Instruction/ maintenance manual of the product ma-1203-EB Casio
Go to page of 9
Operation Guide 5143 E-9 While crown button mode switching is disabled, pressing the crown button will x cause the x Second Hand to move to the 3 o’clock position. The x Second Hand will resume normal timekeeping when you release the crown button. To re-enable crown button mode switching Hold down the crown button as you press A .
Operation Guide 5143 E-19 Level Hand Movement Function Status 1 Normal. All functions enabled 2 x x Second Hand moves at two-second intervals. n n Day changes to 1 (home position). Beeper and countdown timer operation disabled 3 x x Second Hand stopped.
Operation Guide 5143 E-29 > Timekeeping Mode Stopwatch Split Mode (Elapsed time and split times) Alarm Mode Countdown Timer Mode Mode pointer points to TM . Mode pointer points to ST . Then v Mode Disk rotates until the split pointer points to STP (stopped) or RUN (running).
Operation Guide 5143 E-39 Change the Home City and daylight saving time (DST) 2. settings, if you want. For details about these settings, see steps 3 and 4 x under “To confi gure Home City settings” (page E-32). Hold down 3. B for about two seconds.
Operation Guide 5143 E-49 The x b Chronograph Signal changes in accordance the operation being performed: STP (stopped), RUN (running), or SPL (split). STP (stopped) RUN (running) SPL (split) * * * Note The Stopwatch Split Mode can indicate elapsed time up to 59 minutes, x 59.
Operation Guide 5143 E-59 To perform a countdown timer operation A A B Start Stop Reset Pressing x B while the Countdown Timer is stopped resets the displayed time to the start time specifi ed by you. Pressing x B will not perform a reset while the watch is performing any of the following operations.
Operation Guide 5143 E-69 To check whether a time zone is AM or PM In the World Time Mode, press B and the x Second Hand will move to either A (AM) or P (PM).
Operation Guide 5143 E-79 Crown Operations The watch seems to change modes on its own. ■ The watch will change modes whenever you press the button part of the crown. You can disable mode switching when the crown button is pressed, if you want. See “To disable crown button mode switching” (page E-8).
Operation Guide 5143 L-2 x Based on data as of December 2010. x The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country.
An important point after buying a device Casio ma-1203-EB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio ma-1203-EB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio ma-1203-EB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio ma-1203-EB you will learn all the available features of the product, as well as information on its operation. The information that you get Casio ma-1203-EB will certainly help you make a decision on the purchase.
If you already are a holder of Casio ma-1203-EB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio ma-1203-EB.
However, one of the most important roles played by the user manual is to help in solving problems with Casio ma-1203-EB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio ma-1203-EB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
