Instruction/ maintenance manual of the product ST-800X Chauvet
Go to page of 16
CHAUVET, 3000 N 29 th Ct, Hollywood, FL 33020 U .S.A (800) 762-1084 – (954) 929 -1115 FAX (954) 929-5560 www.chauvetlighting.com 2007-03-07 / 10:58 DMX Mega Strobe™ II ST-800X USER MANUAL.
ST-800X User Manual 2 2007-03-07 / 10:58 ©CHAUVET, 2006, All Rights Re served Information and s pecifications i n this User Ma nual are subject t o change w ithout notice. CHAUVET a s sum es no responsibility or liability f o r any errors or inaccuracies that may appear in this man ual .
ST-800X User Manual 3 2007-03-07 / 10:58 1. Before Y ou Begin Unpacking Instructions Immediately upon receiving a product, carefully unpa ck the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Before You Begi n ST-800X User Manual 4 2007-03-07 / 10:58 Important Safety Information This product is designed for profe ssional use. It is not intended fo r use in a househo ld environment. This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp explosion, and injury from falls.
ST-800X User Manual 5 2007-03-07 / 10:58 2. Introduction Features • 2-channel 750-watts DMX-512 strobe light • Adjustable flash rate 1-20fps • Variable electronic dimmer (0-100%) • Manual dimm.
Introduction ST-800X User Manual 6 2007-03-07 / 10:58 Safety Glass Hanging Yoke DIM SPEED Speed Rotary knob Strobe Intensity 1 2 3 4 5 6 7 8 9 1 2 4 8 16 32 64 128 256 DMX ADD 1 2 -Hz Term ON – 60Hz.
ST-800X User Manual 7 2007-03-07 / 10:58 Hanging Clamp 3. Setup AC Power Warning! Verify that the power re quirement label on y our unit matche s the line voltage applied.
Setup ST-800X User Manual 8 2007-03-07 / 10:58 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixt ures set to a master/slave operating mode.
Setup ST-800X User Manual 9 2007-03-07 / 10:58 This drawing provides a general illustration of the DMX Input/Output panel of a lighting Universal DMX Controller Continue the link Often, the setup for .
ST-800X User Manual 10 2007-03-07 / 10:58 CH-750B Lamp Unscrew and release lamp wires from the main PCB. Unscrew grounding w ire from PCB. Lamp is removed and repla ced through the fron t of the fixture. You mu st first remov e the glass cov er. Attempt to remove the lamp after you hav e released all w ire leads from the PCB.
ST-800X User Manual 11 2007-03-07 / 10:58 SPEED DIM SPEED DIM DMX Out DMX In 4. Operating Instructions Operating Modes • A stand-alone mode will allow the user to set the desired speed and intensity. • Master/Slave output provides for unison triggering of chained strobes.
Operating Instructions ST-800X User Manual 12 2007-03-07 / 10:58 Setting the DMX Address Each fixture requires a "start address" from 1 to 51 1. A fixture requiring one or more channels for control begins to read the data on the channel indica ted by the start address.
ST-800X User Manual 13 2007-03-07 / 10:58 5. Appendix Returns Procedure Returned merchandise must be sent prepaid and in t he original packing, call tags will not be issued. Package must be clearly labeled with a Return Merc handise Author ization Number (RA #).
Appendix ST-800X User Manual 14 2007-03-07 / 10:58 Binary & DMX DIP-switch Addressing Each DIP-switch has an associated value. Adding t he value of each switch in the ON position will provide the final address. Determining which switc hes to toggle ON given a specific desired address or value can be accomplished in the following manner.
Appendix ST-800X User Manual 15 2007-03-07 / 10:58 Binary Addressing Quick Reference Chart DMX & Binary Address Quick Reference Chart DIP-switch Position DMX DIP-SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 .
Appendix ST-800X User Manual 16 2007-03-07 / 10:58 DMX Channel Values C HANNEL V ALU E F UNCTION 1 000 Ù 255 Flash Rate Slow <> Fast 2 000 Ù 255 Flash Intensity Blackout <> Full Brightness Technical Specifications WEIGHT & DIMENSIONS Length.
An important point after buying a device Chauvet ST-800X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chauvet ST-800X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chauvet ST-800X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chauvet ST-800X you will learn all the available features of the product, as well as information on its operation. The information that you get Chauvet ST-800X will certainly help you make a decision on the purchase.
If you already are a holder of Chauvet ST-800X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chauvet ST-800X.
However, one of the most important roles played by the user manual is to help in solving problems with Chauvet ST-800X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chauvet ST-800X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
