Instruction/ maintenance manual of the product MA0410-EA Casio
Go to page of 9
Operation Guide 3731 1 MA0410-EA The Power Saving feature of the watch is turned on at the factory . • Power Saving causes the watch to turn off the display automatically and enter a sleep state to save power whenever the watch is left in the dark.
Operation Guide 3731 2 The power supply of this watch uses a solar cell to generate electrical power , which is stored by a rechargeable battery . Using or storing the watch where it is not regularly .
Operation Guide 3731 3 ❚ To specify the illumination duration 1. In the Timekeeping Mode, hold down the A A A A A button for about two seconds. • This will cause the currently selected time zone to flash on the display , and the second hand to move to 12 o’clock.
Operation Guide 3731 4 ❚ To view the last reception date and time In the Timekeeping Mode, press the B B B B B button. • This causes the display to start alternating between the last reception date and the last reception time at two-second intervals.
Operation Guide 3731 5 Using the Alarms Y ou can set up to five independent daily alarms. An alarm sounds for 10 seconds when an alarm time is reached. ❚ To view the alarm time or target alarm time In the Alarm Mode, press the B B B B B button to cycle through the alarm screens in the sequence shown below .
Operation Guide 3731 6 The stopwatch measures elapsed time in units of 1/100 second up to 59 minutes, 59.99 seconds (60 minutes). When the maximum limit is reached, the elapsed time automatically returns to zero and timing continues from there. Performing a lap/split operation automatically stores lap/split times in memory (up to 50 records).
Operation Guide 3731 7 3. While any record is displayed, you can press the A A A A A button to toggle between the lap time and split time displays. Split Time Lap Time Clearing Lap/Split Time Memory Records • Starting a new elapsed time operation from zero deletes all lap and split time data currently in lap/split time memory .
Operation Guide 3731 8 Y ou can use the following procedure to set the current time and date of the T imekeeping Mode Home Time Zone. • Always use the T imekeeping Mode to set and adjust current time and date settings. If you are planning to manually change both the digital and analog settings, be sure to adjust the digital setting first.
Operation Guide 3731 9 4. Press the C C C C C button to move the flashing between the hour and minute settings. 5. Use the D D D D D (+) and B B B B B (–) buttons to adjust the hour and minute hand positions. • Each press of the D button moves the hands 20 seconds clockwise, while the B button moves them 20 seconds counterclockwise.
An important point after buying a device Casio MA0410-EA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio MA0410-EA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio MA0410-EA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio MA0410-EA you will learn all the available features of the product, as well as information on its operation. The information that you get Casio MA0410-EA will certainly help you make a decision on the purchase.
If you already are a holder of Casio MA0410-EA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio MA0410-EA.
However, one of the most important roles played by the user manual is to help in solving problems with Casio MA0410-EA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio MA0410-EA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
