Instruction/ maintenance manual of the product 93909 Central Pneumatic
Go to page of 12
FRAMING NAILER 21° ANGLE / 10 GAUGE 9751 1 93909 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 2 SPECIFICA TIONS Nail Size .1 13” to .131” Thick Shank, 2” to 3-1/2” Long; 21° Full Head Magazine Capacity 60 Nails Operating PSI 70 to 125 PSI * Required A verage Air Flow 3 - 3.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 3 7. Do not overreach . Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 8. Use eye and ear protection . Always wear ANSI approved impact safety goggles and appropriate hearing protection.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 4 impaired while taking drugs. If there is any doubt, do not operate the tool. 18. Use proper size and type extension cord . If an extension cord is required, it must be of the proper size and type to supply the correct current to the compressor without heating up.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 5 UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 6 T esting The Full Sequential Safety T rip Mechanism W arning: Even though the nailer should be empty during this procedure, A LWA Y S point the Nailer at a piece of scrap wood when testing.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 7 OPERA TION NOTE: For additional references to the parts listed below , refer to the Assembly Diagram on page 1 1. 1. Adjust the Exhaust Cover (4) to direct exhaust as desired.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 8 T o Adjust The Depth T o Which A Nail Is Driven 1. The depth to which a nail is driven is controlled by the Safety (38). (See Figures B and C). 2. T o adjust the depth of drive, loosen the Screw (37).
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 9 SAFETY (38) RUBBER COVER (39) SCREW (37) FIGURE C Anytime any maintenance or repairs are done (including clearing jams), FIRST : 1. Disconnect the Nailer from the air hose. 2.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 10 INSPECTION, MAINTENANCE, AND CLEANING 1. CAUTION: Always disconnect the Framing Nailer from its compressed air supply source before performing any inspection, maintenance, or cleaning.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 1 1.
SKU 9751 1 93909 For T echnical Questions, Please Call 1-800-444-3353 Page 12 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
An important point after buying a device Central Pneumatic 93909 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Central Pneumatic 93909 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Central Pneumatic 93909 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Central Pneumatic 93909 you will learn all the available features of the product, as well as information on its operation. The information that you get Central Pneumatic 93909 will certainly help you make a decision on the purchase.
If you already are a holder of Central Pneumatic 93909, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Central Pneumatic 93909.
However, one of the most important roles played by the user manual is to help in solving problems with Central Pneumatic 93909. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Central Pneumatic 93909 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
