Instruction/ maintenance manual of the product 42802 Chicago Electric
Go to page of 10
POWDER COA TING SYSTEM 42802 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICA TIONS Power Consumption 120 V~, 60 Hz Air Supply 20 to 40 PSI, dry air Air Inlet 1/4 inch NPT thread Power Cord 16 A WG Note: Performance of this tool may vary depending on variations in local line voltage.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 3 Maintain tools with care 10. . Keep tools sharp and clean for better and safer performance. Follow instruc- tions for lubricating and changing accessories. Inspect tool cords peri- odically and, if damaged, have them repaired by an authorized technician.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 4 product, but must be supplied by the operator . Additional Safety W arnings for the Powder Coating System The powder dust is ammable 1. when oating in the air . - V entilate the area well.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 5 PREP ARA TION Setup an air supply with an air pres- 1. sure regulator and moisture trap (do not use an inline air oiler). The air compressor must provide an air pres- sure of 20 to 40 PSI.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 6 T rigger (7) Pressure Reducer V alve (18) Cup (4) Scatter Tip (12) Regulating Screw (14) 3. Unscrew the Cup (4) from the Spray Gun (2) and ll with up to two inches of coating powder (not supplied).
SKU 42802 For technical questions, please call 1-800-444-3353. Page 7 - When completed, the object should be completely coated with a dull, opaque coat of powder .
SKU 42802 For technical questions, please call 1-800-444-3353. Page 8 MAINTENANCE Wear disposable vinyl gloves. 1. Unplug the Control Box line cord from 2. the electrical outlet. Discharge the Conducting Pole (9) to 3. the Ground Clip (10). Disconnect the air hose from the 4.
SKU 42802 For technical questions, please call 1-800-444-3353. Page 9 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 42802 For technical questions, please call 1-800-444-3353. Page 10 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabil.
An important point after buying a device Chicago Electric 42802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 42802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 42802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 42802 you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 42802 will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 42802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 42802.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 42802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 42802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
