2000 Installation Instructions 10.
Installation Instructions PWC-2000 11.
PWC-2000 Installation Instructions USA/International A 8401 Eagle Creek Parkway , Savage, MN 55378 P 800.582.6480 / 952 .894.6280 F 877.894.6918 / 952.
An important point after buying a device Chief PWC2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief PWC2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief PWC2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief PWC2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Chief PWC2000 will certainly help you make a decision on the purchase.
If you already are a holder of Chief PWC2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief PWC2000.
However, one of the most important roles played by the user manual is to help in solving problems with Chief PWC2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief PWC2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center