Instruction/ maintenance manual of the product 211 Century
Go to page of 38
CENTURY ® L E G E N D A R Y L E A D E R S H I P OWNER'S MANUAL 211 / 212 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities.
LIMITED WARRANTY MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original purchaser that each new MILLER wrecker or other MILLER products will be free from .
Section VI - P ARTS This Section is provided by the manufacturer for the purpose of ordering any component part of the CENTUR Y 21 1 or 212 WRECKER that may be required when part replacement is necessary .
VI-2 Section VI - P ARTS (cont'd) BODY ASSEMBL Y - 86" WIDE.
VI-3 REF . NO. P AR T NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) BODY ASSEMBL Y - 86" WIDE 1 1 0802629 BODY WELDMENT , 60 C.
VI-4 Section VI - P ARTS (cont'd) BODY ASSEMBL Y - 80" WIDE.
VI-5 REF . NO. P AR T NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) BODY ASSEMBL Y - 80" WIDE 1 1 0802637 BODY WELDMENT , 60 C.
VI-6 Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 21 1 (Continued on Page VI-8).
REF . NO. P AR T NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 21 1 (Continued on Page VI-9) 1 1 0802537 MAIN BOOM WELDMENT 2 1 0802510 OUTER BOO.
VI-8 Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 21 1 (Continued from Page VI-6).
REF . NO. P AR T NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 21 1 (Continued from Page VI-7) 29 1 0800735 GUIDE, CABLE 30 1 0301531 "U&quo.
VI-10 Section VI - P ARTS (cont'd) CONTROL & CROSSROD ASSEMBL Y - 21 1.
VI-11 REF . NO. P AR T NO. REQ'D NUMBER DESCRIPTION 1 4 0400527 CLEVIS PIN, 5/16" DIA COTTERLESS SS 2 4 0400541 COTTER PIN, 1/16" X 3/4" 3 4 0704529 CROSSROD - WRECKER (86" WI.
VI-12 Section VI - P ARTS (cont'd) WINCH HYDRAULICS - 21 1 1 2 0300044 CONNECTOR, 1/2" SAE "O" RING X 1/2" X JIC 2 1 0300090 MOTOR, CHAR-L YNN HYDRAULIC 3 2 0300229 ELBOW , 8MJ-8MP90 4 2 0301893 HOSE, WINCH MOTOR 5 REF .
Section VI - P ARTS (cont'd) BOOM ELEV A TION HYDRAULICS - 21 1 VI-13 1 2 0300044 O-RING CONNECTOR 2 1 0300206 BRANCH TEE 3 1 0301425 CONNECTOR, MALE 4 4 0301620 O-RING ELBOW , 90° 5 1 0301855 M.
VI-14 Section VI - P ARTS (cont'd) UNDERLIFT HYDRAULICS - 21 1 1 3 0300044 O-RING CONNECTOR 2 1 0300052 O-RING ELBOW , 90° 3 4 0301522 O-RING CONNECTOR 4 3 031696 ELBOW , 90° 5 REF . 0301825 EXTEND CYLINDER 6 2 0301921 HOSE ASSEMBL Y , 128" 7 REF .
VI-15 Section VI - P ARTS (cont'd) PUMP & RESERVOIR HYDRAULICS - 21 1 1 1 0300052 O-RING ELBOW , 90° 2 2 0300055 BARB, 3/4" HOSE X 3/4" NPT 3 1 0300056 BARB, 1" NPT 4 33" 0300057 HOSE, 3/4" RETURN 5 9 FT .
VI-16 Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 212 (Continued on Page VI-18).
REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 212 (Continued on Page VI-19) 1 1 0802552 MAIN BOOM WELDMENT 2 1 0802510 OUTER BOOM.
VI-18 Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 212 (Continued from Page VI-16).
Section VI - P ARTS (cont'd) BOOM & UNDERLIFT ASSEMBL Y - 212 (Continued from Page VI-17) REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION 30 2 0301531 "U" BOL T (FROM 3/8" CA.
VI-20 Section VI - P ARTS (cont'd) CONTROL & CROSSROD ASSEMBL Y - 212.
VI-21 REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) CONTROL & CROSSROD ASSEMBL Y - 212 1 5 0400527 CLEVIS PIN, 5/16" DIA COTTERLESS SS 2 5 0400541 COTTER.
