Instruction/ maintenance manual of the product RIFMS2 Chamberlain
Go to page of 4
Car ton Inventor y Over view Assemble Intercom Model RIFMS2 Wireless Flush Mount Inter com Mounting Frame (2) 1 Intercom (2) Fastener (8) Screw (8) ® Channel Button: Press the Channel button to set intercom to one of four secure channels or the paging channel.
2 Programming Inter com Create New Netw ork The intercom must be programmed to at least one other intercom to become a network or it can be programmed into an existing network. Press and hold both buttons on the intercom for 5 seconds. An initial beep will be heard followed by a second beep.
3 Step 4 Place intercom in frame by inserting top section first, then snapping the lower section into place. Step 3 Place the frame in the hole and tighten screws. NO TE: Place frame in wall so that the two small slots are on the top and the larger single slot is on the bottom.
© 2007, The Chamberlain Group Inc. 1 14A3509 All Rights Reserved FOR TECHNICAL SUPPOR T DIAL OUR T OLL FREE NUMBER: 1-800-528-9131 www .chamberlain-DIY .
An important point after buying a device Chamberlain RIFMS2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chamberlain RIFMS2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chamberlain RIFMS2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chamberlain RIFMS2 you will learn all the available features of the product, as well as information on its operation. The information that you get Chamberlain RIFMS2 will certainly help you make a decision on the purchase.
If you already are a holder of Chamberlain RIFMS2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chamberlain RIFMS2.
However, one of the most important roles played by the user manual is to help in solving problems with Chamberlain RIFMS2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chamberlain RIFMS2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
