Instruction/ maintenance manual of the product PAC-251 Chief Manufacturing
Go to page of 6
INSTALLATION INSTRUCTIONS 8809-00001 1 Rev D © 2008 Milestone A V T echnologies www.chiefmfg.com 10/08 BEFORE YOU BEGIN ©2008 Chief Manufacturing, a di vision of Milestone A V T echnologies 8401 Eagle Creek Parkway, Savage, MN 55378 P: 800.582.6480 / 952.
Model: PAC-251 Installation Instructions 2 IMPORT ANT W ARNINGS AND CAUTIONS! W ARNING: A W ARNING alerts you to the possibility of serious in jury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or dest ruction of equipme nt if you do not follow the correspond ing instructions.
Installation Instructions Model: PAC-251 3 T O OLS REQUIRED FOR INST ALLA TION • 1/8" Hex Wrench (pr ovided) PA R T S Unpack carton, inspect and verify contents.
Model: PAC-251 Installation Instructions 4 INST ALLA TION 1 2 Inst all Lower device Mounting Bracket s W ARNING: IMPROPER INST ALLA TION CAN LEAD TO DEVICE F A LLING ! All moun ting brackets must be securely fastened to device rack.
Installation Instructions Model: PAC-251 5 3 4 Adjust Lower device Mounting Bracket s 1. Position two d evice holding bracke ts (20) so that they are at their outermo st position. (see d etail in figure at le ft) 2. Slide device into rack until resting on two lower device mounting brackets (30).
Model: PAC-251 Installation Instructions 6 5 6 Adjust Upper Device Mounting Bracket s 1. Slide two device holding brackes (20) forward until they contact device.
An important point after buying a device Chief Manufacturing PAC-251 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief Manufacturing PAC-251 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief Manufacturing PAC-251 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief Manufacturing PAC-251 you will learn all the available features of the product, as well as information on its operation. The information that you get Chief Manufacturing PAC-251 will certainly help you make a decision on the purchase.
If you already are a holder of Chief Manufacturing PAC-251, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief Manufacturing PAC-251.
However, one of the most important roles played by the user manual is to help in solving problems with Chief Manufacturing PAC-251. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief Manufacturing PAC-251 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
