Instruction/ maintenance manual of the product DMX512 Chauvet
Go to page of 12
SX Gobo™ Snapshot Ok on Dimmer Outdoor OK Sound Activated DMX512 Master/Slave 115V/230V Switch Replaceable Fuse User Serviceable Duty Cycle USER MANUAL Chauvet, 3000 N 2 9 th Ct, Hollywood, FL 33020 U.S.A. (800) 762-1084 – (954 ) 929-1115 FAX (954) 929-5560 www.
T ABLE OF C ONTENTS 1. BEFORE YOU BEGIN ............................................................................................................ ................... . 3 W HAT IS INCLUDED ............................................................
1. B EFORE Y OU B EGIN What is included ¾ 1 x SX Gobo™ ¾ EHJ 24V 250W Lamp ¾ 7 Replaceable Gobos ¾ Warranty Card ¾ User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
Safety Instructions Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product. x Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
2. I NTRODUCTION Features x High-output rotating gobo projector x Interchangeable rotating color/gobos 6 metal gobos with 5 dichroic colors + white x Dual spring clips for a single dichroic color x Ad.
3. S ETUP Lamp You will need to install a lamp prior to the initial operation of the fixture. An 800W halogen lamp is included. Warning! When replacing the lamp, please wait 15 minutes after powering down to allow the unit to cool down! Always disconnect from main power prior to lamp replacement.
Lamp Alignment How-To Lamp alignment screws Often, after a new installation of a lamp, you will find that there is an uneven field of light or what is refered to as a hot spot. This is due to the most intense point of the lamp source not being positioned optimally within the reflector.
Figure A Figure B Figure C Replacing Gobos 1) Open the top cover by removing the six screws indicated in figure A. 2) Remove the retaining spring using a flathead screwdriver (figure B). 3) Remove the gobo and replace with a new gobo. Note: The black side of the g obo should be facing the lamp.
Mounting ORIENTATION This fixture may be mounted in any position provided there is adequate room for v entilation. RIGGING Hanging Clamp It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp.
General Troubleshooting Applies to Symptom Solution(s) Lights Foggers & Snow Controllers Dimmers & Chaser Auto shut off Check fan thermal switch reset 9 Beam is very dim or not bright Clean op.
Technical Support Address: Service Dept. 3000 N 29th Ct, Hollywood, FL 33020 (U.S.A. ) Support (Email): tech@chauvetlighting.com Telephone: (954) 929-1115 - (Pre ss 4) Fax: (954) 929-5560 - (Attention: Service) Website: http://www.chauvetlighting.com 5.
Claims Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon recei pt of merchandise. It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping.
An important point after buying a device Chauvet DMX512 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chauvet DMX512 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chauvet DMX512 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chauvet DMX512 you will learn all the available features of the product, as well as information on its operation. The information that you get Chauvet DMX512 will certainly help you make a decision on the purchase.
If you already are a holder of Chauvet DMX512, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chauvet DMX512.
However, one of the most important roles played by the user manual is to help in solving problems with Chauvet DMX512. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chauvet DMX512 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
