Instruction/ maintenance manual of the product SK380 CDA
Go to page of 36
sk380 .. Multifunction Oven Manual for Installation, Use and Maintenance Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.
2 Important This appliance is designed and manufactur ed solely for the cooking of domestic (household) food and is not suitable for an y non domestic application and therefor e should not be used in a commer cial environment. The appliance guarant ee will be void if the appliance is used within a non domestic envir onment i.
3 IMPOR T ANT SAFETY PRE CAUTIONS AND RE CO MMEND A TIONS IMPOR T ANT : This appliance is designed and manufactur ed solely for the cooking of domestic (household) f ood and is not suitable f or any non domestic application and ther efor e should not be used in a c ommercial en vironment.
4 • Do not touc h the appliance with wet or damp hands (or f eet). • Do not use the appliance whilst in bar efoot. • If you should decide not to use this applianc e any longer (or decid.
5 • FIRS T USE OF THE OVEN - it is advised t o follow these instructions: – Furnish the int erior of the oven as described in the chapt er “CLEANING AND MAINTENANCE”. – Switc h on the empty oven on max to eliminate gr ease from the heating elements.
6 Contr ol Panel Contr ols Description 1 . Oven thermostat knob 2. Oven switc h knob 3. Clock and timer with “T ouch-Contr ol” keys W arning Lights: 4. P ower on indicator lamp 5. Oven thermostat indicator light Please Not e: This appliance incorporates a saf ety cooling fan which y ou will hear operating whenever the oven or grill are in use.
7 Multifunction Ov en Gener al Featur es As its name indicates, this is an oven that pr esents particular featur es from an operational point of view .
8 How t o Use the Ov en W ARNING: The door is hot, use the handle. A TTENTION - MOS T IMPORT ANT Pa y special attention no t to touc h the hot heating element inside the ov en cavity . Thermostat Knob (Fig. 2) This only sets the cooking temper ature and does not switc h the oven on.
9 T r aditional Grilling The infrar ed grill element comes on. The heat is dispersed by r adiation. Use with the ov en door closed . The temperatur e can be regulated via the thermost at knob to between 50 °C and 225 °C . For cooking hints, see the c hapter “USE OF THE GRILL ”.
10 V entilated Grill C ooking The infrar ed grill element and the fan come on. The heat is dispersed mainly by radiation and the fan then distributes it all ov er the oven. Use with the ov en door closed. The temperatur e can be regulated via the thermost at knob to between 50 °C and 225 °C .
11 Cooking A dvice St erilization Sterilization of f oods to be conserved, in full and hermetically sealed jar s, is done in the following way: a. Set the switc h to position . b. Set the thermostat knob to position 1 85 °C and preheat the oven. c. Fill the grill pan with hot water .
12 Roasting T o obtain classical roasting, it is necessary to r emember: – that it is advisable to maintain a temper ature betw een 1 80 °C and 200 °C. – that the cooking time depends on the quantity and the type of foods. Use of the Grill – Preheat the ov en for about 5 minutes with the door closed .
13 Clock and T imer with “T ouch-C ontr ol” K eys K eys and T ouched simultaneously (for mor e than 2 seconds): – setting the clock; – setting the timer volume (by touc hing once, along with the “ ” key); – to cancel automatic c ooking at any time.
14 “T ouc h-Control” K eys The “touch-c ontrol” keys should be oper ated by the fingers (just by touc hing the key). When using touch contr ols it is best to use the ball of your finger r ather than the tip.
15 Aut omatic Cooking Use automatic cooking to aut omatically turn the oven on, cook, and then turn the oven off. 1 . Check the cloc k shows the correct time. 2. Select the function and temperatur e (function and temperatur e knobs). The oven will come on.
16 Do’s and do not’s – Do always grill with the ov en door closed. – Do read the user instructions car efully befor e using the oven for first time.
17 Car e and Maintenance It is advisable to clean when the appliance is c old and especially for cleaning the enamelled parts. Av oid leaving alkaline or acidic substances (lemon juice, vinegar , etc.) on the surfaces. Av oid using cleaning products with a chlorine or acidic base.
18 St ainless Steel, Aluminium, P ainted Parts and Silk -screen Printed Surfac es Clean using an appropriat e product. Alwa ys dry thoroughly. Stainless st eel surfaces: can be cleaned with an appropriate st ainless steel cleaner . IMPOR T ANT : these parts must be cleaned very carefully to a void scratc hing and abrasion.
