Instruction/ maintenance manual of the product F 88400 VI AEG
Go to page of 24
FAVORIT 88400 I EN DISHWASHER USER MANUAL.
CONTENTS 4 SAFETY INSTRU CTIONS 6 PRODUCT DES CRIPTION 7 CONTROL PANE L 8P R O G R A M M E S 10 OPTIONS 11 BEFORE F IRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLESHO OTING 20 TECHNICAL IN FORMATION ENVIRONMENT CONCERNS Recycle the material s with the symb ol .
FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it.
SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufa cturer is not re- sponsible if an incorre ct installation and use causes inju ries and damages. Always keep the instructions with the appliance for future reference.
• Use this appliance in a household envi- ronment. • Do not change the specification of this appliance. • Put knives and cutl ery with sharp points in the cutlery basket with the points down or in a hori zontal position. • Do not keep the appliance door open without supervision to prevent to fall on it.
PRODUCT DESCRIPTION 11 1 2 3 4 7 9 5 6 8 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent disp enser 9 Cutlery basket 10 Lower basket 11 Upper basket 6 www.
CONTROL PANEL 1 2 3 5 4 6 9 8 7 A B C 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchp ad Indicators Description Multitab indicator. ProBoost indicator.
PROGRAMMES Programme Degree of soil Type of load Programme phases Options 1) All Crockery, cutler y, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ÖKO PLUS 2) Heavy soil Crockery, cutler y, .
Consumption v alues Programme 1) Energy (kWh) Water (l) 0.6 - 1.2 7 - 13 1.1 - 1.2 10 - 11 0.8 - 0.9 8 - 9 0.7 7 0.7 - 0.8 8 - 9 0.9 - 1.0 8 - 9 1.1 - 1.
OPTIONS MULTITAB OPTION Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme durati on can increase. ÖKO PLUS This function decreases the temperature in the drying phase.
BEFORE FIRST USE 1. Make sure that the set level of the w a- ter softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local wa- ter authority to know the water hard- ness in you r area. 2. Fill the salt container.
Manual adjustment Turn the water hardness dial to the posi- tion 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in set- ting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.
FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas hers. Other products can cau se dam- age to the applianc e. The rinse aid, during the last rins- ing phase, helps to dry the dishes without streaks and stains.
DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make su re that the appli- ance is in setting mode. Refer to ’S ET- TING AND STARTING A PRO- GRAMM E’. • If the salt indicator is on, fill the salt container.
SETTING AND STARTING A PROGRAMME Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: • All the programme indicators come on. • The display shows two horizontal status bars.
• Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. There can be water on the sides and on the door of the appliance.
CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults. Make a check regularly and, if necessary, clean th em. CLEANING THE FILTERS C B A 1.
TROUBLESHOOTING The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. With some problems, the display shows an alarm code: • - The appliance does not fill with water.
THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possible solution The dishes are not clean . The filters are clogged. Clean the filters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled.
Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient .
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.
22 www.ae g.com.
ENGLISH 23.
www.aeg.com/shop 117911670 -A-412012.
An important point after buying a device AEG F 88400 VI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG F 88400 VI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG F 88400 VI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG F 88400 VI you will learn all the available features of the product, as well as information on its operation. The information that you get AEG F 88400 VI will certainly help you make a decision on the purchase.
If you already are a holder of AEG F 88400 VI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG F 88400 VI.
However, one of the most important roles played by the user manual is to help in solving problems with AEG F 88400 VI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG F 88400 VI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
