Instruction/ maintenance manual of the product Z340PL 3Com
Go to page of 6
Copyright © 1996 by Tektronix, Inc. All rights reserved. 063-2320-AA Instruction Sheet PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL This kit provides the components to give your printer PhaserLink™ capabilities.
2 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Impor tant! About the printer’ s IP address Upgrading the printer will erase the printer ’s IP address fr om the printer ’s non-volatile memory .
3 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Upgrading the printer Removing the main boar d Caution Do not tilt the printer . If you must move the printer to access the rear of the printer to install the upgrade, be car eful not to tip or tilt the printer .
4 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Replacing the P ostScript code R OM SIMM 3. Remove the currently installed PostScript code ROM SIMM in connector P71 by spreading apart the hook-like metal pawls securing each end of the SIMM in its connector .
5 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Replacing the print engine ROM 5. Locate the print engine ROM on the main board. Note Some products may use a standard ROM IC chip while others may use an adaptor circuit board (as show in the illustration below).
6 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL 8. Check for proper orientation and alignment of the pins; pin 1 should be oriented toward the network car d end of the main board. Also ensure the bins ar e not bent. Gently install the new ROM in its socket.
An important point after buying a device 3Com Z340PL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3Com Z340PL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3Com Z340PL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3Com Z340PL you will learn all the available features of the product, as well as information on its operation. The information that you get 3Com Z340PL will certainly help you make a decision on the purchase.
If you already are a holder of 3Com Z340PL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3Com Z340PL.
However, one of the most important roles played by the user manual is to help in solving problems with 3Com Z340PL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3Com Z340PL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
