Instruction/ maintenance manual of the product 3Z9 CDA
Go to page of 12
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
Important The manufacturer cannot be held r esponsible for injuries or losses caused by incorrect use or inst allation of this product. Please note that the manufactur er reserves the right t o invalidate the guar antee supplied with this product f ollowing incorr ect installation or misuse of the appliance or use in a commer cial envir onment.
Using your Extr actor For best perf ormance, you should switc h on the extractor 1 5 minutes befor e starting to cook and lea ve it to run for appro ximately 1 5 minutes after the end of c ooking.
Car e and Maintenanc e IMPOR T ANT : DO NO T PERFORM MAINTENANCE OR CLEANING OF THE EXTRACT OR WITHOUT FIRST SWIT CHING OFF THE ELECTRICITY SUPPL Y . Cleaning Y ou should use a nonabrasiv e cleaner . Any abrasive cleaner (including Cif) will scratc h the surface and could er ase the control panel markings.
Changing the Light IMPOR T ANT : DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRA CTOR WITHOUT FIRS T SWIT CHING OFF THE ELECTRICITY SUPPL Y . DO NO T CHANGE THE LIGHT BULB IMMEDIA TEL Y AFTER USE AS THE BULB WILL BE HOT . ALL OW IT T O COOL BEFORE REM OVING IT .
5 DOUBLE POLE SWIT CHED FUSED SPUR OUTLET USE A 3 AMP FUSE Mains Electricity Connection THIS APPLIANCE MUST BE C ONNECTED T O THE MAINS SUPPL Y BY A C OMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSED SPUR OUTLET AND PRO TECTED BY A 3A FUSE.
6 Installation Y our extract or can be used to filter and r ecycle the air within your kitc hen, or to extract the air outside. When extr acting air to the outside, the unit can be vented as shown in the diagr am below . Note that we r ecommend the use of ducting with a diameter of 1 50mm.
7 Installation The extractor is mount ed using five screw s. Ensure that the wall fixings and scr ews are suit able for the wall material. Mark the positions of the five holes on the wall, acc ording to (fig 6). Insert five wall plugs into the holes A and B (fig.
8 Using the extr actor as a r ecir culation device Prise off the vent outlet cover using a scr ewdriver , as shown in fig 1 2 and assemble as shown in fig 1 3. Using the extr actor as an extr action device Feed the duct pipe thr ough the top cover and fix it t o the duct adapter ring.
9.
10.
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Passionate about style T o c ontact our Customer Car e Department, or for Service, please contact us on the det ails below .
An important point after buying a device CDA 3Z9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CDA 3Z9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CDA 3Z9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CDA 3Z9 you will learn all the available features of the product, as well as information on its operation. The information that you get CDA 3Z9 will certainly help you make a decision on the purchase.
If you already are a holder of CDA 3Z9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CDA 3Z9.
However, one of the most important roles played by the user manual is to help in solving problems with CDA 3Z9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CDA 3Z9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
