Instruction/ maintenance manual of the product 69231 Chicago Electric
Go to page of 16
ITEM 69231 7″ PORT ABLE WET CUTTING TILE SA W Visit our website at: http://www .harborfreight.com Email our technical support at: tech@harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP T able of Contents Safety ......................................................... 2 Specifications ...........................................
Page 3 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP T able A: RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120 VOL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25′ 50′ 100′ 150′ 0 – 6 18 16 16 14 6.
Page 4 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Grounding Instructions TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 1 10-120 V~ Grounded T ools: T ools with Three Prong Plugs 1.
Page 5 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP d. Freehand – Feeding a workpiece through the saw without using a fence or guided support to guide it. NOT A SAFE METHOD. e. Kerf – The gap made by the saw in the workpiece.
Page 6 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Essential Straight Push-stick Features and Functions Note: Straight style (traditional) stick shown. A different stick design may be used if it properly protects against all hazards.
Page 7 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP POSITION OF TILE SA W Figure B: Drip Loop Power Cord Tile Saw Drip Loop 1.
Page 8 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP V ibration Safety This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury , particularly to the hands, arms and shoulders.
Page 9 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Specifications Electrical Rating 120V~ / 60Hz / 4.
Page 10 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Operating Instructions Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 1 1 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Positioning the Miter Guide Place the Miter Guide against the Rip Fence. W ork Piece and W ork Area Set Up 1. Designate a work area that is clean and well-lit.
Page 12 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP 3. For Straight/Miter Cuts: a. Install the Rip Fence on the T able T op with or without the Miter Gauge. b. Place the workpiece on the T able and firmly against the Miter Gauge and/or Rip Fence.
Page 13 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician.
Page 14 For technical questions, please call 1-800-444-3353. Item 69231 SAFETY OPERA TION MAINTENANCE SETUP Part Description Qty 1 Hex Nut M5 1 2 Upper Blade Guard 1 3 Bracket 1 4 W arning Label 1 5 R.
Page 15 For technical questions, please call 1-800-444-3353. Item 69231 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
An important point after buying a device Chicago Electric 69231 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 69231 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 69231 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 69231 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 69231 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 69231, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 69231.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 69231. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 69231 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
