Instruction/ maintenance manual of the product 600A Chamberlain
Go to page of 9
Anleitungen – Garagentoröffner Modell LiftMaster 1000A, 800A, 600A Instructions – Modèle LiftMaster 1000A, 800A, 600A de ouvre-porte de garage Instructions – Garage Door Operator Model LiftMas.
Failure to comply with the following instructions may result in serious personal injury or property damage. • Read these instructions carefully • The garage door opener is designed and tested to offer reasonable safe service provided it is installed and operated in strict accordance with the instructions in this manual.
ASSEMBL Y SECTION IMPORT ANT : If you have a canopy door , you need to use the instructions packed with The Chamberlain Arm™ Accessory in conjunction with this Owner's Manual when assembling the rail.
Position the Opener NOTE: A 25mm (1") board (1) is convenient for setting an ideal door-to-rail distance (unless headroom is not sufficient). Raise the opener onto a stepladder . Open garage door . Place a 25mm (1") board (1) laid flat on the top section of door near the centerline as shown.
1 14A2910B-GB 7-GB Install Door Control Locate door control where the garage door is visible, away from door and door hardware and out of the reach of children. Mount at least 1,5 m (5 feet) above the floor . Serious personal injury from a moving garage door may result from misuse of opener .
1 14A2910B-GB 9-GB Program your Keyless Entry Activate the opener only when door is in full view , free of obstruction and properly adjusted. No one should enter or leave garage while door is in motion. Do not allow children to operate push button(s) or remote(s).
1 14A2910B-GB 1 1-GB Install the Protector System ™ (See accessories) Install this accessory for all installations on Canopy doors, One-Piece Door with Horizontal and V ertical Track , doors over 2.5m and when the closing force as measured on the bottom of the door is over 400N (40kg).
1 14A2910B-GB MAINTENANCE OF YOUR OPENER CARE OF YOUR OPENER When properly installed, opener will provide high performance with a minimum of maintenance. The opener does not require additional lubrication. Limit and Force Settings: These settings must be checked and properly set when opener is installed.
©2004, Chamberlain GmbH 1 14A2910B-GB All rights reserved GARAGE DOOR OPENER WARRANTY Chamberlain GmbH warrants to the first retail purchaser of this product that the product shall be free from any defect in materials and/or workmanship for a period of 24 full months (2 years) from the date of purchase.
An important point after buying a device Chamberlain 600A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chamberlain 600A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chamberlain 600A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chamberlain 600A you will learn all the available features of the product, as well as information on its operation. The information that you get Chamberlain 600A will certainly help you make a decision on the purchase.
If you already are a holder of Chamberlain 600A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chamberlain 600A.
However, one of the most important roles played by the user manual is to help in solving problems with Chamberlain 600A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chamberlain 600A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
