Instruction/ maintenance manual of the product 95380 Chicago Electric
Go to page of 18
ROUTER T ABLE WITH ROUTER Model 95380 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2006 by Harbor Freight T ools ® .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 2 SPECIFICA TIONS Motor 1 10 V AC / 60 Hz / 1 1 A / 1-3/4 HP / 20,000 Maximum RPM Router T ype Plunge Router with Brake Router Power.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 3 ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 4 7. Use safety equipment. Always wear ANSI-approved safety impact eye goggles. Dust mask or respirator , and hearing protection must be used for appropriate conditions. T OOL USE AND CARE 1.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 5 SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Router and its T able. These carry important information. If unreadable or missing, contact Harbor Freight T ools for a replacement.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 6 17. Never cut pieces too small to be held securely against the T able’ s Fence without leaving enough space for the hand to be a safe distance from the Router Bit (not included) .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 7 examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 8 3. The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 9 ASSEMBL Y INSTRUCTIONS Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on pages 16 and 17 .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 10 T o Mount The Router T able On A Workbench: 1. CAUTION! Make sure the Router T able is securely attached to a dry , at, level, sturdy workbench surface capable of supporting the weight of the unit, accessories, and workpieces.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 1 1 T o Connect A V acuum Hose T o The Dust Port: Figure C DUST PORT (1-3/8” OUTSIDE DIAMETER) The Dust Port of the Router T able is 1-3/8” O.D. (outside diameter) and is located at the rear of the Router T able.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 12 T o Install A Router Bit: 1. W ARNING! Make sure the Power Switch of the Router T able is in its “OFF” position and the Router T able is not plugged into an electrical outlet. 2.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 13 BASIC OPERA TING INSTRUCTIONS W ARNING! Use safety equipment. Always wear ANSI- approved safety impact eye goggles. Dust mask or respirator , and hearing protection must be used for appropriate conditions.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 14 TROUBLESHOOTING Problem Possible Solution Router will not run. 1. Make sure the Power Switch of the Router T able is in its “ON” position. 2. Make sure the Power Switch of the Router is in its “ON” position.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 15 INSPECTION, MAINTENANCE, AND CLEANING 1. CAUTION! Always make sure the Power Switch of the Router T able is in its “OFF” position and the Router T able is unplugged from its electrical outlet prior to performing any inspection, maintenance, or cleaning procedures.
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 16 P ARTS LISTS & ASSEMBL Y DIAGRAMS P ARTS LIST & ASSEMBL Y DIAGRAM A - ROUTER Part Description Qty .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 17 P ARTS LIST & ASSEMBL Y DIAGRAM B - ROUTER T ABLE Part Description Qty . 1B Leg 4 2B Power Switch/Outlets 1 3B Fixed Stand 1 .
SKU 95380 For technical questions, please call 1-800-444-3353 P AGE 18 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Chicago Electric 95380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 95380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 95380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 95380 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 95380 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 95380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 95380.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 95380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 95380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
