Instruction/ maintenance manual of the product 96289 Chicago Electric
Go to page of 15
ELECTRIC HEA T GUN 1500 W A TT Model 96289 SET -UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 96289 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 96289 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury .
Page 4 SKU 96289 For technical questions, please call 1-800-444-3353. Avoid accidental starting. Ensure the switch is in the of f-position before c. plugging in. Carrying power tools with your nger on the switch or plugging in power tools that have the switch on invites accidents.
Page 5 SKU 96289 For technical questions, please call 1-800-444-3353. W ARNING! 2. Extreme care should be taken when stripping paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Any pre- 1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead.
Page 6 SKU 96289 For technical questions, please call 1-800-444-3353. The Nozzle becomes very hot. Do not lay the Heat Gun on ammable surfaces • when operating the Gun or immediately after turning the Gun off. Always set the Heat Gun on a at, level surface so that the Nozzle tip is directed upwards and away from the supporting surface.
Page 7 SKU 96289 For technical questions, please call 1-800-444-3353. Do not drop the Heat Gun as the heating elements may be damaged. 13. People with pacemakers should consult their physician(s) before use. 14. Electromagnetic elds in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
Page 8 SKU 96289 For technical questions, please call 1-800-444-3353. Grounded T ools: T ools with Three Prong Plugs T ools marked with “Grounding Required” have a three wire cord and three prong 1. grounding plug. The plug must be connected to a properly grounded outlet.
Page 9 SKU 96289 For technical questions, please call 1-800-444-3353. The smaller the gauge number of the wire, the greater the capacity of the cord. 3. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See T able A.) When using more than one extension cord to make up the total length, make 4.
Page 10 SKU 96289 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz / 1500 W atts (12.5 Amps (Peak) Power Cord: 16 A WG x 2C / 6’ Long Power.
Page 1 1 SKU 96289 For technical questions, please call 1-800-444-3353. Product Applications When observing the safety rules, this Heat Gun is designed for all applications 1. with hot air that are listed below: Shrinking of shrinkdown tubing, solder connectors and solder terminals, • packaging and electrical components.
Page 12 SKU 96289 For technical questions, please call 1-800-444-3353. General Operating Procedures Make sure the Power Switch (3) is in its 1. “0” (OFF) position. Then plug the Pow- er Cord (1) of the tool into the nearest 120 volt, grounded, electrical outlet.
Page 13 SKU 96289 For technical questions, please call 1-800-444-3353. AFTER USE, 3. clean the external surfaces of the tool with a clean, moist cloth and mild detergent. Then dry . Do not use solvents. CAUTION! 4. All maintenance, service, and repairs not mentioned in this manual must only be performed by a qualied service technician.
Page 14 SKU 96289 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM.
Page 15 SKU 96289 For technical questions, please call 1-800-444-3353. Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
An important point after buying a device Chicago Electric 96289 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 96289 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 96289 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 96289 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 96289 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 96289, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 96289.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 96289. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 96289 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
