Instruction/ maintenance manual of the product MA1012-EA Casio
Go to page of 8
Operation Guide 5193 E-1 ENGLISH Congratulations upon your selection of this CASIO watch. This watch does not have a city code that corresponds to the UTC offset of –3.5 hours. Because of this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland, Canada.
Operation Guide 5193 E-10 Charging the Watch The face of the watch is a solar cell that generates power from light. The generated power charges a built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed to light.
Operation Guide 5193 E-20 Approximate Reception Ranges UK and German Signals North American Signal Anthorn 500 kilometers 1,500 kilometers Mainfl ingen The Anthorn signal is receivable within this area.
Operation Guide 5193 E-31 Selecting a Mode With this watch, everything starts from the Timekeeping Mode. To determine the watch’s current mode Check the position of the v Left Dial Hand as shown under “To select a mode” (page E-32).
Operation Guide 5193 E-40 Use 4. D (+) and B (–) to change the time (hour and minute) setting. Each press of either button will move the hands ( x z Hour Hand and c Minute Hand ) one minute. Holding down x D or B will start high-speed z Hour Hand and c Minute Hand movement in the applicable direction.
Operation Guide 5193 E-50 To stop the alarm Press any button. Note Pressing any button while the alarm is sounding simply stops the alarm sound. x It does not stop the elapsed time operation that started when the end of the countdown was reached. To stop the elapsed time operation, press B .
Operation Guide 5193 E-60 Hold down 2. D for about three seconds until the watch beeps. The watch is now in the home position adjustment x mode. The watch will exit the adjustment mode automatically x if you do not perform any operation for about two or three minutes.
Operation Guide 5193 E-70 ■ Auto Receive is not performed or I cannot perform Manual Receive. Possible Cause Remedy Page The watch is in the Stopwatch Mode or Countdown Timer Mode. Auto Receive is not performed while the watch is in the Stopwatch Mode or Countdown Timer Mode.
An important point after buying a device Casio MA1012-EA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio MA1012-EA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio MA1012-EA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio MA1012-EA you will learn all the available features of the product, as well as information on its operation. The information that you get Casio MA1012-EA will certainly help you make a decision on the purchase.
If you already are a holder of Casio MA1012-EA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio MA1012-EA.
However, one of the most important roles played by the user manual is to help in solving problems with Casio MA1012-EA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio MA1012-EA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
