Instruction/ maintenance manual of the product KSA1022B Chief
Go to page of 16
INSTALLATION INSTRUCTIONS Instrucciones de inst alación Installationsanleitung Instruções de Inst alação Istruzioni di inst allazione Installatie-instructies Instructions d´installation SFP W AL.
KSA-1022 Installation Instructions 2 DISCLAIMER Milestone A V T echnologies and its affiliated corporations and subsidiaries (collectively "Mile stone"), intend to make this manual accurate and complete.
Installation Instructions KSA-1022 3 LEGEND T ighten Fastener Apretar elemento de fijación Befestigungsteil festzie hen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixatio.
KSA-1022 Installation Instructions 4 T OOLS REQUIRED FOR INST ALLA TION PA R T S 1/2" #2 7/64 1/8"(include d) A(1) B(6) C(6) D(6) E(6) F(6) H(6) J(1) 1/4-20 x 1 3/4" #10-24 x 1/2" .
Installation Instructions KSA-1022 5 W ALL TRACK INST ALLA TION 1. Determine mounting location on wall. 2. Determine whether wall tr ack accessory will be mounted horizontally or vertically . W ARNING: There is a limit on how man y components may be mounted on each bracket depend ing on the mounting method.
KSA-1022 Installation Instructions 6 2. Drill six 1/2" holes at locations marked in S tep 1. (See Figure 3) 3. Hold metal channel on ancho r (C) flat alongside plastic straps and slide channel through hole.
Installation Instructions KSA-1022 7 Horizont al Inst allation using W ood S tuds NOTE: Wall track accessory may be mounted horizontally to two studs that ar e 16", 20" or 24 " apart or to three studs that are 16 " apart. 1. Use a stud finder or similar method to de termine location of studs.
KSA-1022 Installation Instructions 8 Site Requirement s for Steel S tuds W ARNING: IMPROPER INST ALLA TION CAN LEAD T O EQUIPMENT F ALLING CAUS ING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! The figure below identifies the minimum reguirements for installation of display mo unts onto a steel stud structure.
Installation Instructions KSA-1022 9 V ertical Installation using S teel S tuds After determining the site meet s the installation requirements: 1. Identify desired mounting lo cation on wall.
KSA-1022 Installation Instructions 10 W ARNING: IMPROPER INST ALLA TI ON CAN LEAD T O EQUIPMENT F ALLI NG CAUSING SERIOUS PERSONAL INJURY O R DAMAGE TO EQ UIPMENT! Overtightening of mounting hardware can damag e the steel studs.
Installation Instructions KSA-1022 11 Figure 17 9. Snap off plastic straps on anchor at wall by pushing side to side, snapping off straps level with flange of plastic cap. (See Figure 18) 10. Repeat steps 6 through 9 for each mounting hole. Figure 18 1 1.
KSA-1022 Installation Instructions 12 Figure 20 1. Remove side cover to slide locking plate brackets (B) into wall track accessory (A) at the desired mounting locati on. (See Figure 21) NOTE: Locking plate brackets must be inserted into the top channel and second channel from th e bottom.
Installation Instructions KSA-1022 13 Computer Hardware Inst allation on V ertical Bracket W ARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer ’s responsibility to make sure the weight of each component attached to the KSA-1022 wall track accessory does not exceed 25 lbs (1 1.
KSA-1022 Installation Instructions 14 4. Reinstall side cover making sure the cable runs through the cable hole. (See Figure 22) Figure 24 1 cable management fla p cable path 4 3 (typical).
Installation Instructions KSA-1022 15.
KSA-1022 Installation Instructions USA/International A 8401 Eagle Creek Parkway , Savage, MN 55378 P 800.582.6480 / 952 .894.6280 F 877.894.6918 / 952 .
An important point after buying a device Chief KSA1022B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief KSA1022B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief KSA1022B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief KSA1022B you will learn all the available features of the product, as well as information on its operation. The information that you get Chief KSA1022B will certainly help you make a decision on the purchase.
If you already are a holder of Chief KSA1022B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief KSA1022B.
However, one of the most important roles played by the user manual is to help in solving problems with Chief KSA1022B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief KSA1022B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center