Instruction/ maintenance manual of the product 94996 Central Pneumatic
Go to page of 10
P AINT SPRA Y GUN W ASHER 94996 ASSEMBL Y AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2006 by Harbor Freight T ools ® .
Page 2 SKU 94996 For technical questions, please call 1-800-444-3353 Specications Solvent T ank 2.5 gallons T ank Capacity One spray gun and one cup Working Air Pressure 40 PSI Maximum Air Pressure 60 PSI Air Hose Size ¼ inch Overall Dimensions 14-1/2 (L) x 18 (W) x 30-1/2 (H) inches Weight 27 lbs.
Page 3 SKU 94996 For technical questions, please call 1-800-444-3353 10. A void unintentional starting . Be sure the switch is in the Off position when not in use and before plugging in air supply . 1 1. Stay alert . W atch what you are doing, use common sense.
Page 4 SKU 94996 For technical questions, please call 1-800-444-3353 Unpacking When unpacking, check to make sure all parts are included. Refer to the Assembly Drawing and Parts List located at the end of this manual. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual as soon as possible.
Page 5 SKU 94996 For technical questions, please call 1-800-444-3353 4. Place the Spray Gun intake Nozzle onto the Gun Rack connector (in T ank). See photo below . 5. Place the Spray Gun Cup on the T ank rack as shown below . It can be placed on its side (as shown below) or upside down on the Cup Holder , position #2.
Page 6 SKU 94996 For technical questions, please call 1-800-444-3353 9. Connect the air hose from the air compressor (not supplied) to the Air Inlet (upper right side of T ank). Please note: Only use compressed air with the Paint Spray Gun W asher . 10.
Page 7 SKU 94996 For technical questions, please call 1-800-444-3353 Draining Cleaning Fluid from T ank 1. Insert the end of the W aste Hose (left side of Fluid Basin) into an appropriate solvent bucket with lid. 2. T urn off the Output Hose Switch. 3.
Page 8 SKU 94996 For technical questions, please call 1-800-444-3353 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 9 SKU 94996 For technical questions, please call 1-800-444-3353 Assembl y Dra wing REV 07j; 09j.
Page 10 SKU 94996 For technical questions, please call 1-800-444-3353 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standa.
An important point after buying a device Central Pneumatic 94996 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Central Pneumatic 94996 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Central Pneumatic 94996 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Central Pneumatic 94996 you will learn all the available features of the product, as well as information on its operation. The information that you get Central Pneumatic 94996 will certainly help you make a decision on the purchase.
If you already are a holder of Central Pneumatic 94996, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Central Pneumatic 94996.
However, one of the most important roles played by the user manual is to help in solving problems with Central Pneumatic 94996. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Central Pneumatic 94996 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
