Instruction/ maintenance manual of the product 96405 Chicago Electric
Go to page of 19
TELESCOPING POLE SA W Model 96405 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual are not drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.
Page 2 SKU 96405 For technical questions, please call 1-800-444-3353. CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 GENERAL SAFETY RULES ................................................. 3 Work Area ...........................
Page 3 SKU 96405 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 4 SKU 96405 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury . The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool.
Page 5 SKU 96405 For technical questions, please call 1-800-444-3353. Avoid accidental starting. Ensure the switch is in the “OFF” position before plugging in. Carrying power tools with your nger on the switch or plugging in power tools that have the switch on invites accidents.
Page 6 SKU 96405 For technical questions, please call 1-800-444-3353. Service Have your power tool serviced by a qualied repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained . SPECIFIC SAFETY RULES Only use the Pole Saw to cut wood.
Page 7 SKU 96405 For technical questions, please call 1-800-444-3353. pacemaker failure. People with pacemakers should consult their physician(s) for advice.
Page 8 SKU 96405 For technical questions, please call 1-800-444-3353. understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator . SA VE THESE INSTRUCTIONS. GROUNDING Improperly connecting the grounding wire can result in electric shock.
Page 9 SKU 96405 For technical questions, please call 1-800-444-3353. Double Insulated T ools: T ools with T wo Prong Plugs T ools marked “Double Insulated” do not require grounding. They have a special double insulation system which satises OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc.
Page 10 SKU 96405 For technical questions, please call 1-800-444-3353. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 0 – 2.0 18 18 18 18 16 2.
Page 1 1 SKU 96405 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz Motor No Load Amperage 3.5<->4.0 AMPS Blade 8” (Cutting Capacity = 6.7”) Chain Speed 3149 Feet Per Minute Chain Specs Pitch: 3/8” Gauge” 0.
Page 12 SKU 96405 For technical questions, please call 1-800-444-3353. Always turn the Power Switch of the Pole Saw to the “OFF” position, unplug it from the outlet, and allow it to cool down completely before adding oil. T o ll the Oil T ank (42), remove the Oil Cap (41) and add up to 5 Ounces of high- quality chain saw oil.
Page 13 SKU 96405 For technical questions, please call 1-800-444-3353. OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 14 SKU 96405 For technical questions, please call 1-800-444-3353. IMPORT ANT : After running the Pole Saw for an extended period of time, allow the Engine to idle for several minutes to dissipate heat. This will prevent the Pole Saw from being damaged by overheating.
Page 15 SKU 96405 For technical questions, please call 1-800-444-3353. MAINTENANCE AND SERVICING Risk of serious personal injury from accidental starting or electric shock.
Page 16 SKU 96405 For technical questions, please call 1-800-444-3353. Problem Possible Causes Probable Solutions Pole Saw runs slowly and stalls easily Power supply receiving low voltage. 1. Extension cord wire size is too small. 1. Pole Saw does not run when Power Switch is depressed.
Page 17 SKU 96405 For technical questions, please call 1-800-444-3353. Part Description 1 Screw ST 4x18 2 Plastic End Cap 3 Screw M5x58 4 Spring W asher 5 W asher 8x4.
Page 18 SKU 96405 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM.
Page 19 SKU 96405 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Chicago Electric 96405 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 96405 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 96405 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 96405 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 96405 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 96405, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 96405.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 96405. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 96405 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
