Instruction/ maintenance manual of the product HCG622 CDA
Go to page of 12
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style Manual for Inst allation, Use and Maintenanc e HCG601, HCG611, HCG621 Hob Manual.
Important The CDA Gr oup Ltd cannot be held r esponsible for injuries or losses caused by incorr ect use or installation of this product. Please note that CDA reserv e the right to invalidate the guarant ee supplied with this product following incorr ect installation or misuse of the appliance or use in a commer cial envir onment.
Using your hob Fig. 1 2 3 5 4 6 7 8 9 Gas burners: 1 . 2. Left semi-r apid burner 1 .75kW 3. Right semi-rapid burner 1 .75kW 1 .0kW 5. Rapid burner 3.0kW Contr ol panel: 6. T riple Ring/Rapid burner control knob 7 . Left Semi-Rapid burner c ontrol knob 8.
Igniting the Burners T o ignite the burners, follo w these instructions: 1 . clockwise to the maximum position. Pr ess and hold the control down t o begin the igni tion pr ocess (a cli cking sound will be hear d). 2. T o tur n the burne r off, turn the knob cloc kwise past the maximu m set ting to the off p ositi on.
Corr ect use of the optional W ok Pan A daptor The w ok pan adapt or is a special st and that is designed to be fitted ov er the T riple Ring burner to give support t o r ound bottomed w oks. When using a wok, always place the wok pan adaptor in position over the pan support on the T riple Ring burner as shown in Fig.
Car e and Maintenanc e As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner . Any abrasive cleaner (including Cif) will scr atch the surface and could erase the control panel markings.
DOUBLE POLE SWIT CHED FUSE SPUR OUTLET USE A 3 AMP FUSE Mains Electricity Connection THIS APPLIANCE MUST BE C ONNECTED T O THE MAINS SUPPL Y BY A C OMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSE SPUR OUTLET AND PRO TECTED BY A 3A FUSE.
Gas Supply Requir ements IMPOR T ANT : THIS APPLIANCE SHOULD BE FITTED BY A GAS S AFE REGIS TERED FITTER OR O THER SUIT ABL Y QUALIFIED PERSON. • This installation must comply with the Gas Saf ety (installation and use) Regulations 1 984. • This appliance is category II2H3+ and is designed f or use in the UK and Ireland.
Natur al Gas to LPG Con v ersion This hob can be converted from natural gas to pr opane operation at a nominal inlet pressure of 37mbar , or butane operation at a nominal inlet pressur e of 28/30mbar . This conver sion must only be carried out by a competent person (i.
Fitting the Hob Unpacking the hob: T ake care not to lose or mishandle an y parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 1 85mm away from any adjacent vertical surfaces, e.g.
How t o install the hob: Overall dimensions of the hob: Width: 585mm Depth: 500mm W orktop cut-out dimensions: Width: 550mm Depth: 4 70mm 1 . Make the requir ed hole in the worktop. Befor e doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the requir ed clearance.
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style T o contact our Customer Car e Department, or for Service, please contact us on the det ails below .
An important point after buying a device CDA HCG622 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA HCG622 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA HCG622 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA HCG622 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA HCG622 will certainly help you make a decision on the purchase.
If you already are a holder of CDA HCG622, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA HCG622.
However, one of the most important roles played by the user manual is to help in solving problems with CDA HCG622. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA HCG622 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
