Instruction/ maintenance manual of the product RMC-TT30P CFM Corporation
Go to page of 16
1 Dyna-Glo Liquid Propane T ank T op Heaters USER’S INST ALLA TION, OPERA TION AND MAINTENANCE MANUAL MODELS: RMC-TT15 (PROP ANE, 15,000 BTU/HR), RMC-TT15P (PROP ANE, 15,000 BTU/HR) RMC-TT30 (PROP A.
2 T able of Contents Specifications General Hazard W arning Failure to comply with the precautions and instructions provided with this heater , can result in death, serious bodily injury and property loss or damage from hazards of fire, explosion, burn, asphyxiation and carbon monoxide poisoning.
3 General Safety Instructions Accidents are always tragic, especially because so many of them could have been prevented with a little care and judgement. The following are basic good practices, we hope you will follow for the safe use of your heater .
4 RMC101 Fig. 2 Attach heater to tank with tank collar bracket. Heater Regulator Knob Mounting Bolt Knob Inlet Connector Propane T ank V alve Piezo Fuel Connecting Nut Heater Assembly (Dual burner models only) The tank collar bracket must be assembled before the heaters can be attached to the propane tank.
5 Propane is heavier than air . If propane leaks from a connection or fitting, it sinks to the floor , collecting there with the surrounding air , forming a potentially explosive mixture. Obviously , propane leaks should be avoided, so set up the propane supply with utmost care.
6 Ignition Holes Air Inlet Hole Safety Shut-off V alve RMC105 Fig. 4 Place lit match under ignition hole. 3. Push in the safety shut-off valve plunger (Fig. 3) W ARNING: Do not push in safety shut-off valve plunger before inserting lit match. 4. Burner should light.
7 T echnical Service and Replacement Parts For assistance in servicing your heater and parts under warranty , contact the T echnical Service Department at 1-800-527-4948.
CFM RMC International 3501 W . Howard Street Skokie, IL 60076 1 800-527-4948 W arranty Service and Limited W arranty CFM RMC International warrants this product to be free from defects in materials an.
Dyna-Glo Calentadores montados en la parte superior de tanques de propano líquido MANUAL DE MANTENIMIENTO, OPERACIÓN E INST ALACIÓN DEL USUARIO P ARA LOS MODELOS: RMC-TT15 (15,000 BTU/HR, PROP ANO).
Índice Especificaciones ................................................................................................................................... 2 Instrucciones generales de seguridad .......................................................
Instrucciones generales de seguridad Los accidentes siempre son trágicos, especialmente porque muchos de ellos podían haberse evitado con un poco de cuidado y buen juicio. Las siguientes son buenas prácticas básicas, esperamos que usted las siga para usar de manera segura su calentador .
Conexión del calentador al tanque de propano Lea y familiarícese con toda la información de seguridad antes de conectar el calentador al tanque de propano. 1. (Se aplica solamente a los modelos de dos hornilla.) Coloque el calentador en el tanque con el soporte del collar del tanque sobre el collar del tanque (Fig.
Funcionamiento ADVERTENCIA: El quemador y el protector del quemador siempre deben estar orientados hacia el lado contrario de la válvula de cierre y del regulador del tanque de propano. ADVERTENCIA: La instalación, la alteración, el servicio o el mantenimiento incorrectos pueden causar daños materiales, lesiones o la muerte.
Instrucciones de encendido cuando se utiliza un fósforo Lea y familiarícese con toda la información de seguridad antes de operar el calentador . ADVERTENCIA: No levante las cabezas de los quemadores ni cubra los orificios de entrada de aire en el tubo de mezclado con el soporte del quemador .
Orificios de encendido Orificio de entrada de aire Safety Válvula de cierre de seguridad RMC105 Fig. 3 Coloque el fósforo debajo del orificio de encendido. 3. Oprima el émbolo de la válvula de cierre de seguridad (Fig. 3) ADVERTENCIA: No oprima el émbolo de la válvula de seguridad antes de insertar el fósforo encendido.
Garantía Servicio y garantía limitada CFM RMC International garantiza este producto contra defectos en materiales y componentes por un (1) año a partir de la fecha original de compra, siempre que el producto haya sido instalado, operado y mantenido correctamente y de acuerdo con todas las instrucciones correspondientes.
An important point after buying a device CFM Corporation RMC-TT30P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CFM Corporation RMC-TT30P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CFM Corporation RMC-TT30P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CFM Corporation RMC-TT30P you will learn all the available features of the product, as well as information on its operation. The information that you get CFM Corporation RMC-TT30P will certainly help you make a decision on the purchase.
If you already are a holder of CFM Corporation RMC-TT30P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CFM Corporation RMC-TT30P.
However, one of the most important roles played by the user manual is to help in solving problems with CFM Corporation RMC-TT30P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CFM Corporation RMC-TT30P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
