Instruction/ maintenance manual of the product MA14-E Casio
Go to page of 16
·É¿¹Æ»È·Ê¿ÅÄÉ »Ä»È·ÂË¿º» ⑦ .
Using the Crown The watch’s crown is a screw-in (screw lock) type. To use the crown, you first need to rotate it towards you (leftwards) to loosen it. Loosen Crown Important! ● To prevent loss of water resistance and/or damage due to impact, be sure to push the crown in and lock it when not in use.
Charging Times Light Intensity Charge Level 1 Charge Level 2 High p Low A 3 hours 33 hours B 8 hours 122 hours C 12 hours 197 hours D 133 hours - Charge Level 1: Time from dead battery until hand move.
Note ● For details about setting procedures, see your phone documentation. C Pairing the watch with a phone Before you can use the watch in combination with a phone, you first need to pair them. Once the watch is paired with a phone, you normally do not need to pair them again.
World Time City Settings Setting a World Time City for CASIO WATCH+ causes the current time in that city to be indicated by the hands of the dial at 9 o’clock. W orld Time hour (24-hour) W orld Time hour and minute Note ● CASIO WATCH+ World Time lets you select from among approximately 300 cities as the World Time City.
Example: Recording a Race Lap Time This section explains how to record lap times while watching a race, and then review the results using CASIO WATCH +. 30 ● Before a race Configure course length and speed unit settings. l Viewing Speed Data ● During a race Measure lap times.
Note ● The types of accounts listed below are supported for registration. @gmail.com, @yahoo.com, @yahoo.co.jp, @icloud.com, @aol.jp, @aol.com, @aim.com, @i.softbank.jp, @outlook.jp, @outlook.com ● Checking for Mail 1. X If the watch is connected with a phone, press (D).
ÅÄÄ»¹Ê¿ÅÄ ·Ä¹»Â¿Ľ·ÅÄÄ»¹Ê¿ÅÄͿʾ· ¾ÅÄ» Bluetooth mark Connected .
Note ● Note that the actual operation you need to perform depends on the type of phone you are using. For details, see your phone documentation. ● Clearing Pairing Information from the Watch 1. X Pull out the crown to the second click. Crown 2. X Hold down (D) for about 5 seconds.
3. Press (A). This enables the month and day setting operation. 4. Press (B) to change the month. 8 9 10 3 4 2 5 7 11 1 6 12 Day Month 5. Rotate the crown to change the day. 6. Press (A). This enables the year 10’s digit setting operation. 7. Rotate the crown to change the year 10’s digit.
Measuring a Split Time 30 Speed Minutes Hours 24-hour Seconds 1. Use the operations below to measure elapsed time. B D B Stop Split* Start * Each press of (D) causes the elapsed time up to that point (split time) to be indicated for 10 seconds. 2. Press (D) to reset the elapsed time to all zeroes.
8. Press (A). This enables adjustment of second hand alignment. Second Hand 9. Rotate the crown to align the second hand with 12 o’clock. 10. Press (A). This enables adjustment of day indicator alignment. 1 Day indicator 11. Rotate the crown to align the 1 in the center of the day indicator.
● Stopping Radio Wave Emission by This Watch The watch is emitting radio waves whenever the second hand is pointing to e (Bluetooth connected) or R (Bluetooth connection standby). Even if the second hand is not pointing at e or “R”, the watch will attempt to connect with a phone once a day to update its time settings.
Q3 The watch is in the Airplane Mode. Exit the watch’s Airplane Mode. Then hold down the CONNECT button (C) for about 0.5 seconds. 30 Q4 I changed the phone’s Bluetooth from enabled to disabled, and now I can’t connect anymore.
Checking Email (Check Emails) Q1 What types of mail accounts can be checked for mail? @gmail.com, @yahoo.com, @yahoo.co.jp, @icloud.com, @aol.jp, @aol.com, @aim.com, @i.softbank.jp, @outlook.jp, @outlook.com Q2 How many mail accounts can be configured for incoming mail alert? The CASIO WATCH+ supports registration of up to five mail accounts.
Q4 All hands are stopped at 12 o’clock and buttons do not work. The battery is dead. Keep the watch exposed to light until the battery recharges sufficiently. l Charging the Watch Q5 The hands suddenly start moving at high speed. This is due to one of the reasons below, and does not indicate malfunction.
An important point after buying a device Casio MA14-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio MA14-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio MA14-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio MA14-E you will learn all the available features of the product, as well as information on its operation. The information that you get Casio MA14-E will certainly help you make a decision on the purchase.
If you already are a holder of Casio MA14-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio MA14-E.
However, one of the most important roles played by the user manual is to help in solving problems with Casio MA14-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio MA14-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
