Instruction/ maintenance manual of the product GW-A1100-1A3ER Casio
Go to page of 11
Operation Guide 5311 E-9 2. Check the Home City. Use the procedure under “To confi gure Home City settings” (page E-36) to confi gure your Home City. Important! x Proper time calibration signal reception depends on correct Home City, time, and day settings in the Timekeeping Mode.
Operation Guide 5311 E-19 Power Saving Power Saving enters a sleep state (second hand sleep or function sleep) whenever the watch is left for a certain period in an area where it is dark.
Operation Guide 5311 E-29 Note x To interrupt a receive operation and return to the Timekeeping Mode, press any button. To check the result of the latest receive operation In the Timekeeping Mode, press B . The x Second Hand will move to Y ( YES ) or N ( NO ) to indicate the last calibration signal receive result.
Operation Guide 5311 E-39 To switch between standard time and summer time manually 1. Perform steps 1 and 2 under “To confi gure Home City settings” (page E-36). x Selecting a city code will cause the z Hour Hand , c Minute Hand , and v Upper Dial Hand to move automatically to the current time for the selected city code.
Operation Guide 5311 E-49 Hand Indicators z Hour Hand x Second Hand: Points to magnetic north. c Minute Hand b Lower Dial Hand: Points to the day of the week. * B @ + E-48 Taking Direction Readings The watch has a magnetic sensor that makes it possible to take digital compass readings.
Operation Guide 5311 E-59 4. Press A to start calibration. x After about seven seconds, the x Second Hand will move to Y ( YES ) if calibration was successful or to N ( NO ) if it was not successful. x If the x Second Hand is pointing at N ( NO ) (unsuccessful), press A to perform calibration again.
Operation Guide 5311 E-69 Using the Stopwatch You can use the stopwatch to measure elapsed times. A fl yback feature (page E-70) lets you reset the stopwatch to zero without stopping time measurement. Hands and Indicators z Hour Hand: Indicates the stopwatch minute count (1 revolution = 60 minutes).
Operation Guide 5311 E-79 Adjusting Home Positions Strong magnetism or impact can cause the hands and/or day indicator setting to be off, even if the watch is able to perform the time calibration signal receive operation. Auto Home Position Adjustment Auto correction of hand home positions corrects the hand position automatically.
Operation Guide 5311 E-89 Charging ■ The watch does not resume operation after I expose it to light. This can happen after the power level drops to Level 3 (page E-16). Continue exposing the watch to light until the x Second Hand starts moving normally (at one-second intervals).
Operation Guide 5311 L-1 City Code T able E-97 Power Supply: Solar panel and one rechargeable battery Approximate battery operating time: 6 months (no exposure to light after a full charge; 10 seconds.
Operation Guide 5311 L-5 x This table shows the city codes of this watch. (As of December 2012) x The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country. x The summer time periods in this table are applicable to specifi c cities.
An important point after buying a device Casio GW-A1100-1A3ER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Casio GW-A1100-1A3ER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Casio GW-A1100-1A3ER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Casio GW-A1100-1A3ER you will learn all the available features of the product, as well as information on its operation. The information that you get Casio GW-A1100-1A3ER will certainly help you make a decision on the purchase.
If you already are a holder of Casio GW-A1100-1A3ER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Casio GW-A1100-1A3ER.
However, one of the most important roles played by the user manual is to help in solving problems with Casio GW-A1100-1A3ER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Casio GW-A1100-1A3ER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
