Instruction/ maintenance manual of the product NC1020 3D Connexion
Go to page of 6
The NC1020 server adapter is a single-port, copper, Gigabit Ethernet PCI bus adapter that supports basic server functionality. It runs over Category 5 (or better) twisted-pair cabling and is targeted to customers who deploy HP ProLiant 100 and 300 series servers.
Gigabit Ethernet Gigabit Ethernet Gigabit Ethernet Gigabit Ethernet Throughput Throughput Throughput Throughput Up to 1000Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes bottlenecks across the entire network.
Operating System Support Operating System Support Operating System Support Operating System Support 32-bit Windows Microsoft Windows Server 2003 Standard, Web, Small Business, and Enterprise Editions .
Additional Gigabit Server Additional Gigabit Server Additional Gigabit Server Additional Gigabit Server Adapters Adapters Adapters Adapters HP NC110T PCI Express Gigabit Server Adapter NOTE: NOTE: NOTE: NOTE: Does not support Windows 2000.
Compliance Compliance Compliance Compliance IEEE 802.3, 802.3u, Dynamic 802.3ad, and 802.3ab, 802.1x, 802.1Q and 802.1p PCI 2.3 ACPI v1.1a General Specifications General Specifications General Specifi.
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are US registered trademarks of Microsoft Corporation. Unix is a registered trademark of The Open Group.
An important point after buying a device 3D Connexion NC1020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3D Connexion NC1020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3D Connexion NC1020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3D Connexion NC1020 you will learn all the available features of the product, as well as information on its operation. The information that you get 3D Connexion NC1020 will certainly help you make a decision on the purchase.
If you already are a holder of 3D Connexion NC1020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3D Connexion NC1020.
However, one of the most important roles played by the user manual is to help in solving problems with 3D Connexion NC1020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3D Connexion NC1020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