VI-22 Section VI - P ARTS (cont'd) WINCH HYDRAULICS - 212 REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION 1 4 0300044 CONNECTOR, 1/2" SAE "O" RING X 1/2" X JIC 2 2 0300090 MOTOR, CHAR-L YNN HYDRAULIC 3 4 0300229 ELBOW , 8MJ-8MP90 4 4 0301893 HOSE, WINCH MOTOR 5 REF .
Section VI - P ARTS (cont'd) BOOM ELEV A TION HYDRAULICS - 212 1 2 0300044 O-RING CONNECTOR 2 1 0300206 BRANCH TEE 3 1 0301425 CONNECTOR, MALE 4 4 0301620 O-RING ELBOW , 90° 5 1 0301855 MALE TEE.
VI-24 Section VI - P ARTS (cont'd) UNDERLIFT HYDRAULICS - 212 REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION 1 REF . 0300010 V A L VE, 4 SPOOL CONTROL 2 REF .
Section VI - P ARTS (cont'd) PUMP & RESER VOIR HYDRAULICS - 212 1 2 0300010 V A L VE, 3 SPOOL CONTROL 2 1 0301375 O-RING ELBOW , 90° 3 2 0300052 O-RING ELBOW , 90° 4 4 0300071 CLAMP , 1" HOSE 5 30" 0300057 HOSE, 3/4" RETURN 6 9FT .
VI-26 Section VI - P ARTS (cont'd) OUTER CROSSTUBE & PIVOT L-ARM ASSEMBL Y.
Section VI - P ARTS (cont'd) OUTER CROSSTUBE & PIVOT L-ARM ASSEMBL Y REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION 1 1 0802676 OUTER CROSSTUBE, R.H. 2 1 0802675 OUTER CROSSTUBE, L.H. 3 1 0802680 END PLA TE WELDMENT , R.H. 4 1 0802679 END PLA TE WELDMENT , L.
VI-28 Section VI - P ARTS (cont'd) WINCH ASSEMBL Y - HY -246.
VI-29 REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) WINCH ASSEMBL Y - HY -246 1 1 316083 BEARING CAP 2 1 316084 BEARING CAP 3 1 324161 JAW CLUTCH 4 1 328134 COVER 5 1 332007 DRUM "Y" 6 1 334163 GEAR R.H.
VI-30 Section VI - P ARTS (cont'd) WINCH CLUTCH CONTROL 2 ASSEMBLIES REQ'D FOR DUAL WINCH WRECKER 1 1 0300845 SPRING , COMPRESSION 2 1 0301532 "T" HANDLE 3 1 0301588 ADJUSTING YOKE.
Section VI - P ARTS (cont'd) HYDRAULIC CYLINDERS 1 2 IT -27B BOOM ELEV A TION CYLINDER (COMPLETE) 2 1 IT -97 SEAL KIT , BOOM ELEV A TION CYLINDER REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION REF .
VI-32 Section VI - P ARTS (cont'd) CROSSTUBE CABLE ADAPTER ASSEMBL Y 1 2 0400220 SCREW , 1/2"-13 X 5-1/2" HEX HD CAP GR5 ZP 2 1 0400277 SHOULDER BOL T , 5/8"-1 1 X 3/4" X 1-1/.
REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION Section VI - P ARTS (cont'd) LIGHT KIT -- 2 0301390 LIGHT , STOP AND TURN (COMPLETE) 1 2 0304125 LENS & BULB ASSEMBL Y 2 2 0304126 GROMMET & PLUG KIT 3 2 0304124 CHROME BEZEL 4 2 0304123 BEZEL MOUNTING SCREW REF .
VI-34 Section VI - P ARTS (cont'd) LIGHT KIT REF . NO. P ART NO. REQ'D NUMBER DESCRIPTION 1 4 0301741 LIGHT , SEALED MARKER, RED 2 2 0301742 LIGHT , SEALED MARKER, AMBER 3 6 0301740 MARKER LIGHT GROMMET 1 1 0300273 LICENSE PLA TE ILLUMINA TOR (COMPLETE) 2 1 0300512 BULB, LICENSE PLA TE ILLUMINA TOR REF .
NOTES.
CENTURY ® Miller Industries Towing Equipment Inc. 8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171 www.millerind.com.
An important point after buying a device Century 211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Century 211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Century 211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Century 211 you will learn all the available features of the product, as well as information on its operation. The information that you get Century 211 will certainly help you make a decision on the purchase.
If you already are a holder of Century 211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Century 211.
However, one of the most important roles played by the user manual is to help in solving problems with Century 211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Century 211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
