Instruction/ maintenance manual of the product OS 1.0 Cateye
Go to page of 16
® Model OS1.0 REFERENCE GUIDE personal cyclocomputer E.
2 OS 1.0 Introduction Thank you very much f or purchasing the CA T EYE OS 1.0. Read "SETUP GUIDE" first, for the installation and the basic oper ation of the product. Read this "REFERENCE GUIDE" when you want to kno w more about the CA T EYE OS 1.
OS 1.0 3 1. Buttons See how the f our buttons work in the various modes . ST ART/STOP b utton (ENTER) Normally this button starts and stops timer that eff ects the other functions like a ver age speed, etc. When measuring, the speed scale icon flashes.
4 OS 1.0 2. Functions Current Speed Current Speed alwa ys displays in the upper displa y . The data is updated once a second. When the font siz e is 100%, Current Speed appears be- tween Clock Time and Elapsed Time and is indicated by the flashing Spd icon.
OS 1.0 5 Pace arrow The pace arrow indicates if the current speed is f aster or slower than the av erage speed. If the current speed is equal to the a verage speed, both arrows appear . Eco mode (Sleep mode) When the main unit is left without receiving any signal f or about five min- utes, the displa y goes blank.
6 OS 1.0 3. Restart/Format/Setup Restart operation (1.When erratic data appears; 2.After replacing battery) After replacing the battery , the electric current can be unstable which might effect the oper ation of the OS1.0. T o av oid this y ou must press the REST ART button after replacing the battery .
OS 1.0 7 Setup finished 70:30(%) 50:50(%) 30:70(%) 100(%) Custom setup T o personalize your Cat Ey e OS1.0, select YES in e Custom setup prompt. Function customizing Y ou can choose to displa y just the functions you would lik e. Press EN- TER/ST ART/ST OP button to select each function you would lik e to dis- play .
8 OS 1.0 FWD ( SELECT ) REV ( SELECT ) FWD ( SELECT ) REV ( SELECT ) FWD ( SELECT ) REV ( SELECT ) MENU ENTER ( ST ART / STOP ) ENTER ( ST ART / STOP ) 4. Menu Screen When MENU button is pressed, the screen changes from measuring screens to menu screens.
OS 1.0 9 Data review Checks and re views the accumulated data of the past. Press MENU button again to return to measuring screen. Last ride day data Shows all the data measured in the last ride da y (0:00 - 23:59 or midnight to midnight). When the clock passes mid- night, the da y's data is memorized as the "last ride day data".
10 OS 1.0 Menu Screen (contin ued) Function setting The function setting screens allow y ou to change various programmed functions. At any time press MENU button to return to normal mea- suring screens. Note: By pressing the two SELECT/MODE but- tons simultaneously you can go bac k to the previous on screen.
OS 1.0 11 Date setting Changes the date setting. It is important to input the correct date as it affects the accumulated data. Function customizing Selects only your f avorite functions that you want to use (ref er to page 12). Display contrast setting Adjusts the contrast of the screen (right: dar ker , left: lighter).
12 OS 1.0 Menu Screen (contin ued) How to change setting Tire size setting A or B - Chooses y our bike, A or B. • Press SELECT/MODE button to select A or B . • Press ENTER/ST ART/ST OP to decide. SIZE --- Changes the figure of the tire sizes A and B.
OS 1.0 13 5. T roubleshooting If a malfunction occurs, chec k the following items before contacting a dealer f or ser vice. T rouble Check items Remedy The liquid crystal screen appears dark or there are some dark spots. W as it left for a long time under direct sunlight? It will go back to normal after a fe w hours once it is out of the sunlight.
14 OS 1.0 6. Specifications CA T EYE OS1.0 Display functions Current Speed 0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h] Elapsed Time 0:00 ’ 00 ” - 9:59 ’ 59 ” T rip Distance 0.00 - 99999.99 mile [km] Av erage Speed 0.0 - 65.9 mph [0.0 - 105.9 km/h] Maximum Speed 0.
OS 1.0 15 Optional parts 1 Bracket sensor kit [169-9650] 2 Bracket sensor kit (Long) [169-9651] 3 Speed sensor kit [169-9670] 4 Speed sensor kit (Long) [169-9671] 5 Brack et [169-9660] 6 Magnet [169-9.
REGISTRA TION CARD Model: CA T EYE OS1.0 Serial No. Please fill with 7-digits numbers marked on the back of main unit. Name: Age: Street: City: State/Providence: Postal/ZIp code: Country: E-mail address: (*We will never share your e-mail address with any other company.
An important point after buying a device Cateye OS 1.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cateye OS 1.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cateye OS 1.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cateye OS 1.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Cateye OS 1.0 will certainly help you make a decision on the purchase.
If you already are a holder of Cateye OS 1.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cateye OS 1.0.
However, one of the most important roles played by the user manual is to help in solving problems with Cateye OS 1.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cateye OS 1.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
