Instruction/ maintenance manual of the product PL-1 Chief Manufacturing
Go to page of 8
Chief Manufacturing, a division of Mileston e AV T echnol ogies 8401 Eagle Creek Park way, Savage, MN 55378 P: 800.582.6480 / 952.894.6280 F : 877.894.
Installation Instructions PL-1 2 IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possi bility of damage or destruction of equipment if you do not follow the corresponding instructions.
Installation Instructions PL-1 3 CONTENTS DIMENSIONAL DRAWING ............................................... 2 TOOLS REQUIRED FOR INSTALLATION ....................... 3 PARTS LIST ......................................................................
Installation Instructions PL-1 4 INSTALLATION This manual contains insta llation procedures that cov er pole-mounted applications: NOTE: Omit Step1 thru 3 and proceed to Step 4 if the projector is already installed on the 1-1/ 2” NPT pipe. 1. If projector is mounted, remove project or and SLB.
Installation Instructions PL-1 5 INSTALLATION (CONT’D) 8. Install the projector (see Figure 4 ). 9. Tightening the center t humb screw fi rst, make sure all thumb screws are tight.
Installation Instructions PL-1 6 INSTALLATION (CONT’D) 10. Route the cables (Figure 5). 11. Slide PL-1 halves together (see Figure 6). 12. Insert key. 13. To operate the lock, do the following: a. To lock the PL-1, turn the key (supplied ) 90° clockwise.
Installation Instructions PL-1 7.
Installation Instructions PL-1 8.
An important point after buying a device Chief Manufacturing PL-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief Manufacturing PL-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief Manufacturing PL-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief Manufacturing PL-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Chief Manufacturing PL-1 will certainly help you make a decision on the purchase.
If you already are a holder of Chief Manufacturing PL-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief Manufacturing PL-1.
However, one of the most important roles played by the user manual is to help in solving problems with Chief Manufacturing PL-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief Manufacturing PL-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
