Instruction/ maintenance manual of the product HC6310 CDA
Go to page of 12
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
2 The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment.
3 IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling services.
4 User Information Please note: • Ceramic hobs become hot and remain hot during and immediately after use. Do not touch the hob until it has been allowed to cool. • K eep children away from the appliance when in use. • Never put cooking foil or plastic materials on the ceramic surface when the hob is hot.
5 Using your hob Zones: 1. Front left 1. 7 k W 180 mm 2. Back left 1.2 k W 145 mm 3. Back right 1. 7 k W 180 mm 4. Front right 1.2 kW 145 mm Control panel: 5. Front right zone control 6. Back right zone control 7 . Back left zone control 8. Front left zone control 9 .
6 Ecient Use of your Hob The hob is equipped with zones of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose appropriate zones depending on the sizes of the pans. The most ecient use of the hob is shown below , where the pans and zones are correctly chosen.
7 Choose pans which are between the sizes recommended in the table above, and with bases that are as non-reflective as possible, e .g. dull and dark. Only pans recommended for use on ceramic hobs should be used. Care and Maintenance Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.
8 Mains Electricity Connection W arning! This appliance must be earthed W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.
9 Fig.3 Use a 32A fuse breaker link wire Insert a flat blade screwdriver to open the terminals Fitting The Hob Unpacking the hob: T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 180mm away from any adjacent vertical surfaces, e.
10 If fitting a cooker hood above the hob: If a cooker hood is to be installed above the hob, the height of the hood above the hob must be at least 600mm (650mm is recommended) (Fig.5). If the instructions supplied with the hood dictate that the hood must be installed at a height greater than 600mm, then that height is the minimum required.
11 How to Install the Hob How to install the hob: Overall dimensions of the hob: Width: 580mm Depth: 510mm W orktop cut-out dimensions: Width: 560mm Depth: 490mm 1. Make the required hole in the worktop. Note that before doing this, check the instructions supplied with any cooker hood to ensure that you will have the required clearance.
Please contact our Customer Care Department, or for Service on the details below . Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .
An important point after buying a device CDA HC6310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA HC6310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA HC6310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA HC6310 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA HC6310 will certainly help you make a decision on the purchase.
If you already are a holder of CDA HC6310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA HC6310.
However, one of the most important roles played by the user manual is to help in solving problems with CDA HC6310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA HC6310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