19 Stop not ch Guard r ail Fig. 6 Fig. 5 Assembling and Dismantling of the Side R unner Fr ames – Assemble the wire r acks to the oven w alls using the 2 screws (Fig.
20 Replacing the Halogen Ov en Lights W ARNING: Ensure the appliance is s witched o ff before r eplacing the lamp to a void the possibility o f electric shock. - Allow the oven cavity and the heating elements t o cool down; - Switch off the electrical supply; - Remove the pr otective cov er C (fig.
21 Ov en Door Remo ving and Replacing the Inner Door Glass Pane for Cleaning If you wish to clean the inner glass of the door , make sure you f ollow the precautions and instructions very car efully. Replacing the glass pane and the door incorr ectly may r esult in damage to the oven and may v oid your warranty.
22 Remo ving the Ov en Door The oven door can easily be r emoved as follows: - Open the door to the full extent (fig. 8a). - Open the lever A completely on the left and right hinges (fig. 8b). - Hold the door as shown in fig. 8. - Gently close the door (fig.
23 2 1 2 1 2 Remo ving the Inner Pane o f Glass The oven door is fitted with no. 2 panes: - no. 1 outside; - no. 1 inner . T o clean all panes on both sides it is necessary to remov e the inner pane as follows: Remo ve the Inner Glass Retainer 1 . Remove the ov en door and place it on a soft surface.
24 Remo ve the Inner Glass P ane Lift and remov e the inner pane slightly , as shown in the figure 1 0. 1 2 1 2 Fig. 1 0.
25 1 2 1 2 A fter Cleaning, Replace the Inner Glass P ane When replacing the inner glass pane, mak e sure that: - you replac e the pane correctly , as shown.
26 1 2 M M M 2 1 click click Replac e the Glass Retainer 1 . Position the glass r etainer , as shown in the figur e 1 2. It should sit on the bottom edge of the out er glass. Check that the clamps M are not def ormed or damaged. 2. Gently push the glass ret ainer back into place.
27 A Refit the Door 1 . Hold the door firmly (fig. 1 3). 2. Insert the hinge tongues into the slots, making sur e that the groove dr ops into place as shown in the figur e 1 4. 3. Open the door to its full extent. 4. Fully close the lever s A on the left and right hinges, as shown in the figure 1 5.
28 AD VICE FOR THE INST ALLER Important Appliance installation and maint enance must only be carried out by QU ALIFIED TECHNICIANS and in compliance with the local saf ety standards. •Failur etoobservethisrulewillinvalidat ethewarranty.
29 853 896 478 544 22 min. 550 480 467 min. 860 853 896 478 544 22 min. 550 480 467 min. 860 min. 900 Fig. 1 6 Fig. 1 7.
30 Fixing the Ov en Introduc e the oven into the furniture opening and fix it with 4 scr ews (not supplied) as figur e 1 8. It is essential that the oven r ests on a surface which will support its weight, as the scr ew fixing is only complementary .
31 OVEN DOOR LOWER TRIM AIR FLOW IMPOR T ANT : T o a void damage to the lo wer trim please no te the follo wing instructions. The lower trim is designed to allow f or good air circulation and the corr ect opening of the oven door .
32 Mains Electricity Connection Incorr ect installation may be danger ous and the manufacturer can no t be held responsible. W arning! This appliance must be earthed The manufacturer declines all r esponsibility for any pr oblem caused by failur e to observ e this rule.
33 Connection o f the Po wer Supply Cable Unhook the terminal boar d cover by inserting a screwdriv er into the two hooks A (fig. 2 1). Open the cable gland by unscrewing scr ew F (fig.
34 Appliance Servicing CDA pr ovide a quality and effective aft er -sales service to cover all your servicing needs. Please attac h your receipt t o this page for safekeeping. Please help us to help you by ha ving the following information a vailable when booking a service-call: 1 .
35.
Please contact our Customer Care Department, or for Service on the details below . Cod. 1104703 - ß2 Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .
An important point after buying a device CDA SK380 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA SK380 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA SK380 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA SK380 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA SK380 will certainly help you make a decision on the purchase.
If you already are a holder of CDA SK380, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA SK380.
However, one of the most important roles played by the user manual is to help in solving problems with CDA SK380. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA SK380 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
