Instruction/ maintenance manual of the product 9624 Chicago Electric
Go to page of 12
ELECTRIC DR YW ALL SCREWDRIVER Model 9624 SET up AnD OpERA TIng InSTRuCTIOnS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE ThIS MAnuAL. Copyright © 2003 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 9624 SA VE ThIS MAnuAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1-800-444-3353. SKU 9624 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock.
Page 4 For technical questions, please call 1-800-444-3353. SKU 9624 with the switch is dangerous and must be repaired. Disconnect the plug from the power c. source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Page 5 For technical questions, please call 1-800-444-3353. SKU 9624 grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
Page 6 For technical questions, please call 1-800-444-3353. SKU 9624 SA VE ThESE InSTRuCTIOnS. gROunDIng TO pREVEnT ELECTRIC ShOCK AnD DEA Th FROM InCORRECT gROunDIng WIRE COnnECTIOn: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
Page 7 For technical questions, please call 1-800-444-3353. SKU 9624 Extension Cords Grounded 1. tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet 2.
Page 8 For technical questions, please call 1-800-444-3353. SKU 9624 SpECIFICA TIOnS Electrical Input 120 V~ / 60 Hz / 4.2 A (Rated) Motor Speed 2250 RPM (No Load) VSR Drive 1/4” Hex Additional Feat.
Page 9 For technical questions, please call 1-800-444-3353. SKU 9624 T o Change The Bit: Pull forward on the Depth Collar (2) and 1. remove it from the Clutch Housing (5). (See Figure A.) Pull the Bit (3) straight out with pliers if it 2. is difcult to remove.
Page 10 For technical questions, please call 1-800-444-3353. SKU 9624 InSpECTIOn, MAInTEnAnCE, AnD CLEAnIng TO pREVEnT SERIOuS InJuR Y FROM ACCIDEnT AL OpERA TIOn: unplug the power Cord (43) from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 9624 p ARTS LIST AnD DIAgRAM part Description 1 Locator 2 Depth Collar 3 Bit 4 Bit T ip Holder 5 Clutch Housing 6 Shaft Seal 7 Spindle 8 Steel Ball 9 Clutch 10 Retaining Ring 11 Guide 12 Spring 13 Bearing Retainer 14 Ball Bearing 15 Gear Case 16 Screw (4.
Page 12 For technical questions, please call 1-800-444-3353. SKU 9624 LIMITED 90 DA Y W ARRAnTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabilit.
An important point after buying a device Chicago Electric 9624 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 9624 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 9624 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 9624 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 9624 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 9624, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 9624.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 9624. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 9624 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
