Instruction/ maintenance manual of the product F 88060 VI AEG
Go to page of 20
FAVORIT 88060 VI 0P EN User manual.
CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SAFETY INSTRUCTIONS Before the installation and use of the ap- pliance, carefully read the supplied in- structions. The manufa cturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the ap pliance for future reference.
WARNING! Dangerous voltage. • If the water inlet hose is damaged, im- mediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose.
2. PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper sp ray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutler y basket 11 Lower basket 12 Upper basket 2.
3. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay touchpad 4 Program touchpad 5 ExtraHygiene touchpad 6 ÖKO PLUS touchpad 7 Multitab touchpad 8 RESET touchpad 9 Indicators Indicators Description Salt indicator. It is always off while the programme operates.
Programme Degree of soil Type of load Programme phases Options 6 Normal soil Crockery and cut- lery Wash 55 °C Rinses ExtraHygiene 7 Normal or light soil Delicate crockery and glassware Wash 45 °C Rinses Dry ÖKO PLUS 8 6) All Prewash 1) The appliance senses t he degree of soil an d the quant ity of items in the baskets.
Programme 1) Duration (min) Energy (kWh) Water (l) 6 50 - 60 1.0 - 1.1 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
How to activate the ExtraHygiene option 1. Press ExtraHygiene . The related in- dicator comes on. In the display you can see the update of the p ro- gramme duration. 5.4 Acoustic signals The acoustic signals operate in these conditions: • The programme is completed.
6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.
6.2 Filling the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Put 1 litre of water in the salt con- tainer (only for the first time). 3. Fill the salt container with dishwash- er salt. 4. Remove the salt around the opening of the salt container.
5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ).
At the end of the programme The display shows 0 a nd the end indica- tor comes on. 1. Press the on/off button to deactivate the appliance. 2. Close the water tap. If you do not press the on/off button, the AUTO OFF function automatically deactivates the ap- pliance a few minutes after the end of the programme.
• Make sure that the s pray arms can move freely before you start a pr o- gramme. 8.4 Before starting a programme Make sure that: • The filters are clean and correctly in- stalled. • The spray arms are not clogged. • The position of the items in the bas- kets is correct.
6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides ( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance.
Problem Possible solution Make sure that the pr essure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 55 Electrical connection Refer to the rating plate. Volta ge 220-240 V Frequency 50 Hz Water supply pressure Min.
18 www.aeg.com.
ENGLISH 19.
www.aeg.com/shop 117931992-A-052012.
An important point after buying a device AEG F 88060 VI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG F 88060 VI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG F 88060 VI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG F 88060 VI you will learn all the available features of the product, as well as information on its operation. The information that you get AEG F 88060 VI will certainly help you make a decision on the purchase.
If you already are a holder of AEG F 88060 VI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG F 88060 VI.
However, one of the most important roles played by the user manual is to help in solving problems with AEG F 88060 VI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG F 88060 VI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
