Instruction/ maintenance manual of the product SC620 CDA
Go to page of 24
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .
2 Important This appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may lead to premature failure of the appliance. The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product.
3 Appliance Model Serial Number CE Declarations of Conformity: This oven has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC (L ow voltage) and requirements of EMC Directive 2004/108/EEC.
4 Important • R ead the user instructions carefully before using the oven for the first time. • Follow the instructions for first use of the oven. • Clean the oven regularly . • R emove spills as soon as they occur . • Always use oven gloves when removing shelves and trays from the ovens.
5 • Do not attempt to repair the internal workings of your oven. • Do not cover the oven floor with aluminium foil. First Use of the Oven First use • The metal casing of this appliance has been coated with a preservative to protect it during transport and storage.
6 Please note: • This oven has been fitted with a cooling fan to achieve maximum eciency and to maintain low surface temperatures. The cooling fan will switch on automatically when the oven switches on.
7 Defrost Using the fan only this oven function circulates the air around the oven cavity , speeding up the natural defrost process (1kg takes appro ximately one hour , depending on the type of food).
8 For each grill function please note: • Always grill with the oven door closed. • Put the grill pan as close to the grill as possible. • Do not grill for more than 30 minutes at a time. • Preheat the grill for up to five minutes with the oven door closed.
9 Programming the Oven Please note: • The alert beep will cut o after two minutes if it is not switched o manually . Setting the clock The clock is preset to 12:00 , and will revert to this after a power failure. When the current time indicator is flashing, touch or .
10 T o set the minute minder: • T ouch repeatedly until the minute minder indicator flashes. • Then touch or to select the required duration for the minute minder . When the correct duration shows on the display , either touch or wait for appro ximately five seconds.
11 Automatic cooking: The main oven can be set to switch on and o automatically at preset times up to a maximum of 10 hours. T o set an automatic cooking programme, follow the steps for setting a semi-automatic programme above, and then: • T ouch until the end of cooking time indicator flashes.
12 Care and Maintenance IMPORT ANT Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
13 IMPORT ANT : • Steam cleaners must not be used when cleaning this appliance . • Once care and maintenance is complete, ensure that all parts are correctly replaced before using the oven.
14 Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
15 IMPORT ANT Never replace the bulb with bare hands as contamination from your fingers can cause premature failure. Always use a clean cloth or gloves. Please note: The bulb replacement is not covered by your guarantee. R eversing the Door This oven can be converted from left hand hinged to right hand hinged if necessary .
16 R emoving the Oven Door Inner Glass The oven door inner glass can be removed to facilitate cleaning. • Fully open the door . • R emove the four A fixing screws from the door hinge. • R est the door on a soft surface. • Use a screwdriver to prise the inner glass from the frame as shown in fig 4.
17 Installation Important If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it could restrict ventilation. Ensure that air can flow freely around the housing area.
18 Dimensions Oven Housing Height (mm) 595 600 Width (mm) 595 560 Depth (mm) 563.5 560 (min) fig. 5 600 560 595 595 595 542 554 24 40 560 600 to the housing by fitting screws into these holes. R emember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
19 Electricity Supply to Y our Oven W arning! this appliance must be earthed. This appliance must be connected by a competent person, using fix ed wiring via a double pole switched fused spur outlet, protected by a 13A fuse. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.
20 NO TES:.
21 NO TES:.
22 NO TES:.
23 Attribute Symbol Value Units Model Identification SC620 Mass of the appliance M 30 kg Number of cavities 1 Heat source per cavity (electricity or gas.
Please contact our Customer Care Department for Service on the details below . Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www.
An important point after buying a device CDA SC620 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA SC620 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA SC620 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA SC620 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA SC620 will certainly help you make a decision on the purchase.
If you already are a holder of CDA SC620, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA SC620.
However, one of the most important roles played by the user manual is to help in solving problems with CDA SC620. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA SC620 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
