Instruction/ maintenance manual of the product 93801 Chicago Electric
Go to page of 9
® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.com Copyright © 2006 by Harbor F reight T ools ® . All r ights reser v ed. No por tion of this instruction sheet or any artwork contained herein may be reproduced in any shape or f or m without the express written consent of Harbor F reight T ools.
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 2 SAFETY W ARNINGS AND PRECA UTIONS 1. W ARNING! A v oid risk of fire. Prior to installation remove the cables from the negative terminals of all the batteries on your vehicle. 2.
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 3 PR ODUCT SPECIFICA TIONS PRODUCT APPLICA TIONS 1. Make sure to thoroughly review the Applications Chart below prior to installing the Isolator . These Group designations are pertinent when reading all subse- quent instructions in this manual.
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 4 GENERAL INST ALLA TION INSTRUCTIONS PR ODUCT USA GE: The Batter y Isolator allows maintenance-free and deep cycle batteries to be properly charged and also offers dual battery control.
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 5 8. Locate the “B A T” ter minal at the rear of the alternator . Disconnect ALL the wires (including the voltage regulator sensing wire if present) from the BA T terminal of the alternator .
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 6 1 0 . Mount a circuit breaker (not included) as near to the auxiliary battery as possible, but away from engine or exhaust heat (See “Recommended Wire Size/Circuit Breaker” Chart for proper size).
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 7 SPECIAL INSTRUCTIONS FOR FORD INST ALLA TIONS (1985 AND LA TER) 1. NOTE: This section applies to Ford alternators with 2 plug-in connections. If your alternator has an output bolt, return to Step #10 of the “General Installa- tion Instructions” (page 6).
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 8 ELECTRICAL TEST PROCEDURES 1. NO TE: Connect the negativ e test lead to the negative (–) terminal on the batter y . T esting With The Engine Not Running: The #1 ter minal of the Isolator should read vehicle battery voltage .
SKU 93801/93802 For technical questions, please call 1-800-444-3353. PAGE 9 Part # Description Qty. 1 Batter y Isola tor 1 2 Hex Nut (5/16” x 1-1/ 4” STD Thread) 3 3 Hex/Sp eed Nut (5/16” x 1-1/4” STD Thread) 3 4 Hex Head Sheet Metal Screw (#10) 4 5 Split -Lock Washer (1/4” I.
An important point after buying a device Chicago Electric 93801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 93801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 93801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 93801 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 93801 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 93801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 93801.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 93801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 93801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
