Instruction/ maintenance manual of the product HN6110 CDA
Go to page of 28
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
2 Important The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment.
3 2004/108/EC. Parts intended to come into contact with food conform to 89/109/EC. IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC.
4 surface prior to use. • Do not modify the appliance in any way as this will invalidate the guarantee and is potentially dangerous. • The hob top is not designed for any use other than cooking: any other use (e.g. as a worktop) is potentially dangerous and will invalidate the guarantee.
5 capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children shall not play with the appliance. • Cleaning and user maintenance shall not be made by children without supervision.
6 divider must be made of material capable of withstanding 65°C above ambient temperature. • Never place inammable items or materials in a drawer or cupboard below the hob. Precautions in the event of an appliance fault • If a fault is noticed, switch o the appliance and turn o the electricity supply .
7 FOR THOSE WITH HEART P A CEMAKERS OR A CTIVE IMPLANTS: The function of this hob conforms to current electromagnetic interference standards and thus is in total compliance with legal requirements (2004/108/CE directives).
8 Cooking On Induction The principle of induction cooking is based on magnetic eect. When you put your cookware on an induction zone and switch it on, the electronic boards in the hob produce induced currents in the base of the cookware and instantly raise its temperature.
9 Using Y our Hob Fig. 1 Control panel: 3. Power key 4. Timer display 5. Zone selection keys 6. Zone displays 7 . - key 8. + key 9 . Timer control light Zones: 1. Front L eft 1.85 kW 175 mm 2. R ear Left 1.4 k W 175 mm 3. R ear Right 1.85 kW 175 mm 4.
10 Using Y our Hob The table below oers guidance as to what each power level is for . T o switch the hob on T o switch the power on, touch and hold the key for appro ximately two seconds. The hob will beep and all zone displays will show zero. Please note: If a power level is not set within ten seconds, the hob will switch o automatically .
11 T o turn the power o T o switch o a single zone, touch the “Selection” key for the zone no longer required. T ouch the “-” key until the zone display shows zero. When all zones are at zero, the hob will switch o automatically after appro ximately ten seconds.
12 • T ouch both the “+” and “-” keys at the same time to select the timer . The timer display will show “00” . • Set the required duration using the “+” or “-” keys within ve seconds. T ouching the “-” key will go straight to 30 minutes.
13 Minute minder When no cooking zones are being used, the timer can be used as a minute minder . T o Set the Minute Minder • T ouch both the “+” and “-” keys at the same time to select the timer . The timer display will show “00” . • Set the required duration using the “+” or “-” keys within ve seconds.
14 T o turn o the key lock If the hob is not already turned on, turn it on by touching the key . T ouch the “-” key and the “Zone selection” key for the front right zone at the same time, then touch just the “-” key . The hob beeps to conrm the key lock is switched o , then the hob switches o .
15 zone. The zone will switch o after appro ximately one minute if no suitable pan is placed on the zone. Ecient Use of Y our Hob The hob is equipped with zones of dierent sizes, designed to accommodate most shapes and sizes of pan.
16 Care and Maintenance Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance. Important: • S team cleaners must not be used when cleaning this appliance. • Y ou should use a non-abrasive cleaner to clean the hob top.
17 In the event of a fault with the hob, please advise CD A Customer Care of any fault code shown on the display Contact CD A Customer Care A: Customer Care Department, The CD A Group Ltd, Harby R oad, Langar , Nottinghamshire, NG13 9HY T: 01949 862 012 F: 01949 862 003 E: service@cda.
18 In use Y ou observe that Possible Causes What should you do ? One or all of the zones cuts out. The safety system has cut out. Leave hob to cool then try it again A cooking zone has been running for a very long time Switch it on again (if required).
19 IMPORT ANT - PLEASE NOTE: In the event of any breakage , crack or cracking – even minimal – of the vitroceramic glass, immediately disconnect your appliance to prevent a risk of electric shock and contact CD A Customer Care. IMPORT ANT : When correctly installed, your product meets all safety requirements laid down for this type of product.
20 damage to the hob and constitutes incorrect installation, which is not covered by the warranty . Notes: • This could be a simple slot cut out of the plinth, or a dedicated ventilation grille. • The furniture top rail should not be fitted to the unit.
21 temperature. • Never place perishable foods, soft items such as tea towels, cleaning products or ammable items in the cupboard or drawer below the appliance. • If an oven is to be installed below the hob, the thermal safety system on the hob may not allow the hob to be used at the same time as a pyrolytic programme on the oven.
22 How to Install the Hob: Overall dimensions of the hob: Width: 590 mm Depth: 520 mm W orktop cut-out dimensions: Width: 560 mm Depth: 490 mm 1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the required clearance.
23 Mains Electricity Connection W arning! this appliance must be earthed W e recommend that the appliance is connected by a qualied electrician, who is a member of the N.
24 connection bo x. • As the appliance is not tted with an accessible plug, a means of disconnection from the power supply must be must be included in the fix ed insatllation, in accordance with the installation regulations. • The inlet cable must be positioned so that it does not touch any of the hot parts of the hob or oven.
25 The following diagram shows the mains connection: * Calculated using the diversity factor following the standard EN 60 335-2-6/1990 . Any service call arising from incorrect installation may result in a charge.
26 NO TES.
27 NO TES.
Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
An important point after buying a device CDA HN6110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA HN6110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA HN6110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA HN6110 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA HN6110 will certainly help you make a decision on the purchase.
If you already are a holder of CDA HN6110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA HN6110.
However, one of the most important roles played by the user manual is to help in solving problems with CDA HN6110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA HN6110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
