Instruction/ maintenance manual of the product 47868 Central Pneumatic
Go to page of 9
AIR HAMMER WITH 9 CHISELS ASSEMBL Y and OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .harborfreight.com For technical questions and replacement parts, please call 1-800-444-3353 Manual Revised 1 1h Model 47868 Copyright 2002 by Harbor Freight T ools ® .
Page 2 SKU 47868 Save This Manual Y ou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
Page 3 SKU 47868 8. Do not overreach . Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care . Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories.
Page 4 SKU 47868 W arning: Abrasive blasting with sand containing crystalline silica can cause serious or fatal respiratory disease. Exposure to crystalline silica may cause silicosis (a serious lung disease), cancer and death.
Page 5 SKU 47868 W arning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur . It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator .
Page 6 SKU 47868 Operation (continued) W arning! Always disconnect from the air source before examining or changing bits. Examine your chisels before using them. If a chisel is dull or cracked do not use it. Replace worn or broken chisels with approved replacement chi sels from Harbor Freight T ools 1.
Page 7 SKU 47868 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
Page 8 SKU 47868 Assembly Drawing 17 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 9 SKU 47868 90 Day W arranty Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
An important point after buying a device Central Pneumatic 47868 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Central Pneumatic 47868 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Central Pneumatic 47868 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Central Pneumatic 47868 you will learn all the available features of the product, as well as information on its operation. The information that you get Central Pneumatic 47868 will certainly help you make a decision on the purchase.
If you already are a holder of Central Pneumatic 47868, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Central Pneumatic 47868.
However, one of the most important roles played by the user manual is to help in solving problems with Central Pneumatic 47868. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Central Pneumatic 47868 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
