Instruction/ maintenance manual of the product W-4000 Channel Vision
Go to page of 2
The original version of the W -4000 was shipped with a 9V AC power supply . It was capable of using either a 9V AC or 12VDC power supply . Beginning in July of 2005, the circuit was changed so that it could only accept a 12VDC power supply .
2 The images below show how to visually identify the different circuit boards. CHANNEL VISION Costa Mesa CA 92626 Costa Mesa CA 92626 1-800-840-0288 www .
An important point after buying a device Channel Vision W-4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Channel Vision W-4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Channel Vision W-4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Channel Vision W-4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Channel Vision W-4000 will certainly help you make a decision on the purchase.
If you already are a holder of Channel Vision W-4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Channel Vision W-4000.
However, one of the most important roles played by the user manual is to help in solving problems with Channel Vision W-4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Channel Vision W-4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
