Instruction/ maintenance manual of the product DC740 CDA
Go to page of 24
Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .
2 Important This appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may lead to premature failure of the appliance. The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product.
3 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CD A Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.
4 Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.
5 • Do not perform maintenance or cleaning of the oven without first switching o the electricity supply . If the oven has recently been used, allow to cool. • Do not place hot enamel parts in water . Leave them to cool first. • Do not allow vinegar , coee, milk, saltwater , lemon or tomato juice to remain in contact with enamel parts.
6 T op oven 15 minutes full grill 60 minutes conventional Lower oven 60 minutes fan oven Please note: • This oven has been fitted with a cooling fan to achieve maximum eciency and to maintain low surface temperatures.
7 Oven Controls and Use Cooking function knob T o set the function, turn the cooking function knob for the required oven clockwise to the required function. Each of the oven functions uses dierent elements within the oven to oer you the best choice of cooking every time.
8 When grilling, please note: • Always grill with the oven door closed. • Put the grill pan as close to the grill as possible. • Do not grill for more than 30 minutes at a time. • Preheat the grill for appro ximately five minutes with the oven door closed.
9 T emperature knob • T o set the temperature , turn the temperature knob for the required oven clockwise to the required temperature. • Once the oven has reached the required temperature, the temperature indicator lamp on the control panel will switch o .
10 Programming the Oven Please note: • The semi-automatic and automatic cooking programmes will only work with the main oven. • The alert beep will cut o after two minutes if it is not switched o manually . Setting the clock The clock is preset to 12:00 , and will revert to this after a power failure.
11 The minute minder The minute minder can be used when the oven is switched on or o . It can be set for up to 23 hours and 59 minutes. T o set the minute minder: • T ouch repeatedly until the minute minder indicator flashes. • Then touch or to select the required duration for the minute minder .
12 Programming the Oven Semi-automatic cooking The main oven can be set to switch o automatically at a preset time up to a maximum of 10 hours. T o set a semi-automatic cooking programme: • Select the oven function and temperature (the oven will switch on).
13 • T ouch until the end of cooking time indicator flashes. • Then touch or to select the required end of cooking time. When the correct time shows on the display , wait for appro ximately five seconds. The cooking time and end of cooking time indicators will remain lit to confirm the automatic programme is on.
14 Proprietary stainless steel cleaners are available. W e recommend the CD A E-Cloth available from the CD A Sales T eam for cleaning stainless steel surfaces as this has been designed to prolong the finish of your appliance. Inside of Oven The oven should always be cleaned after use when it has cooled down.
15 Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance.
16 IMPORT ANT Never use screwdrivers or other utensils to remove the light cover . This could damage the enamel of the oven or the lamp holder . R emove only by hand. IMPORT ANT Never replace the bulb with bare hands as contamination from your fingers can cause premature failure.
17 Oven Door R emoving the Oven Door The oven door can easily be removed as follows: • Open the door to the full extent (fig. 4). • Open the lever A completely on the left and right hinges (fig. 5). • Hold the door as shown in fig. 3. • Gently close the door (fig.
18 Mains Electricity Connection W arning! This appliance must be earthed T o connect this appliance to a UK standard mains supply , connect the bridging links between 1-2-3 for the live feed and 4-5 for the neutral feed. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.
19 Fig.9 Green/yellow Blue Brown Feed the mains lead through the cable clamp to prevent accidental disconnection. Tighten the cable clamp securely and close the connector cover .
20 Installation Important Failure to allow adequate ventilation to the appliance may result in overheating or damage to adjacent units and could invalidate the warranty . The diagram below shows the minimum required. This appliance is type X installation.
21 fig. 10 Dimensions Oven Housing Height (mm) 890 877 Width (mm) 595 560 Depth (mm) 540 560 (min) DC940 Dimensions Oven Housing Height (mm) 718 720 Width (mm) 595 560 Depth (mm) 540 560 (min) DC740 .
22 NO TES:.
23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CD A reserve the right to change specifications without prior notice. Attribute Symbol Units Model Identification DC740 DC940 Mass of the appliance M 43.
Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .
An important point after buying a device CDA DC740 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA DC740 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA DC740 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA DC740 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA DC740 will certainly help you make a decision on the purchase.
If you already are a holder of CDA DC740, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA DC740.
However, one of the most important roles played by the user manual is to help in solving problems with CDA DC740. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA DC740 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
