Instruction/ maintenance manual of the product NO.6167-F Cecilware
Go to page of 11
Thunder T iger Corporation guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty does not cover any components damaged by use or modification.
ITEMS SUPPLIED 2-Channel, surface radio with 2 high torque servos Glow Fuel, Methanol 10% to 20% Nitro 5% to 18% Caster / Synthetic Oil INTRODUCTION Thank you for the purchase of this Thunder T iger product. Y ou should enjoy many hours of trouble free use from this advanced R/C product.
1 INST ALLING THE RADIO GEAR skip if already assembled 2 a e b1 c h g i g b2 a. Disassemble the roll bar . b. Remove the 8 screws on the radio plate and two 3*10mm countersunk screws on the chassis. c. Install the steering / throttle servos onto the mounts with four tap screws.
3 3 a. Build the throttle/brake linkages as shown on the diagram. b. Secure the brake cam lever onto brake cam with set screw . c. Install the servo horn onto throttle sero output shaft. INST ALLING THROTTLE LINKAGE skip if already assembled c b a 2 INST ALLING STEERING SER VO LINKAGE skip if already assembled a b c c a.
5 a. Install the antenna into transmitter . b. Check the frequency printed on the transmitter crystal. c. Check the frequency printed on the receiver crystal, and make sure it matches with the transmitter crystal. Make sure no one will operate on the same frequency when you are.
8 a. Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel/stick to the left. The front tires/wheels should turn left accordingly . If not, flip the steering servo reverse switch. b. Return the steering wheel/stick to neutral.
10 a. To set the throttle/brake linkage, first the radio should be on and neutral; thus, the servo is at neutral position. b. With the servo at neutral, turn and adjust the brake adjust knob to a point where the brake lever almost engages the brake system, but not yet.
12 a b c a. Remove the cap from fuel bottle nozzle. b. Squeeze the fuel bottle, insert into fuel, and draw fuel into the fuel bottle. The fuel used should be methanol based model engine glow fuel (available at hobby shops) with 10% to 20% nitro content and 5% to 18% caster/synthetic oil content for lubrication.
a. T urn on the radio (transmitter first, then receiver). b. Clip the glow plug igniter onto engine's glow plug. c. Pull on the engine starter , release, repeat until the engine starts. Throttle maybe required to be opened momentarily , but release throttle back to neutral immediately after the engine starts.
9 W ARNING Thank you for purchasing a Thunder Tiger Product. Please read all instructions thoroughly before operation. 1. This product is not a toy . It is a high performance model product. It is important to familiarize yourself with the model, its manual, and its construction before assembly or operation.
10 SET -UP FRONT REAR CAMBER -2 ˚ More -, more steering More +, less steering CASTER 16 ˚ (max caster , all clips forward) More +, slow steering / fast exit More -, quick steering / slow exit TOE -1.
An important point after buying a device Cecilware NO.6167-F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cecilware NO.6167-F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cecilware NO.6167-F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cecilware NO.6167-F you will learn all the available features of the product, as well as information on its operation. The information that you get Cecilware NO.6167-F will certainly help you make a decision on the purchase.
If you already are a holder of Cecilware NO.6167-F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cecilware NO.6167-F.
However, one of the most important roles played by the user manual is to help in solving problems with Cecilware NO.6167-F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cecilware NO.6167-F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
