Instruction/ maintenance manual of the product 1703EML Chamberlain
Go to page of 7
MODEL 1703EML - THE CHAMBERLAIN ARM™ INST ALLA TION INSTRUCTIONS T o be used in conjunction with the Chamberlain Garage Door Operator Owner’ s Manual Models: ML700, ML750, ML850 Before you begin, please read this entire instruction manual.
Planning Y ou may find it helpful to refer to the applicable illustration as you proceed with the installation of your garage door operator and The Chamberlain Arm™. The garage door opener must be installed parallel to the floor . Follow rail assembly instructions as shown in the Owner's manual.
5 6 1 3 2 4 1 2 3 Representative Locking Mechanism • Remove all door latching mechanisms (Figure 3), and secure any locking bars in the open position. • Remove inside door handle but leave the barrel in place in door (Figure 4). • Ensure that turning the outside handle will not actuate ANY of locking mechanism supplied with the door .
• Position the template horizontally to match up the centerlines of the header bracket and the template. Refer to Figure 8 or Figure 9, depending on your door style. • T o check, place the extension arm on the trolley into the slot on the template.
5 Door Arm Installation • With a 4.5mm (3/16") bit, drill two holes, 25mm (1") deep. T o prevent damage to garage door , do NOT drill through the entire door .
6 Garage door with lintel in line with the garage door Release the trolley and slide the connection arm into the slot of the door arm. Do not move the door arm. Leave in upright position. 1. T rolley 2. Connection Arm 3. Canopy Door Arm 4. Shipping cable tie 5.
Initial Operation: The Chamberlain Arm™ has been designed so that, when used with a Chamberlain manufactured operator , the door will open to a fully horizontal position (Figure 16). Note: The door may be designed in such a way that it does not open to the full horizontal.
An important point after buying a device Chamberlain 1703EML (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chamberlain 1703EML yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chamberlain 1703EML - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chamberlain 1703EML you will learn all the available features of the product, as well as information on its operation. The information that you get Chamberlain 1703EML will certainly help you make a decision on the purchase.
If you already are a holder of Chamberlain 1703EML, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chamberlain 1703EML.
However, one of the most important roles played by the user manual is to help in solving problems with Chamberlain 1703EML. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chamberlain 1703EML along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
