Instruction/ maintenance manual of the product 91511 Chicago Electric
Go to page of 17
7” POR T ABLE WET TILE SA W Model 91511 ASSEMBL Y AND OPERA TING INSTR UCTIONS Distributed Exclusiv ely by Harbor F reight T ools 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.com Cop yr ight © 2004 b y Harbor F reight T ools ® .
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety w ar nings and precautions , assembly , operat- ing, inspection, maintenance and cleaning procedures, par ts list and assemb ly diagram. K eep your in voice with this manual.
3. Keep b ystanders, children, and visitors awa y while operating a power tool. Distractions can cause y ou to lose control. Protect others in the work area from debris such as chips and spar ks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not use the power tool if the P ower Switc h does not turn it on or off. Any tool that cannot be controlled with the P ower Switch is dangerous and must be replaced. 3. Disconnect the P ower Cor d Plug from the po wer source bef ore making any adjustments, changing accessories, or storing the tool.
2. Double insulated tools are equipped with a polarized plug (one prong is wider than the other). This plug will fit in a polarized outlet only one wa y . If the plug does not fit fully in the outlet, rever se the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet.
resistance path to carr y electricity aw a y from the user , reducing the r isk of elec- tric shock. (See Figure A.) 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool.
5. If you are using one e xtension cord f or more than one tool, add the nameplate amperes and use the sum to deter mine the required minimum cord siz e. (See Figure B.) 6. If you are using an e xtension cord outdoors, mak e sure it is mar k ed with the suf- fix “W-A” (“W” in Canada) to indicate it is acceptab le for outdoor use .
SPECIFIC SAFETY R ULES 1. Maintain labels and nameplates on the W et Tile Saw . These carr y impor tant inf or mation. If unreadable or missing, contact Harbor F reight T ools for a replace- ment. 2. D ANGER! Keep hands and fingers a way fr om cutting area and Saw Blade.
13. Bef ore using the W et Tile Saw , make sure the Saw Blade is pr operly mounted on the Saw Spindle. Make sure the Sa w Blade is balanced, and is not crac ked or bent. 14. The Saw Blade will become hot while cutting. Allo w the Saw Blade to completely cool bef ore touching.
SKU 91511 P A GE 10 25. W ARNING! People with pacemaker s should consult their ph ysician(s) before using this pr oduct. Electromagnetic fields in close proximity to a hear t pacemaker could cause interf erence to or f ailure of the pacemaker .
SKU 91511 P A GE 11 Saw Blade (6) from the Spindle of the Wet Tile Saw . Then, install a new diamond Saw Blade with a 7” diameter , 5/8” round arbor hole, and rated at a mini- mum 3,600 RPM.
SKU 91511 P A GE 12 3. Check to mak e sure the Blade Guard (2) mov es freely upward and downw ard. (See Figure D .) 4. Close the Left Side Cutting T ab le (26). (See Figure D.) T o Attach The Fence And Miter Guide: 1. Place the F ence (11) on top of the Right Cutting T able (10) and clamp both ends of the F ence to secure it in place.
SKU 91511 P A GE 13 3. Make sure the P ower Switch (21) is in its “OFF” position. Then, plug the P ower Cord (17) into the nearest 120 v olt, grounded, electrical outlet. (See Figure G.) T o P erform Straight Cutting: 1. Lift the front and rear Le vers of the F ence (11).
SKU 91511 P A GE 14 FIGURE G WORKPIECE (NO T INCLUDED) FENCE (11) FENCE SCALE FENCE LEVER FENCE LEVER PO WER SWITCH (21) 2. Raise the Right Cutting T ab le (10) to the desired angle of cut (i.
SKU 91511 P A GE 15 FIGURE H RIGHT CUTTING T ABLE (10) WORKPIECE (NO T INCLUDED) PO WER SWITCH (21) ST AND (0 to 60 ) and tighten the Lock Knob to loc k the Miter Guide in place. (See Figure I.) 3. Place the workpiece flush against the Miter Guide (24).
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Always make sure the P ower Switc h (21) is in its “OFF” position, and unplug the P ower Cord (17) fr om its 120 volt electrical outlet before perf orming any inspection, adjustments, maintenance, or c leaning.
P AR TS LIST SKU 91511 P A GE 17 P AR TS LIST SKU 91511 P A GE 17 Part # Description Qt y . Part # Description Qty. 1 Screw 1 18 Motor Bottom Base 1 2 Blade Guard 1 19 Electrical Cord Fixed Head 1 3 W.
An important point after buying a device Chicago Electric 91511 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 91511 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 91511 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 91511 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 91511 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 91511, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 91511.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 91511. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 91511 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
