Instruction/ maintenance manual of the product GB2HC-CP-PC* Cecilware
Go to page of 10
Compact Cappuccino & Hot Chocolate Dispensers Models : •GB1CP •GB2CP •GB3CP •GB1HC-CP •GB2HC-CP •GB1HC-CP-PC* •GB2HC-CP-PC* GB 1HC-CP (shown) GB2 -CP (shown) Cecilware sells value.
2 Mechanical Specifications Model # Label No. of Hoppers Hopper Capacity (lb.) Width (in.) Dept (in.) Hight (in.) Tank (gal.) GB1CP Cappuccino 1 8 lb. 7.75 18.625 26 1.5 GB2CP Cappuccino 2 4 lb. 7.75 18.625 26 1.5 GB3CP Cappuccino 3 4 lb. 10.5 18.625 26 1.
3 I. INSTALLATION INSTRUCTIONS This equipment is to be installed to com ply with the applicab le Federal, State, or l ocal plumbing cod es having jurisdictio n. In addition: 1. A quick disconnect wat er connection or en ough extra coiled tubing (at le ast 2x the depth of the unit) so that the machine can be moved for cleaning under ne ath.
4 ADJUSTMENTS A. WATER FLOW ADJUSTMENTS, FLOW RATE The Unit Is Factory Adjusted To Dispen se Water At The Rate of 4 oz/sec. To increase or decrease fl ow, proceed as follows: 1. Remove Left side panel and loc ate Dispense Valv e mounted on tank , with Flow Adjuster facing up, underneath cold w at er reservoir.
5 COMPONENTS TEST A) Thermostat Adjustments: The Thermostat is factory set for proper dispense temperature of 190° F with the control shaft set to the maximum clockwise position. If field adjustments are needed proceed as follows: To DECREASE temperature, turn t he control shaft slightly in the COUNTERCLOCKWISE direction.
6 TROUBLESHOOTING GUIDE WARNING: To reduce the risk of electr ical shock unplug the dispenser power cord before repairing or replacing any internal components of the unit.. Before any attempt to replace a component be sure to check all electrical connections for proper contact.
7 CLEANING AND SANITIZING Sanitizing: All sanitizing agents in the food zone must comply with 21 CFR 178.1010. All food dispensing units should be sani tized periodically. All parts to be sanitized must be clean ed first. To prepare a sanitizing solution: Add 2 Tsp.
8 INTERNAL COMPONENTS IDENTIFICATION TANK ASSEMBLY SK89Q ITEM P/N QTY DESCRIPTION 1 SK88A 1 Tank Top 2 L681A M008A 1 1 Thermostat & Probe Thermostat Knob 3 G267A MO18A 1 1 Heater 120v 1700w Gasket, Tank Heater 4 P446A 4 1/4-20x5/8 SS SL Hex Washer Hd Scr 5 M461A 6 Silicone Seal (.
9 EXTERNAL COMPONENTS IDENTIFICATION ITEM P/N QTY DESCRIPTION 10 CD65A CD66A 1 2 Chamber Mount Chamber Mount Grommet 11 CD63A CD353 1 1 Whipping Chamber Whip Blade W/2flats 12 M884A 1 Extension Tube 1.
10.
An important point after buying a device Cecilware GB2HC-CP-PC* (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cecilware GB2HC-CP-PC* yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cecilware GB2HC-CP-PC* - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cecilware GB2HC-CP-PC* you will learn all the available features of the product, as well as information on its operation. The information that you get Cecilware GB2HC-CP-PC* will certainly help you make a decision on the purchase.
If you already are a holder of Cecilware GB2HC-CP-PC*, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cecilware GB2HC-CP-PC*.
However, one of the most important roles played by the user manual is to help in solving problems with Cecilware GB2HC-CP-PC*. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cecilware GB2HC-CP-PC* along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center