Instruction/ maintenance manual of the product E-1200 Channel Vision
Go to page of 6
E SERIES 1200 Installation Instructions 234 F ISCHER A VENUE z C OSTA M ESA , CA 92626 (714) 424-6500 z (800) 840-0288 z (714) 42 4-6510 FAX http://w ww .
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. PROPER VENTILATION REQUIRED. NO USER - SERVICEABLE PARTS INSI DE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
E Series 1200 Basic Setup company input and the CVT combiner. This prevents the CVT signal from propagating back up the input line. Another way to preven t leakage from your system is to cap all unused coax cable ports on you network with appropriate terminators.
2. When laying out your system, there will be approximately 5dB of signal loss per 100' of RG6. 3. Be sure ALL of your splitters and amplifiers are broadband. Splitters should be 5MHz to 1GHz, and amps should be 40MHz to 1GHz. 4. Check and make sure that a ll televisions are set up for the proper frequency spectrum (i.
3 Check all connectors for 75 Ω . Noise on the Audio 1. Insert grounding block in line and ground coax cable before it enters the TV. 2. Use professional grade audio/video interconnect between the components and the modulator. Audio is Too Low Use a Y - Con nector to combine the left and right audio before entering the modulator.
RF Modulator PLL Synthesized Oscillator Video NTSC Audio L&R Monaural/Stereo loop opt. RF Carriers Frequency Stability +1K Hz Frequency Ranges UHF 471.25 - 855.25MHz Ultraband 469.25 - 859.25MHz Channels UHF 14 - 78, Ultraband 65 - 135 (Exc. 95 - 99) Channel Width 6.
An important point after buying a device Channel Vision E-1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Channel Vision E-1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Channel Vision E-1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Channel Vision E-1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Channel Vision E-1200 will certainly help you make a decision on the purchase.
If you already are a holder of Channel Vision E-1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Channel Vision E-1200.
However, one of the most important roles played by the user manual is to help in solving problems with Channel Vision E-1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Channel Vision E-1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
