Instruction/ maintenance manual of the product FWS110B Chief
Go to page of 16
INSTALLATION INSTRUCTIONS CHIEF MANUF ACTURING INC. 1-800-582-6480 952-894-628 0 F AX 952-894-6918 8401 EAGLE CREEK P ARKWA Y , STE 700 SA V AGE, MINNESOT A 55378 USA 8832-000173 RevB © 2007 Chief Manufacturi ng www .
Model: F-Series Installation Instructions 2 IMPORT ANT W ARNINGS AND CAUTIONS! W ARN ING: A W ARNING alert s you to the possibility of serious in jury or death if you do not follow the inst ructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the correspond ing instructions .
Installation Instructions Model: F-Series 3 SPECIFICA TIONS T able 1: Mounts MODEL NO. OF DISPLA YS TRA YS SUPPORTING STRUCTURE NO. OF MOUNTING ARMS ADJUST AB LE HEIGHT MAX. EXTENSION (INCHES) MIN. CLOSED DEPTH (INCHES) MAX. SUPPORT WEIGHT (LBS.) FWP-1 10 Single W all None No None 2.
Model: F-Series Installation Instructions 4 MOUNT INST ALLA TION INST ALLA TION T O W ALL 1. V erify that yo u have the fo llowing parts: 2. Determine location for mo unt keeping in mind display size, extension, height adjustment (if app licable), and pitch/roll requir ements.
Installation Instructions Model: F-Series 5 INST ALLA TION TO DESK T wo installation options exist: • Edge Installation • Hole (Grommet) Insta llation; requires 3/8" to 3" diameter ho le and access to the bottom of the desk ASSEMBL Y 1. V erify that yo u have the fo llowing parts: 2.
Model: F-Series Installation Instructions 6 Figure 7: Remove Clamp Adjustment Screw 3. Using 2.5mm hex key , re-i ns tall baseplate with three reta ined attach screws.
Installation Instructions Model: F-Series 7 DISPLA Y INST ALLA TION SINGLE DISPLA Y AND FCY -210/-220 NOTE: If you are installing DUAL / TRIPLE displays FMA-220/-320 , then proceed to page 9. The mounting holes on the back of your display will either be flush with the back surfac e, or recessed into the back surface.
Model: F-Series Installation Instructions 8 Figure 1 1: Single Display - Recessed Mount CAUTION: Using screws of improper size may damage your display! Proper scre w s will easily and completely thread into display mo unting holes.
Installation Instructions Model: F-Series 9 DUAL / TRIPLE DISPLA Y (FMA-220/-320 and KGL-220 ONL Y) The mounting hole s on the rear of your display will either be flush with the r ear surface, or recessed into the rear surface. Refer to the applicable inst allation procedure.
Model: F-Series Installation Instructions 10 ARRA Y ASSEMBL Y (DUAL / TRIPLE DISPLA Y ; FMA-220/-320 ONL Y) 1. V erify that yo u have the fo llowing parts: 2. Inst all pin (60) and spacer (70) into upper mount arm bore (See Figur e 14). Figure 14: Assemble Array 3.
Installation Instructions Model: F-Series 11 MUL TI-DUAL ARM ASSEMBL Y (FCY -210/-220, and FGL-220 ONL Y) BASIC ASSEMBL Y 1. V erify that yo u have the fo llowing parts: 2. Insert pin (60) int o Y - connector up per bore in mount (20) (See Figure 1 7).
Model: F-Series Installation Instructions 12 MODIFICA TION If desired, each arm assemb ly (10) may be modified to prevent move ment of the oute r arm relative to the inner arm (without loosening the adjustment scre w ).
Installation Instructions Model: F-Series 13 CABLE MANAGEMENT 1. Att ach all cables to display . 2. Open the ca ble management bracket by sliding it towards the edge of the arm (See Figure 20). NOTE: If necessary, cable ma nagement bracket attach screws may be loosened using hex key (30) .
Model: F-Series Installation Instructions 14 ADJUSTMENT ARM PIVOT / SWING CAUTION: If washer (80) has been u sed to assemble FCY -21 0/-220 arms, then forced movement of arm s without loosening screw (3 0) will damage arm and/or Y -connect or (See Figure 17)(See Figure 19).
Installation Instructions Model: F-Series 15.
Model: F-Series Installation Instructions 16.
An important point after buying a device Chief FWS110B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chief FWS110B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chief FWS110B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chief FWS110B you will learn all the available features of the product, as well as information on its operation. The information that you get Chief FWS110B will certainly help you make a decision on the purchase.
If you already are a holder of Chief FWS110B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chief FWS110B.
However, one of the most important roles played by the user manual is to help in solving problems with Chief FWS110B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chief FWS110B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
