Instruction/ maintenance manual of the product TS 8011 Catler
Go to page of 16
TS 8011 4 SLICE SMART TOASTER Instructions for use.
4 SLICE SMAR T TO ASTER.
C ONTENTS 2 Congratulations 4 CA TLER Recommends Safe ty First 6 Know Y our TS 8011 T oaster 7 Operating Y our T S 8011 T oaster 8 TO AST/CANCEL button 8 A BIT MORE button 9 CRUMPET button 9 DEFROST b.
C ongratulations on the purchase of your new TS 8011 T oaster . 2 CONGRA TULATIONS.
At Catler , we are proud of our innovations . Our appliances are designed to be the best in their class. When we set out to design this toast er we were determined to create an ex ceptional toaster , one that would stand proud in any kitchen.
CA TLER REC OMMENDS SAFETY FIRST W e at Catler are very safety conscious. We design and manufacture consumer products with the safety of you , our valued customer , foremost in mind .
5 5 CA TLER RECOMMENDS SAFETY FIRST • Fully unwind the po wer cord befor e use. • Do not let the power cord hang over the edge of a table or counter , touch hot sur faces, or become knotted. • T o protect against electric shock, do not immerse power cor d, power plug or appliance in water or any other liquid.
6 K N OW Y O U R T S 8011 TOAS T E R KNOW YOUR TS 8011 TO ASTER Extra wide slots with self centring carriage DEFROST button Automatic LIFT & L OOK Brushed diecast body Independent variable brownin.
OPERA TING Y OUR T S 8011 TOA S T ER 7 7 OPERA TING YOUR TS 8011 TOASTER Before first use , remove an y packaging material or promotional labels attached to your t oaster . 1. Inser t the power plug into a 230/240 V power outlet then turn the pow er on.
6. Approximately 10 sec onds before the end of the selected browning setting, the Lift & Look button will cease illumination. A s the toasting stops and the carriage rises, the TO AST/CANCEL button surround will flash and the LED toasting progr ess indicator will cease flashing.
9 9 OPERA TING YOUR TS 8011 TOASTER flash, the LED toasting progr ess indicator will cease flashing and the A BIT MORE button surround will cease illumination. The LED toasting progr ess indicator will re-illuminate to the previously selected browning setting .
10 OPERA TING YOUR TS 8011 TO ASTER 4. The Lift & Look button surround will illuminate in blue allowing you to check on the toasting progr ess and, if necessary, cancel the cycle by pressing TOAST/CANCEL button when the desired toast colour is achieved.
11 11 1. Switch the toaster off at the po wer outlet and then remove the po wer plug from the power outlet. Allow the toast er to cool completely befor e cleaning. 2. T o clean any crumbs from the toaster , remove the crumb tra y, locat ed under the control panel at the front of the toast er , by pulling it outwards.
12 NO TE:.
13 13 NO TE:.
WWW.CATLER.EU CUSTOMER SERVICE INFO@CATLER.EU Due to continued product improvement, the pr oducts illustrated/photographed in this brochure may vary slight- ly from the actual product.
An important point after buying a device Catler TS 8011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Catler TS 8011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Catler TS 8011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Catler TS 8011 you will learn all the available features of the product, as well as information on its operation. The information that you get Catler TS 8011 will certainly help you make a decision on the purchase.
If you already are a holder of Catler TS 8011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Catler TS 8011.
However, one of the most important roles played by the user manual is to help in solving problems with Catler TS 8011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Catler TS 8011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
